-
Your Job
Georgia-Pacific's Project & Engineering Group is seeking a remote based Project Manager to join our Regional Projects Teams.
The Regional Project teams focus is on development and delivery of projects typically ranging from $500k - $10 million.
This position is expected to manage projects within the South or East region of the United States.
This position is a remote position however frequent travel will be required therefore preferred candidates should reside within close proximity to an airport and/or driving distance to sites supported.
Major Southern and Eastern Sites are in the following locations:
- Muskogee, OK
- Monticello, MS
- New Augusta, MS
- Naheola, AL
- Perdue Hill, AL
- Memphis, TN
- Brunswick, GA
- Cedar Springs, GA
- Savannah, GA
- Palatka, FL
Other locations considered for our Dixie Plant support:
- Fort Smith, AR
- Jackson, MS
- Bowling Green, KY
- Lexington, KY
- Darlington, SC
Our Team
The Project & Engineering team works across the United States working with our facilities on project development and execution.
We are project professionals focused on a quality delivery of prioritized projects.
We partner with our mills/plants/businesses as "one team, one vision, one result".
What You Will Do
• Interface with Project Management Organization (PMO), Businesses and Plant Leadership to develop and deliver small projects (up to $5M) to reduce cost, increase capacity, improve safety, and sustain operations
• Provide Project Leadership to 10-20 projects at a time that are in various phases of the project work process and various/multiple locations in the appropriate Region
• Promote team culture that is focused on meeting commitments while maintaining a safety excellence
• Empower project team members to understand and accept their accountabilities by ensuring project delivery expectations are clearly defined to meet the project objectives.
• Provide leadership to remove project obstacles by working with, and through, others.
• Facilitate interface between design-build partners and internal GP partners (mill/business)
• Provide oversight for project status (cost, schedule, risk), GP procedure equipment and services, and project change management
• Ensure coordination with facilities for integrating project startup (Day 1 Readiness)
• Drive a continuous improvement mindset using lean construction principles
• Manage portfolio of project metrics and benchmarks to attain targets/improvement
Who You Are (Basic Qualifications)
• 3 or more years of experience working within a manufacturing or military environment
• 3 or more years of experience of project and/or construction management of industrial / manufacturing construction projects
• Experience with project and construction management systems and concepts
• Able to travel regionally at least 50%-75% of the time (Project Dependent Fluctuates)
What Will Put You Ahead
• Bachelor's Degree or higher in Enginee...
....Read more...
Type: Permanent Location: Perdue Hill, US-AL
Salary / Rate: Not Specified
Posted: 2024-04-16 08:14:40
-
Your Job
Georgia-Pacific's Project & Engineering Group is seeking a remote based Project Manager to join our Regional Projects Teams.
The Regional Project teams focus is on development and delivery of projects typically ranging from $500k - $10 million.
This position is expected to manage projects within the South or East region of the United States.
This position is a remote position however frequent travel will be required therefore preferred candidates should reside within close proximity to an airport and/or driving distance to sites supported.
Major Southern and Eastern Sites are in the following locations:
- Muskogee, OK
- Monticello, MS
- New Augusta, MS
- Naheola, AL
- Perdue Hill, AL
- Memphis, TN
- Brunswick, GA
- Cedar Springs, GA
- Savannah, GA
- Palatka, FL
Other locations considered for our Dixie Plant support:
- Fort Smith, AR
- Jackson, MS
- Bowling Green, KY
- Lexington, KY
- Darlington, SC
Our Team
The Project & Engineering team works across the United States working with our facilities on project development and execution.
We are project professionals focused on a quality delivery of prioritized projects.
We partner with our mills/plants/businesses as "one team, one vision, one result".
What You Will Do
• Interface with Project Management Organization (PMO), Businesses and Plant Leadership to develop and deliver small projects (up to $5M) to reduce cost, increase capacity, improve safety, and sustain operations
• Provide Project Leadership to 10-20 projects at a time that are in various phases of the project work process and various/multiple locations in the appropriate Region
• Promote team culture that is focused on meeting commitments while maintaining a safety excellence
• Empower project team members to understand and accept their accountabilities by ensuring project delivery expectations are clearly defined to meet the project objectives.
• Provide leadership to remove project obstacles by working with, and through, others.
• Facilitate interface between design-build partners and internal GP partners (mill/business)
• Provide oversight for project status (cost, schedule, risk), GP procedure equipment and services, and project change management
• Ensure coordination with facilities for integrating project startup (Day 1 Readiness)
• Drive a continuous improvement mindset using lean construction principles
• Manage portfolio of project metrics and benchmarks to attain targets/improvement
Who You Are (Basic Qualifications)
• 3 or more years of experience working within a manufacturing or military environment
• 3 or more years of experience of project and/or construction management of industrial / manufacturing construction projects
• Experience with project and construction management systems and concepts
• Able to travel regionally at least 50%-75% of the time (Project Dependent Fluctuates)
What Will Put You Ahead
• Bachelor's Degree or higher in Enginee...
....Read more...
Type: Permanent Location: Atlanta, US-GA
Salary / Rate: Not Specified
Posted: 2024-04-16 08:14:39
-
Your Job
Georgia-Pacific's Project & Engineering Group is seeking a remote based Project Manager to join our Regional Projects Teams.
The Regional Project teams focus is on development and delivery of projects typically ranging from $500k - $10 million.
This position is expected to manage projects within the South or East region of the United States.
This position is a remote position however frequent travel will be required therefore preferred candidates should reside within close proximity to an airport and/or driving distance to sites supported.
Major Southern and Eastern Sites are in the following locations:
- Muskogee, OK
- Monticello, MS
- New Augusta, MS
- Naheola, AL
- Perdue Hill, AL
- Memphis, TN
- Brunswick, GA
- Cedar Springs, GA
- Savannah, GA
- Palatka, FL
Other locations considered for our Dixie Plant support:
- Fort Smith, AR
- Jackson, MS
- Bowling Green, KY
- Lexington, KY
- Darlington, SC
Our Team
The Project & Engineering team works across the United States working with our facilities on project development and execution.
We are project professionals focused on a quality delivery of prioritized projects.
We partner with our mills/plants/businesses as "one team, one vision, one result".
What You Will Do
• Interface with Project Management Organization (PMO), Businesses and Plant Leadership to develop and deliver small projects (up to $5M) to reduce cost, increase capacity, improve safety, and sustain operations
• Provide Project Leadership to 10-20 projects at a time that are in various phases of the project work process and various/multiple locations in the appropriate Region
• Promote team culture that is focused on meeting commitments while maintaining a safety excellence
• Empower project team members to understand and accept their accountabilities by ensuring project delivery expectations are clearly defined to meet the project objectives.
• Provide leadership to remove project obstacles by working with, and through, others.
• Facilitate interface between design-build partners and internal GP partners (mill/business)
• Provide oversight for project status (cost, schedule, risk), GP procedure equipment and services, and project change management
• Ensure coordination with facilities for integrating project startup (Day 1 Readiness)
• Drive a continuous improvement mindset using lean construction principles
• Manage portfolio of project metrics and benchmarks to attain targets/improvement
Who You Are (Basic Qualifications)
• 3 or more years of experience working within a manufacturing or military environment
• 3 or more years of experience of project and/or construction management of industrial / manufacturing construction projects
• Experience with project and construction management systems and concepts
• Able to travel regionally at least 50%-75% of the time (Project Dependent Fluctuates)
What Will Put You Ahead
• Bachelor's Degree or higher in Enginee...
....Read more...
Type: Permanent Location: Monticello, US-MS
Salary / Rate: Not Specified
Posted: 2024-04-16 08:14:39
-
Your Job
Georgia-Pacific's Project & Engineering Group is seeking a remote based Project Manager to join our Regional Projects Teams.
The Regional Project teams focus is on development and delivery of projects typically ranging from $500k - $10 million.
This position is expected to manage projects within the South or East region of the United States.
This position is a remote position however frequent travel will be required therefore preferred candidates should reside within close proximity to an airport and/or driving distance to sites supported.
Major Southern and Eastern Sites are in the following locations:
- Muskogee, OK
- Monticello, MS
- New Augusta, MS
- Naheola, AL
- Perdue Hill, AL
- Memphis, TN
- Brunswick, GA
- Cedar Springs, GA
- Savannah, GA
- Palatka, FL
Other locations considered for our Dixie Plant support:
- Fort Smith, AR
- Jackson, MS
- Bowling Green, KY
- Lexington, KY
- Darlington, SC
Our Team
The Project & Engineering team works across the United States working with our facilities on project development and execution.
We are project professionals focused on a quality delivery of prioritized projects.
We partner with our mills/plants/businesses as "one team, one vision, one result".
What You Will Do
• Interface with Project Management Organization (PMO), Businesses and Plant Leadership to develop and deliver small projects (up to $5M) to reduce cost, increase capacity, improve safety, and sustain operations
• Provide Project Leadership to 10-20 projects at a time that are in various phases of the project work process and various/multiple locations in the appropriate Region
• Promote team culture that is focused on meeting commitments while maintaining a safety excellence
• Empower project team members to understand and accept their accountabilities by ensuring project delivery expectations are clearly defined to meet the project objectives.
• Provide leadership to remove project obstacles by working with, and through, others.
• Facilitate interface between design-build partners and internal GP partners (mill/business)
• Provide oversight for project status (cost, schedule, risk), GP procedure equipment and services, and project change management
• Ensure coordination with facilities for integrating project startup (Day 1 Readiness)
• Drive a continuous improvement mindset using lean construction principles
• Manage portfolio of project metrics and benchmarks to attain targets/improvement
Who You Are (Basic Qualifications)
• 3 or more years of experience working within a manufacturing or military environment
• 3 or more years of experience of project and/or construction management of industrial / manufacturing construction projects
• Experience with project and construction management systems and concepts
• Able to travel regionally at least 50%-75% of the time (Project Dependent Fluctuates)
What Will Put You Ahead
• Bachelor's Degree or higher in Enginee...
....Read more...
Type: Permanent Location: Palatka, US-FL
Salary / Rate: Not Specified
Posted: 2024-04-16 08:14:38
-
Your Job
Georgia-Pacific's Project & Engineering Group is seeking a remote based Project Manager to join our Regional Projects Teams.
The Regional Project teams focus is on development and delivery of projects typically ranging from $500k - $10 million.
This position is expected to manage projects within the South or East region of the United States.
This position is a remote position however frequent travel will be required therefore preferred candidates should reside within close proximity to an airport and/or driving distance to sites supported.
Major Southern and Eastern Sites are in the following locations:
- Muskogee, OK
- Monticello, MS
- New Augusta, MS
- Naheola, AL
- Perdue Hill, AL
- Memphis, TN
- Brunswick, GA
- Cedar Springs, GA
- Savannah, GA
- Palatka, FL
Other locations considered for our Dixie Plant support:
- Fort Smith, AR
- Jackson, MS
- Bowling Green, KY
- Lexington, KY
- Darlington, SC
Our Team
The Project & Engineering team works across the United States working with our facilities on project development and execution.
We are project professionals focused on a quality delivery of prioritized projects.
We partner with our mills/plants/businesses as "one team, one vision, one result".
What You Will Do
• Interface with Project Management Organization (PMO), Businesses and Plant Leadership to develop and deliver small projects (up to $5M) to reduce cost, increase capacity, improve safety, and sustain operations
• Provide Project Leadership to 10-20 projects at a time that are in various phases of the project work process and various/multiple locations in the appropriate Region
• Promote team culture that is focused on meeting commitments while maintaining a safety excellence
• Empower project team members to understand and accept their accountabilities by ensuring project delivery expectations are clearly defined to meet the project objectives.
• Provide leadership to remove project obstacles by working with, and through, others.
• Facilitate interface between design-build partners and internal GP partners (mill/business)
• Provide oversight for project status (cost, schedule, risk), GP procedure equipment and services, and project change management
• Ensure coordination with facilities for integrating project startup (Day 1 Readiness)
• Drive a continuous improvement mindset using lean construction principles
• Manage portfolio of project metrics and benchmarks to attain targets/improvement
Who You Are (Basic Qualifications)
• 3 or more years of experience working within a manufacturing or military environment
• 3 or more years of experience of project and/or construction management of industrial / manufacturing construction projects
• Experience with project and construction management systems and concepts
• Able to travel regionally at least 50%-75% of the time (Project Dependent Fluctuates)
What Will Put You Ahead
• Bachelor's Degree or higher in Enginee...
....Read more...
Type: Permanent Location: Brunswick, US-GA
Salary / Rate: Not Specified
Posted: 2024-04-16 08:14:38
-
Your Job
Georgia-Pacific's Project & Engineering Group is seeking a remote based Project Manager to join our Regional Projects Teams.
The Regional Project teams focus is on development and delivery of projects typically ranging from $500k - $10 million.
This position is expected to manage projects within the South or East region of the United States.
This position is a remote position however frequent travel will be required therefore preferred candidates should reside within close proximity to an airport and/or driving distance to sites supported.
Major Southern and Eastern Sites are in the following locations:
- Muskogee, OK
- Monticello, MS
- New Augusta, MS
- Naheola, AL
- Perdue Hill, AL
- Memphis, TN
- Brunswick, GA
- Cedar Springs, GA
- Savannah, GA
- Palatka, FL
Other locations considered for our Dixie Plant support:
- Fort Smith, AR
- Jackson, MS
- Bowling Green, KY
- Lexington, KY
- Darlington, SC
Our Team
The Project & Engineering team works across the United States working with our facilities on project development and execution.
We are project professionals focused on a quality delivery of prioritized projects.
We partner with our mills/plants/businesses as "one team, one vision, one result".
What You Will Do
• Interface with Project Management Organization (PMO), Businesses and Plant Leadership to develop and deliver small projects (up to $5M) to reduce cost, increase capacity, improve safety, and sustain operations
• Provide Project Leadership to 10-20 projects at a time that are in various phases of the project work process and various/multiple locations in the appropriate Region
• Promote team culture that is focused on meeting commitments while maintaining a safety excellence
• Empower project team members to understand and accept their accountabilities by ensuring project delivery expectations are clearly defined to meet the project objectives.
• Provide leadership to remove project obstacles by working with, and through, others.
• Facilitate interface between design-build partners and internal GP partners (mill/business)
• Provide oversight for project status (cost, schedule, risk), GP procedure equipment and services, and project change management
• Ensure coordination with facilities for integrating project startup (Day 1 Readiness)
• Drive a continuous improvement mindset using lean construction principles
• Manage portfolio of project metrics and benchmarks to attain targets/improvement
Who You Are (Basic Qualifications)
• 3 or more years of experience working within a manufacturing or military environment
• 3 or more years of experience of project and/or construction management of industrial / manufacturing construction projects
• Experience with project and construction management systems and concepts
• Able to travel regionally at least 50%-75% of the time (Project Dependent Fluctuates)
What Will Put You Ahead
• Bachelor's Degree or higher in Enginee...
....Read more...
Type: Permanent Location: New Augusta, US-MS
Salary / Rate: Not Specified
Posted: 2024-04-16 08:14:37
-
Your Job
Georgia-Pacific's Project & Engineering Group is seeking a remote based Project Manager to join our Regional Projects Teams.
The Regional Project teams focus is on development and delivery of projects typically ranging from $500k - $10 million.
This position is expected to manage projects within the South or East region of the United States.
This position is a remote position however frequent travel will be required therefore preferred candidates should reside within close proximity to an airport and/or driving distance to sites supported.
Major Southern and Eastern Sites are in the following locations:
- Muskogee, OK
- Monticello, MS
- New Augusta, MS
- Naheola, AL
- Perdue Hill, AL
- Memphis, TN
- Brunswick, GA
- Cedar Springs, GA
- Savannah, GA
- Palatka, FL
Other locations considered for our Dixie Plant support:
- Fort Smith, AR
- Jackson, MS
- Bowling Green, KY
- Lexington, KY
- Darlington, SC
Our Team
The Project & Engineering team works across the United States working with our facilities on project development and execution.
We are project professionals focused on a quality delivery of prioritized projects.
We partner with our mills/plants/businesses as "one team, one vision, one result".
What You Will Do
• Interface with Project Management Organization (PMO), Businesses and Plant Leadership to develop and deliver small projects (up to $5M) to reduce cost, increase capacity, improve safety, and sustain operations
• Provide Project Leadership to 10-20 projects at a time that are in various phases of the project work process and various/multiple locations in the appropriate Region
• Promote team culture that is focused on meeting commitments while maintaining a safety excellence
• Empower project team members to understand and accept their accountabilities by ensuring project delivery expectations are clearly defined to meet the project objectives.
• Provide leadership to remove project obstacles by working with, and through, others.
• Facilitate interface between design-build partners and internal GP partners (mill/business)
• Provide oversight for project status (cost, schedule, risk), GP procedure equipment and services, and project change management
• Ensure coordination with facilities for integrating project startup (Day 1 Readiness)
• Drive a continuous improvement mindset using lean construction principles
• Manage portfolio of project metrics and benchmarks to attain targets/improvement
Who You Are (Basic Qualifications)
• 3 or more years of experience working within a manufacturing or military environment
• 3 or more years of experience of project and/or construction management of industrial / manufacturing construction projects
• Experience with project and construction management systems and concepts
• Able to travel regionally at least 50%-75% of the time (Project Dependent Fluctuates)
What Will Put You Ahead
• Bachelor's Degree or higher in Enginee...
....Read more...
Type: Permanent Location: Cedar Springs, US-GA
Salary / Rate: Not Specified
Posted: 2024-04-16 08:14:37
-
Your Job
This position will be a part of a dynamic work team and report to the Automation & Robotics Center of Excellence team.
The position will also work with a section serving all geographic regions nationwide.
We are expecting the roles to reside in the Jacksonville, Florida area.
This is a non-exempt salaried position.
Our Team
We are seeking qualified applicants for the role of Automation Platform Technician supporting the operation of an Automated Guided Vehicle (AGV) system in the Jacksonville, Florida, distribution center.
What You Will Do
* Complete regularly scheduled Preventive Maintenance (PM's) on time and per AGV Platform requirements.
* Provide corrective maintenance - including Root Cause Analysis.
* Effectively provide feedback/training to Operator Technicians as needed.
* Use tools and data to predict when maintenance is performed.
* Ensure Asset Strategies are being executed and provide feedback to AGV Platform when changes are needed.
* Track issues/repairs and utilize escalation process via SAP or similar tools.
* Work collaboratively with other internal resources to engage additional platform team members as needed.
* Strong computer skills.
* Ability to work independently and reach out for resources as needed.
* Strong oral and written communication skills.
* Willingness to learn specific skills required to maintain and operate AGV's and supporting automation equipment.
Who You Are (Basic Qualifications)
* Experience applying Basic PLC knowledge & troubleshooting.
* Experience applying basic electrical and mechanical principles, motors, drivers, belts, and bearings.
* Experience in operations and equipment maintenance or manufacturing engineering.
* Experience communicating with various audiences as this role will require communication to all levels of the organization (i.e., via reports, e-mail, verbally, and/or in small/large group settings) in a team environment.
* Experience applying Root Cause Analysis techniques.
What Will Put You Ahead
* Experience with maintenance and/or operation of Automated Guided Vehicles
* Experience in an environment that requires self-direction, multi-tasking, and independent decisions making
* Experience with electrical safe work practices
This position does not qualify for VISA Sponsorship.
At Koch companies, we are entrepreneurs.
This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions.
Any compensation range provided for a role is an estimate determined by available market data.
The actual amount may be higher or lower than the range provided considering each candidate's knowledge, skills, abilities, and geographic location.
If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.
Hiring Philosophy
All Koch companies value diversity of thought, perspectives, aptitudes, experiences, and backgrounds.
We are Military Ready and Second Chance empl...
....Read more...
Type: Permanent Location: Atlanta, US-GA
Salary / Rate: Not Specified
Posted: 2024-04-16 08:14:32
-
INVISTA is seeking an Occupational Health Technician at our Victoria, TX plant to join our industry-leading team.
Our Team
At INVISTA we believe that our Culture is our competitive advantage and are looking for individuals who are passionate about advancing it to the next level.
The Occupational Health Technician will be responsible for conducting a variety of health assessments and tests on employees in a workplace setting.
Administrative and clinical work will be required in this role.
The Occupational Health Technician will work closely with the Occupational Health Leader and medical director to ensure employees are healthy and safe while on the job.
What You Will Do
* Administer respirator fit testing, audiometric testing, pulmonary function testing, and drug testing.
* Coordinate with site leaders and employees to schedule surveillance exams with the assistance of the Occupational Health Leader.
* Provide first aid and assist the Occupational Health Leader with care initiatives for occupational health injuries/illnesses by utilizing the established medical directives and protocols.
* Maintain medical supply inventory, calibration/maintenance of medical equipment, and general office supply inventory in addition to other administrative duties.
* Demonstrate independent and effective decision-making skills while assisting in high-stress circumstances.
* Communicate and interact effectively with all levels of the organization using strong interpersonal skills.
Who You Are (Basic Qualifications)
* CPR certification required (ACLS certification preferred)
* Required to wear Personal Protective Equipment (PPE) consistent with occupational health/medical personnel
* Experience performing venipunctures
What Will Put You Ahead
* Previous Occupational Health experience or healthcare experience in fast-paced team environment (clinic/hospital setting)
* CMA or LVN
* Certified in audiometry (CAOHC)
* Certification in other Occupational Health related services (NIOSH-approved spirometry)
* Working knowledge of OSHA, Workers' Compensation, and ADA
At Koch companies, we are entrepreneurs.
This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions.
Any compensation range provided for a role is an estimate determined by available market data.
The actual amount may be higher or lower than the range provided considering each candidate's knowledge, skills, abilities, and geographic location.
If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.
Hiring Philosophy
All Koch companies value diversity of thought, perspectives, aptitudes, experiences, and backgrounds.
We are Military Ready and Second Chance employers.
Learn more about our hiring philosophy here .
Who We Are
As a Koch company, INVISTA has a long history of working to make the world around...
....Read more...
Type: Permanent Location: Victoria, US-TX
Salary / Rate: Not Specified
Posted: 2024-04-16 08:14:32
-
Your Job
In this role, you will have the opportunity to lead material selection/development on elastomer/thermoplastic category materials for components in automotive connection systems, on new product development products as well as modifications for legacy products.
Our Team
We are building our in-house engineering team and are looking for a talented individual to join.
If you are looking for a way to accelerate your career and be part of a great company, this may be the opportunity for you.
What You Will Do
Knowledge and Skills
* Provide fundamental knowledge and understanding of elastomeric & thermoplastic material behavior to enable successful development and qualification of seal & thermoplastic components in automotive connection systems.
* Supplement above with product requirements & manufacturing knowledge of seal thermoplastic components in automotive connection systems & drive material selection based on performance to cost by working with cross functional team.
* Ensure possessed working knowledge is synced with latest development in the elastomer/rubber & Thermoplastics in automotive connector field.
Product / Process Development
* Develop Material characterization packages to fully characterize Elastomeric & Thermoplastic material behavior for preferred materials by working with cross functional team to support material selection & digital twin development.
* Develop & maintain material specifications that translate product requirements to material requirements.
* Develop test plans & drive process for validation of material performance and analyze test results using statistical methods.
* Enhance material databases, to meet expectations of Product Engineers for material selection.
* Lead root cause analysis utilizing structured problem-solving methods (8D, 5 Why, Fishbone).
Execution & Communication
* Engage with external suppliers & cross functional teams within Molex to successfully develop new seal & thermoplastic products and support existing products.
* Develop documentation of the project scope, requirements, feasibility, & engineering workplan.
Works directly with product engineering to capture needs and translates into an executable project.
* Clearly and concisely communicate technical knowledge and experimental findings in written and verbal formats to peers, management, and customers concisely and clearly.
* Manage multiple projects simultaneously.
Create / maintain engineering timelines, escalate barriers, and drive projects to completion.
Who You Are (Basic Qualifications)
* Bachelor's degree in mechanical/aerospace engineering or Material Science
* 5+ years' experience with material formulation with rubber/elastomer & thermoplastic materials
* 3+ years' experience with manufacturing processes on rubber/elastomer & thermoplastic material components.
* 3+ years of technical leadership experience to drive material selection & mater...
....Read more...
Type: Permanent Location: Rochester Hills, US-MI
Salary / Rate: Not Specified
Posted: 2024-04-16 08:14:30
-
Your Job
As Maintenance Engineer you'll be responsible, execute schedule preventive and corrective maintenance MTTR, MTBF plans, as well as analyze data among other activities.
Our Team
This position interacts on a regular basis with both internal and external individuals at many levels of the organization - peers, professional and direct labor levels - at Molex and suppliers.
(Manufacturing Services, Quality, Other Production Plant Personnel, Suppliers, Procurement, Finance)
What You Will Do:
* Collaborate with different groups within the production area and throughout Molex to support all manufacturing operations and achieve plant metrics/goals with the best cost-effective approach.
* Lead the Maintenance Budget Preparation, based on CMMS/SAP
* weekly Report.
Establish and track Activities on PMS, Corrective Maintenance, MTTR and MTBF.
* Develop scheduled preventive maintenance for the plant equipment.
* Manage Human resources and assets of the area.
* Use SAP to plan and schedule maintenance routines to keep the production process running.
* Responsible for reviewing prioritized work orders and evaluating them for planning and/or scheduling process application.
* Understand, support, and contribute to Molex International Standards Organization (ISO) and Environmental, and/or Health and Safety (EH&S) Management Systems by following stated policies and procedures.
Who You Are (Basic Qualifications):
* Bachelor's degree Mechatronics, Mechanical Engineer
* Expertise in Maintenance.
* Good experience in similar position.
* Experience in SAP
* Experience with 5 why's and Ishikawa (Fishbone diagram)
* English fluent
* knowledge statistical and engineering methods to implement preventive and corrective actions.
* knowledge of maintenance methods
* Ability to read and interpret electrical and mechanical drawings.
* Proficient computer skills.
Experience with spreadsheet, presentation, and word processing software
What Will Put You Ahead:
* Project management skills that demonstrate the ability to set goals and priorities to complete projects in a systematic and timely manner.
* Strong verbal and written communication skills that demonstrate the ability to express complex technical concepts clearly and concisely.
* Effective interpersonal skills at all levels of the organization.
#LI-MB2
....Read more...
Type: Permanent Location: El Salto, MX-JAL
Salary / Rate: Not Specified
Posted: 2024-04-16 08:14:29
-
Alternant(e) Ingénieur Industrialisation 4.0 F/H
Job Description
A propos du poste
Prêt(e) à relever un nouveau défi en rejoignant une équipe à taille humaine dans une entreprise mondialement reconnue ?
Alors, ce poste d’Ingénieur(e) en Industrialisation 4.0 en contrat d’apprentissage au sein de notre usine KimberlyClark de Rouen (76) est fait pour vous !
Votre mission : Participer à la transformation digitale de l’entreprise en assurant le déploiement de nouveau outils de suivi de production et en assurant toutes les missions associées ! Participer au fonctionnement des machines qui fabriquent des produits de premier ordre pour 1/4 de la population mondiale est un travail difficile mais enthousiasmant.
Accompagné par votre manager et soutenu par votre équipe vous contribuez à fabriquer des produits utilisés par vos amis votre propre famille quotidien.
Ce challenge vous intéresse ? Alors, venez nous rejoindre et développer vos compétences !
Missions principales :
Dans le respect des règles HSE et Qualité et de nos procédures visant à garantir notamment la sécurité des personnes et des activités ainsi que la conformité de nos produits, vous participerez aux missions suivantes :
• Déployer le logiciel MES (suivi de la production) et acquérir les data associées
• Valider, tester les configurations, et la remontée des datas sur MES
• Former, accompagner et faciliter l’adhésion et le changement dans les ateliers
• Mettre en place des solutions de mobilité (Scanners, tablettes)
• Valider la pertinence des indicateurs de production et faciliter l’utilisation et la communication par des tableaux de Visual management numériques
• Participer au sein de l’équipe projet au développement de la stratégie de transformation digitale de l’usine
• Identifier, diagnostiquer les dysfonctionnements, incidents, non-conformités et mettre en œuvre les mesures correctives
Vous pourrez également être amené(e) à participer à bien d’autres actions en fonction des besoins et de l’actualité du site
A propos de vous
Autonome, dynamique, motivé(e) et curieux(se), vous avez une première expérience professionnelle dans un site industriel.
Vous êtes reconnus pour votre capacité d’analyse, votre bon relationnel et votre force de proposition.
Une maîtrise de la langue anglaise serait un plus.
Vous êtes en première année d’un cycle d’Ingénieur ou Mastère spécialisé en Industrialisation 4.0 / Informatique Industrielle.
Rémunération : % du SMC ou SMIC suivant l’âge, primes attractives, intéressement & participation, mutuelle gratuite, restaurant d’entreprise, avantages du CSE.
A propos de nous
Kimberly-Clark et ses marques célèbres font partie de la vie des personnes présentes dans plus de 150 pays.
Tous les jours, 1,3 milliards de personnes - presque un quart de la population mondiale - font confiance à nos marques et aux solutions que nous proposons, pour...
....Read more...
Type: Permanent Location: Sotteville, FR-NOR
Salary / Rate: Not Specified
Posted: 2024-04-16 08:14:26
-
Bezpečnostní technik
Job Description
Vaše práce
Zajišťování zavádění, seldování a zaznamenávání bezpečnostních pravidel ve firmě, která vyrábí špičkové produkty pro ¼ populace, je těžká práce, ale stojí to za to, když vás váš vedoucí pochválí, podporuje váš tým a vidíte, jak produkty, které vyrábíte, používají vaši vlastní přátelé a rodina.
Na této pozici Vás bude mimo jiné čekat:
* Ručit za to, že stav strojů, zařízení a vybavení budov odpovídá bezpečnostním nařízením
* Spolupracovat s techniky závodu
* Spolupracovat s EHS koordinátorem
* Zastupovat firmu v záležitostech týkajících se BOZP a PO
O nás
Huggies®.
Kleenex®.
Bavlna®.
Scott®.
Kotex®.
Poise®.
Depend®.
Naše legendární značky již znáte – stejně jako zbytek světa.
Ve skutečnosti 25 % lidí na světě používá produkty Kimberly-Clark každý den.
Víme, že tyto úžasné produkty Kimberly-Clark by neexistovaly bez našich kolegů ve výrobě, jako jste vy.
Jsme také tým, který se jeden o druhého skutečně zajímá – něco jako rodina, ale opravdu produktivní a soustředěný.
Průzkum zaměstnanců ukazuje, že každý zaměstnanec ve výrobě přichází každý den do práce s pocitem bezpečí, protože ví, že jeho bezpečnost nebude nikdy ohrožena.
Jsme hrdí na naši schopnost nabídnout výbornou mzdu za dobře vykonanou práci, a příležitosti pro členy našeho týmu, aby se postupem času mohli rozvíjet.
Existuje více než jeden způsob, jak vytvořit svou budoucnost s naším vítězným týmem.
To vše je tady pro vás v Kimberly-Clark; stačí se jen přihlásit!
O vás
Rádi bychom našli kolegu či kolegyni, který/á má vysoké pracovní nasazení se SŠ vzděláním a schopností samostatně řešit problémy.
Budete používat anglický jazyk, proto jeho znalost na úrovni alespoň B1 je nutná.
Komunikativnost a flexibilita by vám měla být vlastní.
Výhodou budou znalosti v oblasti BOZP a PO.
Nabízíme
Naši výrobní zaměstnanci jsou jedni z našich nejdůležitějších pracovníků a naši nejvěrnější fanoušci, takže se o ně staráme opravdu dobře.
Uvádíme jen několik z mnoha benefitů, které by se vám mohly líbit.
Pro Kimberly-Clark jsou její zaměstnanci nejvyšší prioritou, a proto nabízíme mzdu 36.610 Kč.
K této mzdě můžete obdržet navíc motivující bonus.
Jsme rádi, když se naši kolegové rozvíjí, a proto máme vytvořen systém, abyste mohli rozvíjet své profesní dovednosti.
Vyrovnaný pracovně-osobní život je důležitý pro spokojenost každého z nás, a tak poskytujeme týden dovolené nad rámec stanovený zákonem, k tomu den placeného volna v měsíci narozenin, a další možnosti.
Abyste se u nás cítili dobře, vytváříme vám prostředí k vaší spokojenosti.
Máme pro vás kantýnu, parkování u firmy, sick days, přispíváme na životní pojišt...
....Read more...
Type: Permanent Location: Litovel, CZ-51
Salary / Rate: Not Specified
Posted: 2024-04-16 08:14:23
-
Lead Engineer
Job Description
As a person, you’re a learner – a natural leader – someone who is always taking initiative to make things better and bring others along with you.
You live your life in alignment with the highest values of integrity and quality, always ensuring your responsibilities become a long-term success story.
In this role, you’ll help us deliver better care for billions of people around the world.
It starts with YOU.
Process Engineers at Kimberly-Clark initiate design, develop, optimize, and problem solve manufacturing and converting processes in a manner that meets safety, quality, and operational performance expectations.
We are seeking a driven Process Engineer to support the Wet Wipes Converting assets in Beech Island, SC. This role will provide leadership and creativity in the design, development, optimization, problem solving and operation of equipment and processes in a manner that meets safety and operational performance expectations. The individual will report to the Wet Wipes Engineering Manager.
Responsibilities:
* Carry out all job responsibilities in a safe manner.
Develop equipment and processes that meet safety codes, policies, and guidelines. Provide for the safety and well-being of operators, maintenance, and other personnel.
* Support capital projects and trials that improve Safety, Quality, Capacity or Cost of Manufacturing.
* Provide functional guidance in the design, development, and optimization of production equipment to meet unit objectives and satisfy sanitary manufacturing standards.
* Seek, recognize, define, and solve problems to achieve unit objectives.
* Develop knowledge and skills in leadership of the application of engineering principles, scientific analysis, problem solving, and project management.
Qualifications:
* Position requires a bachelor’s in Chemical Engineering, Paper Science or equivalent degree from an accredited college or university.
* 3+ years of working experience
* Incumbent should have the ability and flexibility to work in a manufacturing environment with a 24/7 operation
* Incumbent should be flexible to travel up to 15% as dictated by business need for meetings, machine install or start-up support, benchmarking, or best practice sharing across KCNA
Preferred (not essential, but desired):
* Experience in a manufacturing environment
* Evidence of continuing self-development.
* Ability to network and collaborate with cross-functional teams
* Effective written and verbal communication skills
And finally, the fine print….
For Kimberly-Clark to grow and prosper, we must be an inclusive organization that applies the diverse experiences and passions of its team members to brands that make life better for people all around the world. We actively seek to build a workforce that reflects the experiences of our consumers. When you bring your original thinking to Kimberly-Clark, you fuel...
....Read more...
Type: Permanent Location: Beech Island, US-SC
Salary / Rate: Not Specified
Posted: 2024-04-16 08:14:20
-
Ingénieur automaticien
Job Description
Nous
Kimberly-Clark, multinationale leader sur les marchés de l’hygiène et de la santé, avec un chiffre d’affaires de plus de $18 milliards, emploie 42 000 personnes à travers le monde.
Chaque jour, près d’un tiers de la population dans le monde utilise ses produits aux marques reconnues telles que KLEENEX®, SCOTT®, WYPALL®, KLEENGUARD®.
Votre Role
L’ingénieur Automaticien a pour missions de fournir une expertise technique et un soutien dans la mise en œuvre et l'optimisation de la plateforme de systèmes SMOM (Smart Manufacturing Operation Management) et des processus associés pour soutenir les objectifs du secteur.
Vous avez la responsabilité de diriger et fournir l'analyse, la conception, la configuration, la personnalisation, la mise à l'essai, le déploiement et le soutien des applications et de la technologie dans un domaine de processus opérationnel précis, comme effectuer des travaux de pointe et élaborer des approches et des solutions novatrices.
Le role reporte au Responsable de la Transformation Numérique France et ne manage pas une équipe (contributeur individuel).
Location: Le poste sera basé à l’usine de Villey-Saint-Etienne.
Principales Responsabilités et missions:
* Recevoir les directives de travail du Responsable de la Transformation Numérique et rendre compte à l'ensemble de l'organisation de l'usine.
* Fournir une expertise technique et opérationnelle pour trouver des solutions rapides et opportunes aux problèmes liés à la SMOM (Smart Manufacturing Operation Management) dans tous les secteurs de l’usine.
* Fournir une assistance quotidienne pour les demandes SMOM et résoudre les problèmes ayant un impact sur la fonctionnalité ou l'intégrité du système.
* Développer et gérer les flux de données dans SMOM (entrées manuelles, entrées PLC, etc.) pour générer des informations à partir de SMOM (rapports, tableaux de bord, etc.) afin d'améliorer la visibilité et d'accélérer la prise de décision pour les équipes d'actifs, les ingénieurs et la direction du site.
* Acquérir et maintenir des connaissances SMOM en obtenant une formation appropriée et en interagissant avec les réseaux internes de l'entreprise.
* Contribuer, en tant que membre de l'équipe technique, à diverses initiatives, projets et activités qui ne sont pas inclus dans les responsabilités principales afin d'aider à l'atteinte des objectifs globaux.
* Renforcer les capacités organisationnelles dans le domaine de la transformation numérique grâce à la formation et à l'assistance des utilisateurs clés.
* Travailler dans un environnement de fabrication avec une compréhension des indicateurs clés de performance, de l'efficacité opérationnelle (OEE)
* Coordonner des projets spécifiques à l'usine en matière de MES et d'intégration aux systèmes existants et nouveaux
* Connaitre les composants de l...
....Read more...
Type: Permanent Location: Toul Cedex, FR-54
Salary / Rate: Not Specified
Posted: 2024-04-16 08:14:16
-
Your Job
Georgia-Pacific is seeking full-time Engineers to join our Engineering Development Program (EDP) in Summer 2024 at one of our many nationwide locations!
Georgia-Pacific, a Koch Industries company, is one of the world's leading manufacturers and marketers of building products, tissue, packaging, paper, cellulose, and related chemicals.
You may recognize some of our products such as Quilted Northern® and Angel Soft® tissue, Brawny® paper towels, and Dixie® plates and cups.
The company employs more than 30,000 people at approximately 300 locations in North and South America.
Georgia-Pacific creates long-term value by using resources efficiently to provide innovative products and solutions that meet the needs of customers and society, while operating in a manner that is environmentally and socially responsible and economically sound.
Our Team
We believe that everyone should be an entrepreneur no matter what role they are in.
There are countless opportunities for you to be challenged, have your voice heard, and gain real experience within our companies.
Sound exciting? Do you want to be a part of meaningful work? Kickstart your career with us by applying today! Our full-time opportunities are in-person nationwide!
What You Will Do
The Engineering Development Program (EDP) with Georgia-Pacific is designed for aspiring engineers who are seeking expedited training, professional development/mentorship, exposure to operations leadership, and career growth.
Engineers are assigned to one of our many U.S.
locations and help support innovation, process efficiency, equipment reliability, quality assurance, and more with an overarching focus on compliance, safety & health.
As part of your development experience, you'll have the opportunity to attend a centralized onboarding kick-off with other incoming engineers, be offered multiple training opportunities, and more!
The EDP seeks talent from many disciplines including (but not limited to):
* Chemical Engineering
* Electrical Engineering
* Manufacturing Engineering
* Mechanical Engineering
* Industrial Engineering
* Process Control Engineering
* Pulp & Paper Science Engineering
* Quality Engineering
Engineers generally will be placed into one of the following types of roles: Process Engineer, Project Engineer, Manufacturing Engineer, Reliability Engineer, Process Control Engineer, etc.
Specific job duties/responsibilities are dependent upon the role and location offered.
More details will be provided during the selection process.
As a global company spanning multiple industries and offering limitless opportunities for growth, we offer an opportunity to launch your career with us with a focus on the future.
Entry level professionals at Koch companies learn about our unique Principle-Based Management culture, while applying their skills working alongside experienced employees to solve real problems and offer insights that benefit society through impr...
....Read more...
Type: Permanent Location: Halsey, US-OR
Salary / Rate: Not Specified
Posted: 2024-04-16 08:14:15
-
Process Engineer III
Job Description
Primary Location
Malaysia - Johor - Kluang
Additional Locations
Worker Type
Employee
Worker Sub-Type
Regular
Time Type
Full time
Type: Permanent Location: Kluang, MY-01
Salary / Rate: Not Specified
Posted: 2024-04-16 08:14:11
-
Maintenance Mechanical Engineer
Job Description
Mechanical Supervisor III
Your Job
You’re not the person who will settle for just any role.
Neither are we.
Because we’re out to create Better Care for a Better World, and that takes a certain kind of person and teams who care about making a difference.
Here, you’ll bring your professional expertise, talent, and drive to building and managing our portfolio of iconic, ground-breaking brands.
In your Mechanical Supervisor III role, you’ll help us deliver better care for billions of people around the world.
It starts with YOU.
General Expectations & Responsibilities:
* To proactively promote, participate and provide supports in the development and maintenance of the Mill Environment, Health, and Safety Management System (EHSMS) in a manner that will help to eliminate occupational injuries and illness at the mill.
This will include but not limited to;
* Comply with K-C and regulatory requirements related to EHS&S
* Support the identification, reporting, escalation and control of safety and environmental hazard to ensure risks are managed to acceptable levels.
* Support/lead EHS&S events investigations to ensure root cause evaluations are conducted and effective corrective/preventative actions are implemented.
* Complete and ensure direct reports complete appropriate EHS&S orientation/training.
* Ensure adherence of contractors to relevant K-C standards and requirements
* Support EHS&S culture initiatives and programs
* To proactively promote, participate and provide supports in the development and maintenance of the Quality Management System that comply to the desired requirement and meeting the CSCU expectation through consistent implementations of the established standards.
Role Overview & Primary Accountabilities:
* To lead the mechanical maintenance team and accountable for the mechanical related maintenance support services to the operation area.
* To plan, organize and control the manpower for all maintenance work activities.
* To ensure preventive and corrective maintenance activities are perform in a timely, effective, and efficient manners.
* To support the maintenance troubleshooting, upgrading and modification of existing machines and equipment at operation area.
* To arrange and plan proper resources are available for effective maintenance work to be done.
This include attending pre and post shutdown meeting and update record after work are done.
* To attend mechanical related problem in ensuring the downtime being kept at minimum.
* To prepare daily work assignment and task for mechanical maintenance team and supervisor the maintenance team on the completion of each assignment.
* To provide technical knowledge know how and technical training on the machine and equipment repair to reduce the cost and maintenance downtime for respective machines.
*
*
* The above accountabilities are not exhau...
....Read more...
Type: Permanent Location: Kluang, MY-01
Salary / Rate: Not Specified
Posted: 2024-04-16 08:14:10
-
Position available on 12 hour night shift
The policy of The Krusteaz Company is to hire, train, and promote all persons in all job groups in accordance with law, without regard to race, color, religion, sex, sexual orientation, age, marital or military status, national origin, gender identity, the presence of any sensory, mental or physical disability, genetic information, or any other status or characteristic protected by local, state, or federal law.
Get to know us:
* A people-focused company that cares: We’re a 90-year-old company with the entrepreneurial spirit of a startup and a focused eye on the future.
As a midsized, privately-held company with a portfolio of beloved food and beverage brands, our people are the most important ingredient in our success.
* A valued and supported workforce: We place tremendous value in our employees and provide competitive pay and comprehensive benefits to ensure our employees can create the best life for themselves.
Benefits include a top tier health insurance plan with lower than average employee cost share, generous PTO, 401(k) match, and more.
* An engaged and energized culture: At The Krusteaz Company, collaboration and ingenuity drive our fierce commitment to creating extraordinary product experiences that people love.
* A place to grow and make a difference: An entrepreneurial spirit has been at the core of our company since the beginning, attracting self-starters who are curious and love to learn and to share ideas.
Benefits: We are proud to offer generous benefits including comprehensive medical, dental and vision insurance (starting at $45/month for employee only coverage), 401(K) matching, 3 weeks of paid vacation, 10 paid holidays, company provided life insurance and disability insurance, flexible spending account and tuition reimbursement.
Salary Information:
* An employee in this position can expect a salary range between $66,257 and $96,414.
We typically pay out between $66,584 and $84,601.
The actual salary offered will carefully consider a wide range of factors, including internal equity, experience, education, certification, training, and location.
All positions are eligible for additional incentives based on business performance.
About the Position
The QA Specialist position provides leadership and technical QA support to the manufacturing facility in the areas of qualify and food safety.
This will involve coordinating activities, providing resource support for diverse teams with complementary objectives, identifying key opportunities, providing technical training, and leading initiatives to improve food safety, quality and regulatory compliance.
Essential Functions
Other duties, responsibilities, and activities may change or be assigned at any time.
* Proficient technical resource for product quality and food safety, coordinator of new products, changes, plant trials and materials.
* Coordinates customer expectations fro...
....Read more...
Type: Permanent Location: Kent, US-WA
Salary / Rate: Not Specified
Posted: 2024-04-16 08:12:59
-
If you are a Production Supervisor Professional looking for an opportunity to grow, Emerson has an exciting position for you! Rosemount™ Measurement & Analytical, a business unit of Emerson Automation Solutions, is currently seeking a Production Supervisor on 2nd Shift (3:00 p.m.
- 1:30 a.m.
M-Th).
Based in our Eden Prairie, MN location, you will gain skill in the supervision of assigned manufacturing work areas in a manner which will achieve group objectives with regard to safety, quality, continuous improvement, schedule, cost, training, and a positive working environment.
Rosemount™ is a signature brand of Emerson, offering a comprehensive line of measurement instrumentation, analyzers and systems that are used in a wide range of applications found in critical processing facilities such as refineries, chemical plants, power plants, pipelines, and more.
IN THIS ROLE, YOUR RESPONSIBILITIES WILL BE:
* Create and maintain a safe work environment.
Be responsible for maintenance and protection of company property in assigned work area.
* Plan daily work assignments and periodic rotations for assigned employees to meet objectives.
Delegate routine and important tasks.
* Share responsibility and accountability for schedule, quality of product and safety with direct reports.
Set clear objectives and measures and monitor progress and results.
* Participate in the hiring and selection process to fill open positions.
Interview and recommend potential candidates.
* Maintain and support ongoing training programs.
Participate in the development of new or updated training programs as necessary.
Provide tasks and assignments that challenge and stretch employees’ abilities.
Conduct regular discussions with employees on personal development.
* Conduct timely, effective performance reviews in accordance with company guidelines.
Regularly meet one-on-one with assigned employees to verbally review performance.
Provide current, direct, complete, and actionable feedback that is both constructive and positive.
* Communicate regularly to assigned employees on matters such as business conditions, goals, trends, accomplishments, pay plan updates, and information on benefits and policies.
Foster open dialogue within work unit and across work units.
* Demonstrate knowledge of, and consistently and fairly administers and support company policies, procedures and guidelines.
* Demonstrate proficient knowledge of manufacturing practices and processes.
* Attend and actively participate in training for new supervisors as outlined by Rosemount Training & Development and departmental supervision.
WHO YOU ARE:
You provide appropriate guidance and direction based on people’s capabilities.
You credit others for their contributions and accomplishments.
You deliver clear, problem-focused communication.
You relate comfortably with people across levels, functions, cultures, ...
....Read more...
Type: Permanent Location: Eden Prairie, US-MN
Salary / Rate: Not Specified
Posted: 2024-04-16 08:12:09
-
Your Job
Oversee all the hydrologic engineering activities and deliverables during varying stages of design and construction on multiple sites across the country simultaneously.
Our Team
DEPCOM POWER, INC is a leader in the Engineering, Procurement, Construction (EPC), Operation and Maintenance (O&M), Repowering and Energy Storage services for the U.S.
utility solar and energy industries.
Our rapid growth, reputation and strong position in the energy market offer dynamic career opportunities for individuals seeking an exciting work environment in America's fastest growing sector.
What You Will Do
* Oversee all the hydrologic engineering activities and deliverables during varying stages of design and construction on multiple sites across the country simultaneously.
* Participate in the post processing of the DTM together with the GIS team.
* Perform the required hydrologic analysis using HEC -RAS.
* Collaborate with our HSE team to ensure environmental compliance of the projects.
* Provide RFI construction support to all solar projects in parallel and managing consultants.
* Work with Procurement to generate equipment technical specifications and material requisitions to ensure equipment meets prime contracts requirements & engineering standards.
* Participate in contractual exhibit reviews.
* Coordinate post mapping deliverables with outside consultants for all projects for post installation.
* Assist with developing procedures, processes and standards related to Structural Engineering.
* Oversee engineering activities and deliverables during varying stages of design and construction on multiple sites across the country simultaneously.
* Participate in discipline cross- checks.
Who You Are (Basic Qualifications)
* Bachelor or higher degree in civil engineering or equivalent with professional registration (Cedula Profesional - SEP) in Mexico.
* Specialization in hydrology.
* 6 + years of experience designing for infrastructure projects.
* Proficiency in HEC-RAS.
* Experience in land development.
* Proficiency in civil technical drawing & design.
* Competent use of civil design software including AutoCAD, CADWorxs or similar, etc.
* Knowledge of engineering principles for analysis and design.
* Familiarized with international codes such as ASCE, AISC, ACI, etc.
* Ability to travel to US during short periods (Valid passport and visa).
* Valid driving license.
* Fluent in English oral and written communication.
What Will Put You Ahead
* Experience participating in electrical power systems or solar projects.
* HDD design review, including the use of cavity expansion model.
* Proven experience of accomplishment with minimal supervision.
* Demonstrated ability to resolve construction and engineering issues.
* PE Engineer registration (Canada or US).
At Koch companies, we are entrepreneurs.
This means we o...
....Read more...
Type: Permanent Location: Querétaro, MX-QUE
Salary / Rate: Not Specified
Posted: 2024-04-16 08:11:33
-
Your Job
We are seeking a highly skilled and detail-oriented Mechanical CAD Engineer who specializes in NX modeling and is proficient with Teamcenter.
As a key member of our engineering team, you will be responsible for creating and modifying 3D models and drawings using Siemens NX software, managing data within Teamcenter, and collaborating with cross-functional teams to support product design and development processes.
The ideal candidate will possess a strong technical background in mechanical engineering, excellent CAD skills, and a deep understanding of product lifecycle management
Our Team
Responsible for the design support to DSS (DSS Business Units) products.
Manages product modifications through the complete implementation process to develop designs that meet or exceed product performance specifications per internal Molex standards, industry standards or customer specifications to a planned schedule.
Supports engineering team on all projects in development, 3D Modeling, 2D Drawings, engineering changes, technical documents, product testing, etc.
What You Will Do
1.
Utilize Siemens NX software to develop 3D models and assemblies of mechanical components, ensuring accuracy, precision, and adherence to design specifications.
2.
Collaborate with design engineers to interpret technical drawings, sketches, and specifications, and convert them into detailed 3D models and 2D drawings.
3.
Create and maintain engineering documentation, including bills of materials (BOMs), engineering change orders (ECOs), and release packages, within Teamcenter.
4.
Manage and organize CAD files, ensuring proper version control and data integrity within Teamcenter.
Support design reviews and participate in cross-functional meetings to provide technical insights and recommendations for design improvements.
5.
Perform tolerance analysis and verification of parts and assemblies to ensure fit, form, and function.
6.
Conduct design feasibility studies, identifying potential issues or constraints and proposing solutions to optimize product design.
7.
Collaborate closely with manufacturing and production teams to address design-related issues, resolve manufacturing discrepancies, and support the development of efficient manufacturing processes.
8.
Stay updated with industry trends, advancements, and best practices related to CAD modeling, NX software, and Teamcenter usage, and apply them to enhance design efficiency and quality.
9.
Perform other related duties as assigned by management.
Who You Are (Basic Qualifications)
Bachelor of Engineering in Mechanical
What Will Put You Ahead
• Good Exposure to GD& T
• Proven experience as a Mechanical CAD Engineer with expertise in NX modeling and Teamcenter.
• Proficiency in using Siemens NX software for 3D modeling, assembly design, and drafting.
• Strong understanding of mechanical engineering principles and design standards.
• Solid knowledge of GD&T (Geometric Dimensioning and Tolerancing) pri...
....Read more...
Type: Permanent Location: Bangalore, IN-KA
Salary / Rate: Not Specified
Posted: 2024-04-16 08:11:30
-
Your Job
Disposition Quality Engineer
• Advanced knowledge of 6 Sigma tools, statistics, and GD&T
• Design of Experiments training
• QS/TS/IATF 16949 Internal auditing training
• Stamping/moulding/assembly plant experience
• Volume Graphics experience programming is highly desired
• ASQC Certification (CQE)
• Metrology knowledge: Understand CT Scanning Capabilities and Limitations and understand all potential measurement methods of components.
• Strong understanding of electrical connector part function
• Familiarity with 3D and 2D tolerance analysis and plastic manufacturing processes
Our Team
The Disposition Quality Engineer is responsible for providing support during the process of new product development.
This position plays a crucial role in the initial review of product drawings and the development of measurement strategies for the product.
Our Quality team works closely with the product features to ensure that the new product tool is validated.
The Disposition Quality Engineer is responsible for managing customer requirements and supporting New Product Development projects through early collaboration with design and manufacturing partners.
What You Will Do
Create a customer dimensional report according to requirements defined by AQPs per customer-specific expectations or industry specifications.
Assist plant & AQP needs according to project expectations.
Responsible for Advanced Product Quality Planning Disposition Phase activities as defined in the PDP Product Development Procedure.
Owner of the following PDP deliverables: measurement plans, measurement strategy delivery, disposition lead.
Significant support in qualification plans, and PPAP package.
May take direction from more senior department members for critical or large programs
Involved in and drive the development of Qualification Plans, metrology processes, etc.
Will lead disposition activities driving decision-making of changing tools, products, or drawings.
Follow product development and department procedures for quality and meet appropriate standards.
Highlights gaps when discovered and suggests solutions to correct them
Who You Are (Basic Qualifications)
• Bachelor's Degree preferred in a related field or related experience.
• 3-5 years in Automotive Quality Engineering or related field in a new product introduction environment.
What Will Put You Ahead
Required Experience:
2-3 years experience in the Product Development field of electrical connector systems in either design and/or dispositioning.
Needs to have experience in product development and design.
• Strong organization skills to anticipate, plan, organize and self-monitor workload.
Job is NOT TASKED-BASE, the job function is one of coaching and supporting the needs to the Product Development.
• Strong problem-solving skills and use of techniques (5-why, IS/IS NOT, fishbone diagram, etc)
• PC skills.
Working knowledge of spreadsheets and other Windows-based soft...
....Read more...
Type: Permanent Location: Bangalore, IN-KA
Salary / Rate: Not Specified
Posted: 2024-04-16 08:11:28
-
We are looking for a highly motivated sales professional to join our North America sales team! As a Professional Tool Specialist, you will sell, promote, and demonstrate the RIDGID & Greenlee lines of tools and equipment.
The ideal candidate will reside in Boston, MA or New England area.
This position reports to the Regional Sales Manager for the East Region.
Your job will be to offer unique perspectives and insights to the way customers view their business, align their insights and priorities, while tying those insights back to Emerson Professional Tools’ outstanding product differentiators.
You will be able to drive two-way communications and clearly articulate our value proposition and engage the end-customer in jointly addressing their business priorities.
In this Role, Your Responsibilities Will Be:
* Responsible for directly promoting the entire RIDGID/Greenlee product line to end-users in the Electrical, Mechanical, Utility, Plumbing, and Industrial segments at the local level.
* Works closely and develops relationships at all levels of the customer chain: Electricians, plumbers, linemen, foreman, superintendents, safety directors, work methods managers, purchasing agents, warehouse managers, project managers and owners.
* Capable of engaging with local union and non-union training centers to conduct training to apprenticeship and journeymen.
Responds to requests quickly and understands the fast pace in construction.
* Ability to communicate and demonstrate our value proposition of Faster-Safer-Easier that our tools bring to all members of the decision-making chain listed above.
* Develops and drives plans to get RIDGID/Greenlee products specified-in and standardized at key end-user customers in all segments and within defined territories.
Reports progress of demonstrations, trainings, and opportunities with 360 data capture application.
Submits presentations, expense reports, and other plans in a timely manner.
* Works with Product Managers on leads generated from large regional, national and global construction and utility firms and drives the placement of our tools at the local level.
* Working closely with PTS Leads to support multiple territories and channels within the defined area and will follow up on pre-qualified leads that are generated from RIDGID/Greenlee Territory Managers, Regional Sales Managers, Product Managers, and Distributor Sales, along with customer requests.
* Ability to work as part of a team and contribute to the success of the team by encouraging relationships with other RIDGID/Greenlee team members, end-user customers as well as distribution partners.
Communicate leads to the sales team, along with conveying competitive threats and market trends.
* The ability to understand the needs and challenges of our end user customers and articulate a solution to the need.
Who You Are:
You build the customer relationships.
You take positive action aft...
....Read more...
Type: Permanent Location: Boston, US-MA
Salary / Rate: Not Specified
Posted: 2024-04-16 08:07:32
-
POSITION SUMMARY: This position fills the role of quality expert and is responsible for designing, managing, maintaining, and continuously improving the company's quality systems to ensure that the business processes and products satisfy customer requirements and quality standards. This is a hands-on environment and the Quality Manager will oversee the quality assurance at two fabrication facilities and field construction activities at customer sites. The position requires extensive knowledge in heavy industrial fabrication and construction with expertise in welding methods, weld inspections, and non-destructive examination (NDE).
RESPONSIBILITIES & EXPECTATIONS:
* Manage the Quality Management System and recommend and implement enhancements to the system that result in improved quality performance, increased customer satisfaction, and/or simplification of processes to reduce costs.
* Understand, interpret, and verify compliance with AWS codes, specifications, customer requirements, and material marking requirements.
* Will have responsibility to manage welding procedure specification (WPS) and procedure qualification records (PQR) including development of procedures.
* Inspection of welding and metal fabricated components.
* Schedule CWIs, and manage subcontractors, to support quality inspections for field construction services.
* Development of customer specific inspection test plans and provide support for customers on quality systems-related issues.
* Responsible for assembling and maintaining all job data books, code forms, inspection documents, weld travelers, and material certifications.
* Schedule and perform audit activities, to include pre-audit planning, audit execution and evaluation and post-audit follow-up and recommendations.
* Assist departments with development and implementation of corrective and preventive action plans to improve overall Quality System compliance.
* Develop and review various quality reports, conduct various quality meetings, perform daily audits to ensure operation is running within defined operation/quality parameters and procedures.
* Development and oversight of a controlled document system, to include a final review of all changes to procedures, work instructions, forms, master lists and other associated documents to ensure quality certification requirements are met.
* Provide technical expertise in product development projects, design reviews, verification, validation and manufacturability involving R&D, Product Group, Procurement, Manufacturing and other departments.
* Establish/maintain key performance indicators and systems for tracking, reporting and improving performance.
* Facilitate and promote use of appropriate problem solving techniques for effective root cause analysis and successful corrective action.
* Skills in developing collaborative relationships to achieve results, analysis, continuous improvement a...
....Read more...
Type: Permanent Location: Pelham, US-AL
Salary / Rate: Not Specified
Posted: 2024-04-16 08:07:24
