-
The job scope is to provide support to the preparation of saline solutions used for the manufacture of contact lenses in order to assure but no limited to QSR, ISO 13485, GMP, and GLP compliance.
The job scope is to provide support to the preparation of saline solutions used for the manufacture of contact lenses in order to assure but no limited to QSR, ISO 13485, GMP, and GLP compliance.
Type: Permanent Location: Juana Diaz, US-PR
Salary / Rate: Not Specified
Posted: 2026-06-24 07:58:26
-
Wil jij aan de slag in een praktijk waar je samen met een ambitieus en hecht team de beste mondzorg aan patiënten gaat verlenen? Ben jij iemand die bij- en nascholing belangrijk vindt en ga je voor een langdurige samenwerking? Lees dan verder!
Voor onze tandartspraktijk in Zaltbommel zijn wij op zoek naar een tandarts voor 16 uur per week op de woensdagen en donderdagen.
Waar ga je werken?
Onze tandartsenpraktijk in Zaltbommel is een praktijk met 4 behandelkamers.
We zijn op zoek naar een nieuwe collega tandarts die ons gezellig en hecht team komt versterken.
Ons team bestaat uit 4 ervaren tandartsen, 2 mondhygiënisten, een team van gemotiveerde allround assistenten en een praktijkmanager.
Bij onze praktijk kunnen onze patiënten terecht voor algemene tandheelkunde en implantologie.
Voor de andere specialisaties verwijzen wij door naar collega tandartsen in de buurt.
Hierdoor kunnen we de patiënt voorzien van een breed palet aan tandheelkundige behandelingen.
Intercollegiaal overleg vinden we belangrijk, we bespreken casussen en leren op die manier van elkaar.
Ben je benieuwd naar ons? Reageer dan snel om met ons kennis te maken op de praktijk onder het genot van een kopje koffie!
Wat bieden wij jou?
* De mogelijkheid om te werken in loondienst of ZZP
* Uitstekende bij- en nascholingsmogelijkheden via onze Colosseum Dental Academy
* De mogelijkheid om jezelf te blijven ontwikkelen in het buitenland
Onze verwachtingen
Als tandarts ben je trots op jouw vak! Je gaat voor de beste zorg voor de patiënt en bent in staat om de patiënt waar nodig gerust te stellen.
Je stelt diagnoses en stelt een behandelplan op.
Je stuurt de assistenten aan en zorgt voor een correcte dossiervorming volgens de wet- en regelgeving.
Wij zoeken voor ons team een tandarts die een langdurige samenwerking ambieert en zich herkent in het volgende:
* Je bent BIG-geregistreerd en hebt enige jaren werkervaring als tandarts
* Je beschikt over een uitstekende beheersing van de Nederlandse taal
* Je vindt bij- en nascholing belangrijk in je persoonlijke en professionele ontwikkeling
* Je kan zowel goed zelfstandig als in teamverband werken
* Je bent in het bezit van een Verklaring Omtrent Gedrag (VOG) of bereid deze aan te vragen
Word jij onze nieuwe collega tandarts in Zaltbommel?
Herken jij jezelf in deze vacature? Dan maken we graag kennis met jou! Solliciteer via de sollicitatiebutton.
Heb je andere vragen? Dan mag je contact opnemen met Camiel (Recruiter) via camiel.naus@colosseumdental.nl of +31651903273
....Read more...
Type: Permanent Location: Zaltbommel, NL-GE
Salary / Rate: Not Specified
Posted: 2026-06-24 07:58:26
-
Mainly responsible for acknowledging inbound and/or outbound physical and systematically materials (raw materials, components and/or equipment's).
The position incumbent will lead warehouse activities to ensure the proper merchandise incoming or outbound acknowledge.
Serve as liaison between warehouse operations with other functionals areas through the plant like Sourcing, Planning, Finance, Quality and Engineering team members
Type: Permanent Location: Juana Diaz, US-PR
Salary / Rate: Not Specified
Posted: 2026-06-24 07:58:25
-
Your Job
Koch Ag & Energy Solutions (KAES) is seeking a contribution-minded Accounting Manager to join our Finance, Accounting and Risk organization supporting the Trade Support Accounting team.
In this role, you will lead a team responsible for month-end close activity related to derivative and physical inventory trading, partnering with business capabilities to provide transparent financial analysis, actionable insights, and strong internal financial controls.
In this role, you will bring strong knowledge of US GAAP requirements, economic thinking, leadership capability, and a track record of leading teams through process improvement by leveraging technology and data.
You will play a key role in developing talent within the Trade Support Accounting team while helping the business understand key financial drivers to support decision-making.
Our Team
The Trade Accounting Manager will be a part of the larger Controllership Team, which oversees consolidated financials, audits, taxes, cost management, and reporting.
This position is located at the Wichita, KS headquarters and offers a flexible work schedule.
What You Will Do
* Lead the month-end accounting close process to ensure the accurate accounting and recording of critical business transactions.
This includes providing a clear understanding of key financial drivers and delivering insightful analyses to support decision-making.
* Partner with corporate finance teams and other capabilities to advance accounting and reporting initiatives.
* Drive improvements and transformation in critical accounting period closing activities.
This encompasses overseeing account reconciliations, maintaining strong internal control stewardship, and ensuring compliance with both US GAAP and foreign statutory financial reporting requirements.
* Challenge the status quo and drive continuous improvement with an entrepreneurial mindset - identifying better ways to measure, explain, and improve business performance while leveraging technology.
* Develop team members through coaching and training to enhance their application of Principle Based Management.
Who You Are (Basic Qualifications)
* Experience in accounting, finance, or other related roles that demonstrates a professional understanding of accounting and financial concepts and cost accounting principles.
* Supervisory Experience - Experience leading and developing individuals and/or a team.
What Will Put You Ahead
* Bachelor's degree or higher in Finance, Accounting, Economics, or related Business field.
* Experience using OneStream, Power BI, Alteryx, or other data visualization tools and/or other advanced technologies (machine learning, AI, etc.) and process transformation / process implementation experience.
* Knowledge of US GAAP requirements, specifically in the areas of derivative and inventory accounting.
* Experience and strong desire to improve financial processes through automation, technol...
....Read more...
Type: Permanent Location: Wichita, US-KS
Salary / Rate: Not Specified
Posted: 2026-06-24 07:57:57
-
Your Job
Koch Ag & Energy Solutions (KAES) is seeking a contribution-minded Senior Accounting Analyst to join our Finance, Accounting and Risk organization, focused on trade support accounting and associated controls and stewardship of company assets.
This position requires a strong foundation in financial transactions and accounting principles, with the ability to develop advanced ERP and data knowledge, and apply strategic thinking to drive transformational improvements.
The analyst will collaborate across multiple capabilities and leadership levels within our global operations.
Within KAES, the role of a Senior Accounting Analyst has transformed over the years and is now highly focused on being problem solvers and solution providers with a sense of urgency.
It is also about building partnerships with the business to drive profitability by analyzing margin trends, market drivers, working capital, business risks, cashflow and many other aspects! Join the team and advance your career with leadership development and educational opportunities to help you gain the capabilities needed to be a modern-day problem solver.
A successful candidate will have the proven ability to work effectively with detailed and time-sensitive tasks, ensuring accuracy, compliance, and timely completion of critical assignments.
A deep understanding of business processes, which enhances financial decision-making and supports the achievement of organizational goals is essential.
Our Team
The accounting analyst will be a part of the larger Controllership Team, which oversees consolidated financials, audits, taxes, cost management, and reporting.
This position is located at the Wichita, KS headquarters and offers a flexible work schedule.
What You Will Do
* As a financial partner to the business, you will ensure the accurate accounting and recording of critical business transactions as part of the month-end close process.
This includes providing a clear understanding of key financial drivers and delivering insightful analyses to support decision-making.
* Develop, document, and sustain efficient accounting processes that provide strong, risk-based internal controls and scale with business growth.
* Drive improvements and transformation in critical accounting period closing activities.
This encompasses overseeing account reconciliations, maintaining strong internal control stewardship, and ensuring compliance with both US GAAP and foreign statutory financial reporting requirements.
* Analyze the general ledger and financial statements, focusing on key performance indicators (KPIs) to deliver meaningful insights to business partners.
Your role involves leveraging data and advanced analytical tools to extract relevant information and effectively communicate the business narrative.
By understanding business goals and constraints, you will solve complex problems and add tangible value to the organization.
* Support special projects including system ...
....Read more...
Type: Permanent Location: Wichita, US-KS
Salary / Rate: Not Specified
Posted: 2026-06-24 07:57:57
-
Vancouver Clinic is seeking a Washington State credentialed MA- Phleb otomist for our Camas location.
In this role, you will serve as a professional representative of the laboratory by providing excellent customer service and skilled venipuncture collection.
This position works collaboratively with healthcare team members to support positive outcomes for patients and the organization through phleb otomy services, specimen collection and handling, and accurate use of laboratory information systems.
A strong understanding of department procedures, as well as computerized EMR and Lab Information Systems, is essential.
Location: Camas ( 4500 SE Columbia Palisades Dr, Camas, WA 98607)
Schedule: Monday-Friday 7:30AM-4:30PM, Rotating Saturdays 7:30AM-12:00PM
Hiring r ange starts at $22.25-$27.45 per hour, and placement in the range depends on an evaluation of experience.
Differentials: Saturday $2.56/ hr
Requirements:
* High School diploma or equivalent.
* Current Washington State Medical Assistant- Phl e b otomist credential required or ability to obtain within 90 days of hire.
* Current American Heart Association Health Care Provider BLS CPR certification required .
* Minimum of one year of experience using blood collection techniques in a clinical lab setting is preferred.
* Ability to calm patients and work under stressful conditions.
Vancouver Clinic provides care across a wide range of medical decisions.
This includes care and opinions on vaccinations, reproductive health, end-of-life decision-making, and gender affirming treatment.
The ability to work, with or without reasonable accommodation, with a diverse population of patients and colleagues seeking or considering care in all areas is an essential function of all positions at the Clinic.
Pay Range:
$21.81 - $30.53
The above information is intended to indicate the general nature and level of work required in this position.
It is not designed to contain or be interpreted as a comprehensive description of all duties, responsibilities, and qualifications required of those assigned to this job.
We offer a competitive Total Rewards Program.
Eligibility for benefits is dependent on factors such as position type and FTE.
Benefit-eligible employees qualify for benefits beginning on the first of the month following one month of employment.
Vancouver Clinic offers medical, dental, vision, life insurance, AD&D, long term disability, health savings account, flexible spending account, employee assistance program, and multiple supplemental benefits (voluntary life, critical illness, accident, hospital indemnity, identity theft protection, legal services, etc.).
We also offer a 401k retirement plan, along with an employer matching contribution up to 4%.
Compensation packages and time off programs vary and are dependent on factors such as department, position type, primary work state and FTE.
Contact your Recruiter for full information.
Vancouver Clinic is proud to be...
....Read more...
Type: Permanent Location: Vancouver, US-WA
Salary / Rate: Not Specified
Posted: 2026-06-24 07:57:02
-
Vancouver Clinic is looking for a Front Desk Representative to join our team at our Salmon Creek 2 clinic.
To be successful in this role you will need a friendly demeanor, great attitude, and the desire to make a positive impact on our patients .
Responsibilities can include providing excellent customer service to our patients by welcoming and greeting patients and their families, collecting co- pays , obtaining and completing insurance information, answering phone calls , and scheduling appointments .
If you can multitask, work well with others as part of a team, and maintain a positive attitude while working in a fast-paced environment, we want you on our team!
Location : Salmon Creek 2 ( 252 9 NE 139th St, Vancouver, WA 98686)
Schedule :
Saturday and Sunday6:30AM to 5:30PM
Saturday and Sunday12:00pm to 11:00PM
Hiring range generally between $18.00/hour to $21.37/hour, and placement in the range depends on an evaluation of experience.
* Evening Differential $3.00/hour & Weekend Differential Pay $2.56/hour
*
Requirements:
* High School Diploma or equivalent required.
* Minimum of 1 year of customer service experience required .
* Minimum of 1 year of medical front office experience preferred.
* Experience with Epic preferred.
* Excellent phone skills and customer service behaviors.
* Strong computer keyboarding skills required .
Vancouver Clinic provides care across a wide range of medical decisions.
This includes care and opinions on vaccinations, reproductive health, end-of-life decision-making, and gender affirming treatment.
The ability to work, with or without reasonable accommodation, with a diverse population of patients and colleagues seeking or considering care in all areas is an essential function of all positions at the Clinic.
Pay Range:
$17.31 - $24.24
The above information is intended to indicate the general nature and level of work required in this position.
It is not designed to contain or be interpreted as a comprehensive description of all duties, responsibilities, and qualifications required of those assigned to this job.
We offer a competitive Total Rewards Program.
Eligibility for benefits is dependent on factors such as position type and FTE.
Benefit-eligible employees qualify for benefits beginning on the first of the month following one month of employment.
Vancouver Clinic offers medical, dental, vision, life insurance, AD&D, long term disability, health savings account, flexible spending account, employee assistance program, and multiple supplemental benefits (voluntary life, critical illness, accident, hospital indemnity, identity theft protection, legal services, etc.).
We also offer a 401k retirement plan, along with an employer matching contribution up to 4%.
Compensation packages and time off programs vary and are dependent on factors such as department, position type, primary work state and FTE.
Contact your Recruiter for full information.
Vancouver Clinic is proud ...
....Read more...
Type: Permanent Location: Vancouver, US-WA
Salary / Rate: Not Specified
Posted: 2026-06-24 07:57:01
-
Howmet Aerospace Inc.
(NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries.
Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels.
With $8.3 Billion in revenue in 2025, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world.
To learn more about the way Howmet Aerospace Inc.
is advancing the sustainability of our customers, markets, and communities where we operate, review the 2025 Environmental Social and Governance report at www.howmet.com/esg-report .
Follow: LinkedIn , Twitter , Instagram , Facebook , and YouTube .
Equal Opportunity Employer:
Howmet is proud to be an Equal Employment Opportunity employer.
We are committed to creating an inclusive environment for all employees.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics.
If you need assistance to complete your application due to a disability, please email TalentAcquisitionCoE_Howmet@howmet.com QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
EDUCATION AND/OR EXPERIENCE
High school diploma or GED and six to twelve months related experience and/or training; or equivalent combination of education and experience
LANGUAGE SKILLS
Ability to read and comprehend simple instructions, short correspondence, and memos.
Ability to write simple correspondence.
Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization.
MATHEMATICAL SKILLS
Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume.
Ability to apply concepts of basic algebra and geometry.
REASONING ABILITY
Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form.
Ability to deal with problems involving several concrete variables in standardized situations.
CERTIFICATES, LICENSES, REGISTRATIONS
Ability to access and operate a forklift and other powered industrial equipment to approved OSHA standards.
PHYSICAL DEMAND
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable...
....Read more...
Type: Permanent Location: Fontana, US-CA
Salary / Rate: Not Specified
Posted: 2026-06-24 07:56:54
-
Howmet Aerospace Inc.
(NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries.
Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels.
With $8.3 Billion in revenue in 2025, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world.
To learn more about the way Howmet Aerospace Inc.
is advancing the sustainability of our customers, markets, and communities where we operate, review the 2025 Environmental Social and Governance report at www.howmet.com/esg-report .
Follow: LinkedIn , Twitter , Instagram , Facebook , and YouTube .
Equal Opportunity Employer:
Howmet is proud to be an Equal Employment Opportunity employer.
We are committed to creating an inclusive environment for all employees.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics.
If you need assistance to complete your application due to a disability, please email TalentAcquisitionCoE_Howmet@howmet.com
* High School Diploma or GED from an accredited institution
* Strong mechanical aptitude and understanding of tooling setups.
* Employees must be legally authorized to work in the United States.
Verification of employment eligibility will be required at the time of hire.
Visa sponsorship is not available for this position.
* This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S.
person status.
ITAR defines U.S.
person as an U.S.
Citizen, U.S.
Permanent Resident (i.e.
'Green Card Holder'), Political Asylee, or Refugee.
* This position will physically require the incumbent to perform duties standing, walking, overhead reaching, lifting (35 - 40lbs), pushing and pulling totes, and leaning over machines, all equally on a regular basis.
Preferred Qualifications:
* 2 Years experience operating progressive cold heading machines.
* Ability to read and interpret technical drawings and specifications.
* Experience with basic instrument tools (micrometer, caliper, optical comparator).
* Familiarity with lean manufacturing and quality systems.
About Howmet Aerospace:
Howmet Aerospace has an opening for a Progressive Header Operator 2 nd Shift in our Tucson, AZ location.
Howmet Aerospace Inc.
(NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries.
Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels.
With $7.4 Billion in revenue in...
....Read more...
Type: Permanent Location: Tucson, US-AZ
Salary / Rate: Not Specified
Posted: 2026-06-24 07:56:53
-
Howmet Aerospace Inc.
(NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries.
Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels.
With $8.3 Billion in revenue in 2025, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world.
To learn more about the way Howmet Aerospace Inc.
is advancing the sustainability of our customers, markets, and communities where we operate, review the 2025 Environmental Social and Governance report at www.howmet.com/esg-report .
Follow: LinkedIn , Twitter , Instagram , Facebook , and YouTube .
Equal Opportunity Employer:
Howmet is proud to be an Equal Employment Opportunity employer.
We are committed to creating an inclusive environment for all employees.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics.
If you need assistance to complete your application due to a disability, please email TalentAcquisitionCoE_Howmet@howmet.com
* EDUCATION:
+ Minimum High School diploma or equivalent (GED)
+ Ability to read and comprehend written instructions in the English language
* EXPERIENCE:
+ Consistent and stable work history
+ Manufacturing / Factory experience preferred but not required
+ Quality Assurance experience preferred but not required
* PHYSICAL DEMANDS/EQUIPMENT USED:
+ Ability to lift up to 20 pounds occasionally and 10 pounds consistently
* SKILLS AND ABILITIES:
+ Strong interpersonal skills and ability to work in a team-oriented environment
+ Basic computer skills are required
+ High degree of manual dexterity
* Employees must be legally authorized to work in the United States.
Verification of employment eligibility will be required at the time of hire.
Visa sponsorship is not available for this position.
* This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items.
*
*The work schedule for this position is 3rd shift Monday through Friday from 10:30pm to 6:30am.
JOB RESPONSIBILITIES:
* Correctly wand onto the shop floor data system for labor
* Read and follow appropriate product criteria, AIs, and elements
* Follow all safety precautions as spelled out in the Activity Instruction
* Pre-finish Core Inspection
* Visually inspect cores for unacceptable defects per the product criteria or AI such as cracks, chips, excess parting lines, negatives, crazing, and positives
...
....Read more...
Type: Permanent Location: Morristown, US-TN
Salary / Rate: Not Specified
Posted: 2026-06-24 07:56:52
-
Howmet Aerospace Inc.
(NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries.
Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels.
With $8.3 Billion in revenue in 2025, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world.
To learn more about the way Howmet Aerospace Inc.
is advancing the sustainability of our customers, markets, and communities where we operate, review the 2025 Environmental Social and Governance report at www.howmet.com/esg-report .
Follow: LinkedIn , Twitter , Instagram , Facebook , and YouTube .
Equal Opportunity Employer:
Howmet is proud to be an Equal Employment Opportunity employer.
We are committed to creating an inclusive environment for all employees.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics.
If you need assistance to complete your application due to a disability, please email TalentAcquisitionCoE_Howmet@howmet.comBASIC QUALIFICATIONS:
* B.S.
Degree from an accredited institution.
* Minimum of 7 years of experience in a supply chain position; minimum of 5 years of leadership experience.
* Employees must be legally authorized to work in the United States.
Verification of employment eligibility will be required at the time of hire.
Visa sponsorship is not available for this position.
PREFERRED REQUIREMENTS:
* B.S.
Degree in supply chain
* APICS/ASCM CPIM certification.
* Experience with scheduling manufacturing production.
* Experience developing relationships with customers and suppliers.
* Excellent communication skills, oral and written.
* Demonstrated project management skills.
* Excellent analytical skills.
* Continuous improvement/growth mindset.
* Proficient in practical application of MRP logic.
* Knowledge of Oracle/ERP system.
This position will be in our Plant 3, Whitehall Casting Operation.
This is a Staff Level position with high visibility, collaborating cross functionally to drive results as part of the Plant Leadership team.
Job Responsibilities:
* Lead and mentor a team of planning, scheduling, shipping, and outside processing professionals.
* Develop and execute supply chain strategies aligned with plant goals for cost, quality, delivery, and compliance.
* Lead sourcing and supplier performance management for raw materials (e.g., waxes, ceramics, alloys) and outside processes (e.g., HIP, NDT, heat treatment).
* Oversee master production scheduling (MPS) and materials requirements planning (MRP) for cast...
....Read more...
Type: Permanent Location: Whitehall, US-MI
Salary / Rate: Not Specified
Posted: 2026-06-24 07:56:52
-
Howmet Aerospace Inc.
(NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries.
Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels.
With $8.3 Billion in revenue in 2025, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world.
To learn more about the way Howmet Aerospace Inc.
is advancing the sustainability of our customers, markets, and communities where we operate, review the 2025 Environmental Social and Governance report at www.howmet.com/esg-report .
Follow: LinkedIn , Twitter , Instagram , Facebook , and YouTube .
Equal Opportunity Employer:
Howmet is proud to be an Equal Employment Opportunity employer.
We are committed to creating an inclusive environment for all employees.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics.
If you need assistance to complete your application due to a disability, please email TalentAcquisitionCoE_Howmet@howmet.comBasic Qualifications:
* Three years related quality experience or training in accordance with the defined skills training matrix progression; or equivalent combination of education and experience.
* Prior experience in a Quality Inspector
* Ability to read and interpret documents such as safety rules, operating instructions, and procedures manuals
* Ability to write routine reports and correspondence
* Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions and decimals.
Ability to compute rate, ratio, and percent.
* Ability to apply common sense understanding to carry out detailed written or oral instructions.
Ability to deal with problems involving a few concrete variables in standardized situations.
* Employees must be legally authorized to work in the United States.
Verification of employment eligibility will be required at the time of hire.
Visa sponsorship is not available for this position.
Work Environment
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts.
The noise level in the work environment is usually moderate, however, it may be occasionally loud enough where hearing protection is required.
Work hours - 5 days Monday through Friday, 8 hours a day, with overtime to meet ...
....Read more...
Type: Permanent Location: Carson, US-CA
Salary / Rate: Not Specified
Posted: 2026-06-24 07:56:51
-
Howmet Aerospace Inc.
(NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries.
Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels.
With $8.3 Billion in revenue in 2025, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world.
To learn more about the way Howmet Aerospace Inc.
is advancing the sustainability of our customers, markets, and communities where we operate, review the 2025 Environmental Social and Governance report at www.howmet.com/esg-report .
Follow: LinkedIn , Twitter , Instagram , Facebook , and YouTube .
Equal Opportunity Employer:
Howmet is proud to be an Equal Employment Opportunity employer.
We are committed to creating an inclusive environment for all employees.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics.
If you need assistance to complete your application due to a disability, please email TalentAcquisitionCoE_Howmet@howmet.comBasic Qualifications:
* Training will be provided to the selected candidate! Entry level candidates encouraged to apply!
* Ability to read and understand all warning labels, JSA and MSDS
* Ability to be Mobile Equipment Certified
* Ability to work in a team environment.
* 1 years manufacturing experience
* High School Diploma, GED, or 2 years work experience
* Employee must be legally authorized to work in the United States.
Verification of employment eligibility will be required at the time of hire.
Visa sponsorship is not available for this position.
Preferred Qualifications:
* Foundry or casting experience is preferred
* Manufacturing experience
Physical Demands:
* Lifting: Medium - Lift on an occasional basis a maximum of 50 pounds with frequent or constant lifting of 25 pounds.
* Standing: Constantly (greater than 80% of workday)
* Walking: Constantly (greater than 80% of workday)
* Bending and Twisting: Constantly (greater than 80% of workday)
* Temperature Extremes (percent of time working in non-climate controlled, production environment): Constantly (greater than 80% of workday)
* Noise (percent of time working in noisy, production environment): Constantly (greater than 80% of workday)
This description is a general statement of duties and responsibilities performed on a regular and continuous basis.
This description is not intended to be all inclusive and other related duties may be assigned.
* Employees must be legally authorized to work in the United States.
Verification of employment eligibility will b...
....Read more...
Type: Permanent Location: Barberton, US-OH
Salary / Rate: Not Specified
Posted: 2026-06-24 07:56:50
-
BASIC REQUIREMENTS:
* Associate's degree with 4 years of experience in maintenance/facilities OR High School Diploma or GED with 7 years of experience in maintenance/facilities
* Employees must be legally authorized to work in the United States.
Verification of employment eligibility will be required at the time of hire.
Visa sponsorship is not available for this position.
PREFERRED QUALIFICATIONS:
* Bachelor's degree in Engineering or related field from an accredited institution
* Good understanding of hydraulic/pneumatic and their relationship to electrical control.
* Good understanding of chemical cleaning processes and chemical waste disposal
* Good mechanical aptitude (piping, layouts, structural, etc.) and blueprint reading capabilities
* Ability to read, analyze and interpret general business periodics, professional journals, technical procedures, or government regulations
* Strong verbal and written communication skills, analytical skills
* Past experience with AutoCAD and/or Solid Works with strong attention to details
* Previous experience with managing projects and working with outside contractors
* Good work ethic and adherence to safety protocols and culture
* Knowledge of MS Office and AutoCAD
* Able to work in a self-directed or team environment and have good organizations skills
* Ability to work independently and with initiative
* Ability to maintain a positive and professional attitude
We are seeking a highly motivated and skilled Facilities Specialist to support our Plant 3 manufacturing and processing operations by driving equipment reliability, optimizing preventive maintenance, and troubleshooting complex technical issues.
This role requires strong analytical skills, a proactive mindset, and the ability to work cross-functionally with production, scheduling, safety, and other engineering teams to ensure maximum equipment uptime and operational efficiency with an emphasis on delivery.
Job Roles
* Systems thinker--sees the business and its operation holistically; understands actions and reactions; considers multiple pathways of potential effect before decisions; thinks strategically about interventions with an eye toward scale
* Optimizer--constantly challenging the organization to work smarter; supports others to ensure they have what they need to do their work successfully
* Anticipation--looks ahead to minimize potential issues and maximize advantages; prepares others for what comes next
* Operational accelerator--drives continuous improvement; understands ramifications of automation and other advances; advocates for safety, ergonomics and scalable solutions
* Organization and structure--works within existing structures while striving to improve and standardize them; provides accurate information; galvanizes others toward common goals
* Influence--leverages knowledge, relationship, data and perspective to persuade,...
....Read more...
Type: Permanent Location: Whitehall, US-MI
Salary / Rate: Not Specified
Posted: 2026-06-24 07:56:50
-
Howmet Aerospace Inc.
(NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries.
Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels.
With $8.3 Billion in revenue in 2025, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world.
To learn more about the way Howmet Aerospace Inc.
is advancing the sustainability of our customers, markets, and communities where we operate, review the 2025 Environmental Social and Governance report at www.howmet.com/esg-report .
Follow: LinkedIn , Twitter , Instagram , Facebook , and YouTube .
Equal Opportunity Employer:
Howmet is proud to be an Equal Employment Opportunity employer.
We are committed to creating an inclusive environment for all employees.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics.
If you need assistance to complete your application due to a disability, please email TalentAcquisitionCoE_Howmet@howmet.comBasic Qualifications
* Bachelor's degree from an accredited institution
* A minimum of 3 years project management, equipment installation, or industrial automation
* Employees must be legally authorized to work in the United States.
Verification of employment eligibility will be required at the time of hire.
Visa sponsorship is not available for this position.
Preferred Qualifications
* 5 years of experience in project management, equipment installation, or industrial automation
* Bachelor's degree in engineering from an accredited institution
* PMP Certification
* Ability to work nights and weekends occasionally as projects demand
* Strong understanding of electrical and mechanical systems in an industrial environment
* Ability to present project status to executive leadership
* Ability to interpret codes, and industry regulations
* Proficiency with Autodesk AutoCAD and Office 365
Job Roles
* Anticipation and forecasting--understands manufacturing operation and production rhythms; maintains understanding of equipment, scope of scheduled changes and installations
* Collaboration and coordination--interacts with internal stakeholders and external service providers to minimize disruptions and cascading negative impact; manages projects throughout their lifecycle; owns and assigns tasks; follows up as needed; creates mutual goals and maximizes mutual interests
* Relationship and communication--creates consistent communication and timely updates; provides progress updates and anticipated disruptions, status reports; relays infor...
....Read more...
Type: Permanent Location: Whitehall, US-MI
Salary / Rate: Not Specified
Posted: 2026-06-24 07:56:48
-
Howmet Aerospace Inc.
(NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries.
Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels.
With $8.3 Billion in revenue in 2025, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world.
To learn more about the way Howmet Aerospace Inc.
is advancing the sustainability of our customers, markets, and communities where we operate, review the 2025 Environmental Social and Governance report at www.howmet.com/esg-report .
Follow: LinkedIn , Twitter , Instagram , Facebook , and YouTube .
Equal Opportunity Employer:
Howmet is proud to be an Equal Employment Opportunity employer.
We are committed to creating an inclusive environment for all employees.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics.
If you need assistance to complete your application due to a disability, please email TalentAcquisitionCoE_Howmet@howmet.comEDUCATION and/or EXPERIENCE:
* 3- 5 years manufacturing experience (aerospace, fasteners, industrial backgrounds preferred)
* Supervisory experience leading teams of 40 people; Performance management skills.
* Analytical skills; personal accountability; strong organizational skills.
* Effective verbal and written communication skills with all levels of organization, especially with direct employees.
* Intermediate use of ERP (JDE), MS Word, Excel, Access, Outlook; other PowerBI and productivity tools.
* Quality focused & production driven.
REQUIRED SKILLS:
* Must be capable of working effectively with minimal direction and supervision.
* Process improvement experience is desirable (Six Sigma, Lean Manufacturing, 5-S).
* Must possess excellent problem solving, organizational and verbal & written communication skills.
* Solid, overall business acumen and a strong mindset for continuous improvement.
* Attention to detail and an attitude of 100% compliance with all company and regulatory requirements.
* Work requires verbal communication and interpersonal skills.
* Ability to motivate teams to produce quality materials within tight timeframes and simultaneously manage several projects.
* High energy level and ability to work flexible hours.
* Strong computer skills (e.g.
MS Word, MS Excel, MRP).
* Strong attention to detail and results oriented.
Salary Range:
The base pay range for this position in California is $110,000 - $120,000/year.
Pay is based on market location and may vary depending on job-related knowledge, ...
....Read more...
Type: Permanent Location: Brea, US-CA
Salary / Rate: Not Specified
Posted: 2026-06-24 07:56:48
-
JOB PURPOSE:
This position contributes to Blarney Castle's success by ensuring total customer dedication in efficiently servicing our customers.
Works as part of a team to achieve store objectives.
Follows all safety and operating procedures and adheres to fresh food handling guidelines and standards.
Ensures a welcoming environment that surprises and delights our customers in full compliance with company standards and state and federal laws.
KNOWLEDGE AND EXPERIENCE:
• High school diploma or GED is required; candidates without degrees who have relevant retail experience, and a good work record will be given consideration.
• Good interpersonal skills are necessary to connect with our customers and provide information in an accurate and courteous manner.
• Basic math skills are necessary to handle cash transactions, calculate change, volume sales, and tax percentages and balance cash registers.
• Must be able to read and apply company procedure documents.
• Must be able to work in a team environment and follow direction from assistant manager and store manager.
• Use good reasoning and organizational skills to be able to handle multiple tasks accurately and courteously.
Must be able to monitor activity both within the store and at gas pumps.
• Must be able to operate microwaves, small ovens and other kitchen equipment.
• Ability to effectively perform responsibilities under stress while demonstrating a calm demeanor during periods of high volume.
MAJOR DUTIES:
• Displaying a customer comes first attitude by ensuring every customer is provided with immediate and undivided attention.
• Actively participate in Company sales promotions and programs.
• Complete company-sponsored training and required updates within specified training periods.
• Successfully complete specialized training on food preparation, handling and storage.
• Know promotions every week/month and make suggestions to customers to increase sales.
• Receive financial payments, counts back change as necessary.
• Operates cash register, credit card scanners, lottery ticket machines and other equipment to complete sales transactions.
• Monitors activity at gas pumps, ensuring customers can dispense fuel safely and financial transactions are handled correctly.
• Accurately receive and prepare orders for deli foods.
• Always Follow Serve-Safe and portion control standards and recipes.
• Control deli waste, food spoilage, and inventory out dates.
• Must be able to read alpha and numeric data on cash registers and procedure documents.
• Ensure food/equipment temperature logs are completed in a timely and accurate manner.
• Physical Requirements: Requires ability to lift up to fifty (50) pounds throughout a normal shift, moving and stacking merchandise, cleaning, sweeping, shoveling snow, and being able to stoop, bend, and stand for extended periods of time.
Must be able to work inside coolers to maintain Page 2/2 inventory.
Must be able to asc...
....Read more...
Type: Permanent Location: Kalkaska, US-MI
Salary / Rate: Not Specified
Posted: 2026-06-24 07:56:38
-
The North America team is currently looking for an Inventory Control specialist on 1 st shift to join our Paris, IL facility.
The Inventory Control specialist supports inventory control functions to ensure inventory accuracy by working with the team to develop corrective actions to eliminate inventory discrepancies.
Your Impact
* Perform cycle counts as outlined in the cycle count program.
* Validate inventory adjustments.
* Analyze data from both production areas and the warehouse processes.
* Assist in root cause analysis to reduce inventory accuracy issues.
* Work with production to ensure that transactions are completed in a timely and accurate manner.
* Continuously monitor inventory to prevent erroneous transactions and other discrepancies.
* Ensure company policy is being followed regarding inventory reporting for scrap, obsolescence, and loss.
* Monitor warehouse movements and inventory for accuracy.
* Follow required safety and work procedures.
* Maintain a clean and orderly work area to 5S Standards.
* Implement all aspects of GPT's Lean and Quality Management systems.
* Other responsibilities as assigned.
Your Experience and Qualifications
* High school diploma or GED required.
* 3 years of inventory or production control experience is desired.
* Requires the ability to drive a forklift.
Prior experience is desired.
Must pass forklift certification.
* Solid math skills
* Ability to read, write.
* Strong aptitude with Microsoft and various operating systems, email communication.
* Ability to communicate effectively with peers, managers and across departments.
* Strong analytical ability.
* Detailed oriented.
* Excellent organizational skills
* Previous experience in a manufacturing environment preferred.
Your Compensation and Benefits
* Expected total compensation for this role will be $15.90 to $28.94 per hour depending upon job related knowledge, experience, and skills.
* Up to 5% potential variable incentive program.
* Benefits will include the ability to elect health care and wellness plans, dental and vision plans, 401(k) Savings Plan with company match, paid holidays, paid time off, health savings and flexible spending accounts, reimbursement for continuing education, life insurance, and other supplemental insurance plans.
Your Workplace
You will be working onsite in role based in Paris, IL.
While performing the duties of this job, the employee works with and near large machinery and equipment daily.
The noise level in the work environment is usually loud.
The employee is exposed to a variety of extreme conditions including temperatures ranging from 40°F to 105°F.
The physical demands here are representative of those that must be met by an employee to successfully perform the essential job functions of this job.
While performing the duties of this job, the employee is occasionally required...
....Read more...
Type: Permanent Location: Paris, US-IL
Salary / Rate: Not Specified
Posted: 2026-06-24 07:56:29
-
The North America team is currently looking for a Maintenance Technician on 3 rd shift to join our Taylorville, IL facility.
The Maintenance Technician installs, troubleshoots, repairs, and optimizes a wide range of production and facilities equipment in a manufacturing environment.
This role supports CNC press brakes, lasers, punch presses, extrusion equipment, and other highly automated machinery, as well as plant utilities and building systems.
Work spans mechanical, electrical, electronic controls, hydraulic, and pneumatic systems, with hands ‑ on involvement in gearboxes, drivetrains, and machinery rigging.
Prior experience with welding, plumbing, and HVAC is strongly desired.
Your Impact
* Perform corrective, preventive, and predictive maintenance on CNCs, PLC ‑ controlled systems, electronic control systems, hydraulic and pneumatic equipment, gearboxes, drivetrains, conveyors, and automation cells.
* Diagnose faults using electrical/mechanical schematics, ladder logic, I/O mapping, HMI diagnostics, and precision measurement tools.
* Install, align, and commission new or relocated machinery; execute machinery rigging, leveling, anchoring, and guarding.
* Maintain CNC press brakes, lasers, punch presses, and extrusion equipment.
* Troubleshoot PLCs, VFDs, sensors, actuators, safety relays, e ‑ stops, and control panels.
* Perform wiring and modifications per NFPA 70/NEC standards.
* Service pumps, valves, cylinders, accumulators, FRLs, regulators, and manifolds.
* Rebuild/replace bearings, seals, belts, couplings, chains/sprockets, ball screws, and linear guides.
* Support HVAC, plumbing, lighting, doors/docks, compressed air, and general building systems.
* Perform basic MIG/TIG/Stick welding and light fabrication.
* Complete work orders and PMs.
* Recommend improvements to reduce downtime.
* Follow LOTO, machine guarding, PPE, and confined ‑ space procedures.
Your Experience and Qualifications
* High school diploma or GED.
* Technical certificate or AAS preferred.
* 3+ years industrial maintenance experience required.
* Demonstrated ability to work independently with minimal supervision with a high level of initiative.
* Manages time effectively and remains organized.
* Ability to troubleshoot electrical, mechanical, hydraulic, and pneumatic systems.
* Able to read schematics and technical manuals.
* Experience with industrial lifting equipment.
* Welding/fabrication skills.
* Basic plumbing and HVAC maintenance.
* PLC/HMI troubleshooting.
* Predictive maintenance technologies.
* Lift/push/pull up to 50 lbs.
* Stand, walk, climb, kneel, and work in various industrial conditions.
Your Compensation and Benefits
* Expected total compensation for this role will be $20.24 to $42.86 per hour, depending upon job related knowledge, experience, and skills, plus $3.00 shift differential.
* Up...
....Read more...
Type: Permanent Location: Taylorville, US-IL
Salary / Rate: Not Specified
Posted: 2026-06-24 07:56:27
-
The North America team is currently looking for a Team Leader on 1st shift to join our Revecing department at the Taylorville, IL facility.
The Team Leader provides hands-on, daily support to ensure efficient, accurate, and safe outbound operations.
This role coordinates workflow, assigns tasks, assists with training, and serves as the first point of contact for hourly shipping staff during the shift.
The Team Leader supports department goals related to productivity, quality, accuracy, safety, and ship complete on time performance.
Your Impact
Operational Leadership
* Coordinate and monitor daily shipping activities to meet production and delivery schedules.
* Assign work to team members and adjust labor based on workload, staffing, and priority shipments.
* Assist with resolving operational issues such as delays, order discrepancies, or inventory concerns.
* Perform shipping tasks alongside the team, including picking, packing, staging, and loading.
Quality & Accuracy
* Ensure all outbound orders meet company standards for accuracy, packaging, and documentation.
* Verify that labeling, paperwork, and carrier requirements are completed correctly.
* Support continuous improvement efforts and recommend process enhancements.
Safety & Compliance
* Promote and uphold a safe work environment by following and enforcing safety policies and procedures.
* Conduct or assist with safety checks, equipment inspections, and incident reporting.
* Ensure compliance with company policies, DOT requirements, and customer‑specific shipping guidelines.
People Support
* Provide on‑the‑job training for new team members and cross-training for existing staff.
* Offer coaching and real-time feedback to team members to support performance and skill development.
Communication & Reporting
* Serve as the primary point of communication between hourly staff and supervisor/manager.
* Provide updates on productivity, staffing needs, equipment issues, and workflow concerns.
* Assist with tracking KPIs such as order accuracy, throughput, and on-time shipment metrics.
Your Experience and Qualifications
* Prior experience in a shipping, warehouse, or distribution environment required.
* Strong understanding of shipping procedures, documentation, and carrier requirements.
* Demonstrated leadership ability or previous lead experience.
* Ability to lift, push, pull, and move materials up to 50 lbs.
as needed.
* Basic computer skills (ERP, email, handheld scanners).
* Experience operating forklifts, pallet jacks, or other warehouse equipment.
* Familiarity with Lean principles or continuous improvement practices.
* Previous experience in a team lead or training role.
* Strong communication and interpersonal skills
* Attention to detail and problem‑solving
* Ability to prioritize in a fast‑paced environment
* Team‑oriented mindset
...
....Read more...
Type: Permanent Location: Taylorville, US-IL
Salary / Rate: Not Specified
Posted: 2026-06-24 07:56:26
-
The North America team is currently looking for a Continuous Improvement Technician to join our quality department at the Taylorville, IL facility .
The Continuous Improvement Technician will collaborate closely with the manufacturing engineering, quality, and operations teams to enhance operational efficiency.
This will be achieved by analyzing workflows, identifying inefficiencies, and implementing strategic solutions designed to increase productivity and efficiency while minimizing waste.
This hands-on, cross-functional role serves as a vital link between shop-floor personnel and management, promoting problem-solving through methodologies such as Lean and Six Sigma.
Major accountabilities (include, but are not limited to):
* Floor Presence : Spend significant time on the shop floor auditing processes, observing machine operators, and conducting time studies.
* Kaizen Facilitation : Facilitate rapid improvement initiatives, also known as Kaizen events, aimed at redesigning workstations, enhancing machine changeover times, and optimizing material flow.
These initiatives should be guided by observations made on the production floor or identified by the operations team through the Kaizen Action Sheet database.
* Visual Management : Maintain and react to floor-level visual controls, including production board entries, establishing/maintaining shadow boards, maintaining the Kanban card systems, and other visual management systems for real-time problem solving.
* Work Instruction/SOP Development : Draft and systematically update comprehensive work instructions and standard operating procedures to incorporate recent process improvements, identify and rectify deficiencies within manufacturing processes, or address specific quality defects.
This involves analyzing current practices, gathering input from relevant stakeholders, and ensuring that all documentation reflects the latest operational standards and best practices.
* Material Flow Logistics : Conduct a comprehensive analysis and optimization of internal supply chains by utilizing tugger, forklift, water-spider, and point-of-use inventory routes.
* Ergonomic Design : Engage in collaboration with Taylorville EHS to establish and redesign assembly cells and tooling layouts with the objective of minimizing operator strain and mitigating the risk of repetitive motion injuries.
* Cross-Functional Liason : Engage in comprehensive coordination among the Quality, Manufacturing Engineering, Operations, and Maintenance teams to ensure that all process improvements are effectively aligned with established product specifications and production schedules.
This involves detailed communication and collaboration to identify and implement necessary process adjustments that enhance product quality and operational efficiency while adhering to timeline constraints.
* Kaizen Action Sheets : Conduct a thorough review, documentation, and prioritization of process improvement ...
....Read more...
Type: Permanent Location: Taylorville, US-IL
Salary / Rate: Not Specified
Posted: 2026-06-24 07:56:25
-
Description
As a Dental Hygiene Assistant, you will play a vital role in ensuring children have lifetime of beautiful smiles! If you have a heart for children, and enjoy working with a fun team of like-minded professionals dedicated to quality care, we would love to meet you! The Hygiene Assistant is responsible for assisting with all hygiene care including room set up and breakdown, charting, x-rays, patient education, and sterilization.
Schedule: Monday-Friday 7:30-4:30
Travel required: WA, HH, MP
Key Skills for this role include:
* Coronal Polishing Certificate and X-ray Certification are a plus
* Working knowledge and experience with dental digital charting
* Back office dental experience
* Excellent communication skills
* Ability to multi-task, take direction and be a flexible team player
* Our ideal candidate has attention to detail, is reliable, and seeks to grow professionally.
We take care of our valued Hygiene Assistants by offering:
* Paid Time Off
* Paid Holidays
* Medical, Dental and Vision benefits
* Health Savings Account, Flex Spending
* 401K
* Short and Long Term Disability Insurance
* Life Insurance
* Opportunities for Community Giving Back
....Read more...
Type: Permanent Location: Charleston, US-SC
Salary / Rate: Not Specified
Posted: 2026-06-24 07:56:24
-
At Johnson & Johnson,we believe health is everything.
Our strength in healthcare innovation empowers us to build aworld where complex diseases are prevented, treated, and cured,where treatments are smarter and less invasive, andsolutions are personal.Through our expertise in Innovative Medicine and MedTech, we are uniquely positioned to innovate across the full spectrum of healthcare solutions today to deliver the breakthroughs of tomorrow, and profoundly impact health for humanity.Learn more at https://www.jnj.com
Job Function:
MedTech Sales
Job Sub Function:
Clinical Sales - Hospital/Hospital Systems (Commission)
Job Category:
People Leader
All Job Posting Locations:
Wuhan, Hubei, China
Job Description:
Manages a team of individual contributors and/or Supervisors, and is accountable for conducting effective performance management.
Develops tactical and operational plans to achieve sales goals, and communicates plans to managers, supervisors, and individual contributors.
Partners with sales leadership to identify quota credit or pay discrepancies.
Ensures sales compliance to policy and programming and monitors business and compliance practices for all sales.
Develops effective customer acquisition and retention processes from identifying potential customers to maintaining positive relationships with existing customers.
Leads and participates in cross-functional groups to establish marketing campaigns, product direction, and productive solutions.
Responsible for managing operational aspects of their team (e.g., workflow, performance, and compliance), as well as ensuring achievement of team goals within established timelines and budgets.
Integrates Johnson & Johnson's Credo and Leadership Imperatives into team goals and decision making.
Job is eligible for sales incentive / sales commissions.
....Read more...
Type: Permanent Location: Wuhan, CN-42
Salary / Rate: Not Specified
Posted: 2026-06-24 07:56:18
-
At Johnson & Johnson,we believe health is everything.
Our strength in healthcare innovation empowers us to build aworld where complex diseases are prevented, treated, and cured,where treatments are smarter and less invasive, andsolutions are personal.Through our expertise in Innovative Medicine and MedTech, we are uniquely positioned to innovate across the full spectrum of healthcare solutions today to deliver the breakthroughs of tomorrow, and profoundly impact health for humanity.Learn more at https://www.jnj.com
Job Function:
R&D Operations
Job Sub Function:
Clinical Trial Support
Job Category:
Professional
All Job Posting Locations:
Madrid, Spain
Job Description:
Coordinates with team to support throughout the start-up, execution, and completion of clinical research studies, ensuring the safety and confidentiality of all study subjects.
Collects reports from site visits, investigational product assessments, and other relevant observations and identifies inconsistencies in support of continuous improvement efforts.
Assists in gathering data on the clinical trial environment and measures against key performance indicators.
Applies theoretical knowledge of clinical trials to design basic corrective and preventative actions designed to mitigate risks.
Under direct supervision, performs trial closeout and retrieval of trial materials to ensure trials are effectively concluded.
Escalates observed deficiencies and issues to clinical trial management and follows all issues through to resolution.
Understands and applies Johnson & Johnson's Credo and Leadership Imperatives in day-to-day interactions with team.
This job is salaried.
....Read more...
Type: Permanent Location: Madrid, ES-M
Salary / Rate: Not Specified
Posted: 2026-06-24 07:56:16
-
Real Estate Accounting Supervisor
Employment Type: Full Time Exempt
Location Onsite - Norfolk, Virginia Corporate Office
JOB SUMMARY : Responsible for the accounting functions related to various real estate portfolio including multi-family and commercial properties.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following but are not limited to the job specifications contained herein.
Additional duties or job functions that can be performed safely may be required as deemed necessary by Harbor Group Management Company.
* Review monthly accrual property financial statement packages including all relevant workpapers and bank reconciliations
* Ensure fixed asset transactions (acquisitions, capitalization, dispositions, transfers and depreciation) are properly recorded in the fixed asset system
* Reconcile mortgage and escrow balances
* Prepare and post monthly journal entries to the general ledger
* Reconcile monthly bank statements
* Maintain supporting schedules for general ledger balances
* Assist in preparing internal month-end, quarter-end, and year-end reporting
* Record activity for purchases, sales, and refinances
* Ensure mortgages are set up for new acquisitions and tracked for monthly payments
* Ensure portfolio-level mortgages are allocated accordingly and paid timely
* Set up new MRI entities and bank accounts
* Perform any other duties assigned by the supervisor
QUALIFICATIONS : To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
* Bachelor's degree in Accounting or an equivalent discipline
* CPA is highly preferred
* 3-6 years relevant work experience.
Public accounting experience preferred.
* Real estate background desired but not required
* Previous staff management experience
* Working knowledge of U.S.
Generally Accepted Accounting Principles (GAAP) and/or International Financial Reporting Standards (IFRS), a plus
* Strong organizational and communication skills and attention to detail
* Ability to work in a fast-paced environment and manage well through ambiguity and complexity
* Ability to prioritize, multi-task and work well under pressure
* Ability to balance time during busy annual reporting/ tax season
* Experience with Yardi and MRI a plus
#LI-KP1
WHAT WE OFFER:
* Competitive Salaries & Bonuses
* Medical, Dental & Vision Plans
* 401(k) Plan with Employer Matching Contributions
* Paid Time Off (PTO) & 10+ Paid Holidays
* Paid Parental Leave
* Paid Birthday Off (Multifamily)
* Flexible Spending Accounts
* Company-Paid Long-Term Disability
* Company-Paid Life Insurance
* Short-Term Disab...
....Read more...
Type: Permanent Location: Norfolk, US-VA
Salary / Rate: Not Specified
Posted: 2026-06-24 07:56:14
