-
Hiring Company Drivers - Drivers Average more than $100K plus! • Referral Bonus $3K per referral • Safety/Performance Bonus up to $4K Annually • Training is provided • Expense reimbursement • Sleeper Berth Pay • 401k with Company Match • Profit Sharing Program • Paid Time Off plus 10 Company Holidays • Medical/Dental/Vision Insurance Our Tank Truck Driver (Farmington, NM) provide safe and efficient loading, transporting and unloading of various energy products ( Crude Oil; Liquid Petroleum Gas; Refined Products ) as a sole operator/driver.
Job Responsibilities
* Perform all required duties associated with operating and delivering product including maintaining paperwork.
* Observe and comply with FMCSA regulations, federal, state, and local regulations at all times.
* Comply with Enterprise Transportation Company employee, operating, safety and environmental procedures and standards.
* Inspect trucks and trailers per DOT requirements (brakes, engine oil, water levels, lights, loading hoses, etc.).
* Load and unload product by lining up hoses and connections according to customer requirements.
Hoses may exceed twenty feet (20') in length, up to four inches (4") in diameter and weigh as much as 50-100 pounds per twenty (20) foot section.
* Communicate effectively with internal and external contacts to ensure the smooth and efficient execution of responsibilities, duties, and activities.
* Prepare paperwork requirements accurately, legibly, completely, and timely.
* Operate on-board computer equipment to record data.
* Maintain proper placards in compliance with shipping papers.
* Open, close, secure all outlets.
* Operate manual and hydraulic valves, pumps, and compressors.
* Operate vehicle controls and emergency equipment.
* Connect and disconnect trailer, adjust dollies as needed.
* Connect and disconnect trailer airlines and electrical connections.
* Operate in extreme weather conditions, in and out of tractor cab.
* Sit for extended periods of time up to 10 hours.
* Perform field measurements duties according to API standards
* Day and night shifts available in some areas.
The successful candidate will meet the following qualifications:
* A minimum of 2 years tractor-trailer experience OR 1 year tractor-trailer tanker experience is required.
* Must maintain a valid state driver's license.
* A current CDL License with Tanker and Hazmat endorsement is required.
* State LP license certification is preferred or the ability to acquire.
* The ability to read, write and understand English is required.
* The ability to make occasional overnight stays for certain trips is required.
* Must have the ability to perform vehicle inspections that require walking, bending, reaching, pushing, pulling, stooping, squatting, and climbing.
Enterprise Products Partners L.P.
is one of the largest publicly traded partnersh...
....Read more...
Type: Permanent Location: Farmington, US-NM
Salary / Rate: Not Specified
Posted: 2026-05-28 07:42:03
-
Enterprise Products Partners L.P.
is one of the largest publicly traded partnerships and a leading North American provider of midstream energy services to producers and consumers of natural gas, NGLs, crude oil, refined products and petrochemicals.
Our services include: natural gas gathering, treating, processing, transportation and storage; NGL transportation, fractionation, storage and import and export terminals; crude oil gathering, transportation, storage and terminals; petrochemical and refined products transportation, storage and terminals; and a marine transportation business that operates primarily on the United States inland and Intracoastal Waterway systems.
The partnership's assets include approximately 50,000 miles of pipelines; 260 million barrels of storage capacity for NGLs, crude oil, refined products and petrochemicals; and 14 billion cubic feet of natural gas storage capacity.
The Measurement Technician operates, repairs, tests, troubleshoots, adjusts and installs and maintains bench and on-line process gas equipment used in the Natural Gas Industry which may include Gas Chromatograph equipment.
Other responsibilities include, but are not limited to:
* Monitor and track UAF gas losses.
* Improve the reliability of the gas chromatographs currently in use at the plants and on the pipeline system.
* Perform mechanical functions and duties of inspecting, checking, troubleshooting, repairing, and replacing all mechanical equipment in order to maintain high levels of safe and productive equipment performance.
* Review procedures as necessary to achieve excellent performance.
* Ensure compliance of all Company and industry standards to meet the requirements of all regulatory agencies.
* Properly complete records of time and required regulatory reports.
* Maintain close contact with the supervisor regarding maintenance trouble reports and scheduled equipment maintenance affecting interruption of product throughput.
* Cross train to effectively develop skills in areas specific to other technicians.
* Attend all safety meetings and safety training courses as required by regulatory agencies.
The successful candidate will meet the following qualifications:
* A minimum of a high school diploma or G.E.D.
equivalent is required.
* An Associate's degree in a technical field, such as Chemistry, Gas Measurement, Electronics, etc., is preferred.
* A minimum of 3 years' work experience in the Natural Gas Industry is required.
* A basic to advanced level of knowledge in Gas Measurement is preferred.
* A valid driver's license with acceptable driving record is required.
* Ability to follow written or spoken work instructions; understand equipment repair manuals; and Federal, State and Local codes and regulations is required.
* The ability to perform basic mathematical calculations, such as, percentages, ratios and proportions to practical solutions is required.
...
....Read more...
Type: Permanent Location: Boulder, US-WY
Salary / Rate: Not Specified
Posted: 2026-05-28 07:42:02
-
Responsibilities
Position plans, directs and organizes all the activities to support the warehouse operations of the plant.
Consistently plans warehouse resources and activities to meet company objectives.
Responsible for the development of warehouse staff.
Develops process and systems to maintain inventory accuracy and generates all required reports.Qualifications
Education and Experience
* Bachelor's Degree in Supply Chain Management , Purchasing, Logistics, Engineering, Business, or related field; demonstrated professional warehousing experience can be considered in lieu of degree
* 6 or more years of experience in Warehousing, Supply Chain, Procurement, Materials Management, or related field
Additional Qualifications
* Personal Skills: Conflict Resolution, Time/Priority Management, Work on a Team, Reading/ Comprehension, Stress Management, Training/Mentoring Others, Self-Motivated, Organizational Skills, Analytical Skills.
* Experience with S4 Extended Warehouse Management in SAP is preferred.
* Strong written and verbal communication skills.
* Have a good understanding of SAP best practices
* Software Skills: Microsoft Excel, Word and Outlook, SAP
Competencies
* Each position at Avient focuses on eight Core Competencies as a Leader of Self.
Additionally, management positions focus on Leadership Competencies as a Leader of Others and/or a Leader of the Business.
These competencies are designed to drive behavior that will ultimately help our associates excel at their current roles, while supporting individual and career development.
Physical Demands
Requires standing and sitting for extended periods of time, talking and listening.
Must be able to walk and use hands.
Occasionally requires bending, stooping, climbing ladders and stairs.
May occasionally be required to lift, push or pull up to 50 pounds.
Typically work is in a manufacturing environment where the noise level is loud.
Generally, requires the use of personal protective equipment such as safety glasses, safety shoes, hearing protection, hard hat, and respiratory protection.
Exposure to outside weather conditions is routine.
May be exposed to working in extreme heat and humidity.
May also be exposed on occasion to dust, or fumes.
Requires working a flexible scheduleAbout Us
Our purpose at Avient Corporation is to be an innovator of materials solutions that help our customers succeed, while enabling a sustainable world.
Innovation goes far beyond materials science; it's powered by the passion, creativity, and diverse expertise of 9,000 professionals worldwide.
Whether you're a finance wizard, a tech enthusiast, an operational powerhouse, an HR changemaker, or a trailblazer in materials development, you'll find your place at Avient.
Join our global team and help shape the future with sustainable solutions that transform possibilities into realities.
Your unique perspective could be the key to our next breakthrough!
We believe that all...
....Read more...
Type: Permanent Location: Avon Lake, US-OH
Salary / Rate: Not Specified
Posted: 2026-05-28 07:42:00
-
Position Purpose:
Own the end-to-end coordination of the candidate experience, ensuring a seamless, consistent, and professional interview and hiring process.
This role enables recruiters to stay focused on hiring decisions by providing structured, service-oriented support across scheduling, communication, and systems, strengthening both efficiency and BAC’s employment brand.
Key Responsibilities:
* Coordinate interview scheduling, candidate communications, and logistics to deliver a smooth and professional experience.
* Prepare and distribute interview schedules and materials to ensure interviewer readiness.
* Serve as the primary point of contact for candidate logistics and communication throughout the hiring process.
* Maintain consistency and momentum across interview timelines and process steps.
* Support onboarding coordination to ensure a seamless transition from offer to start.
* Manage and maintain job postings across internal and external job boards, ensuring accuracy, branding alignment, and timely updates.
* Maintain recruitment systems and data accuracy, including ATS and tracking tools.
* Manage the Talent Acquisition SharePoint site, ensuring content and resources are current and accessible.
* Support employment branding initiatives, including job fairs, university partnerships, and social media recruiting efforts.
* Ensure recruiting activities align with employment laws, internal policies, and best practices.
* Adapt priorities and approaches to meet evolving hiring needs in a fast-paced environment.
Nature & Scope:
Reports to the Sr.
Talent Acquisition Specialist and supports the broader Talent Acquisition team. Partners closely with Human Resources, recruiters, hiring managers, and candidates across multiple functions and locations. Serves as the central coordination point for candidate logistics and interview execution. Operates independently in managing scheduling, communication, and process flow while aligning closely with recruiter direction. This role does not have direct reports.
Knowledge, Skills & Abilities
* Bachelor’s degree in Business administration, Human Resources, or related field preferred.
* 2–4 years of experience supporting recruiting or HR coordination, ideally in a manufacturing or industrial environment.
* Experience working with Applicant Tracking Systems (ATS) and recruitment tools required.
* Proficiency in Microsoft Office (Outlook, Excel, Word) and collaboration tools such as Teams and SharePoint.
* Strong organizational skills with the ability to manage multiple priorities and timelines.
* High attention to detail and commitment to data accuracy.
* Clear, professional communication skills with a strong customer-service focus.
* Ability to build strong working relationships with candidates, recruiters, and hiring managers.
* Maintains professionalism and confidentiality when ...
....Read more...
Type: Permanent Location: Jessup, US-MD
Salary / Rate: Not Specified
Posted: 2026-05-28 07:41:52
-
About CooperSurgical
CooperSurgical is a leading fertility and women's healthcare company dedicated to putting time on the side of women, babies, and families at the healthcare moments that matter most in life.
As a division of CooperCompanies, we're driven by a unified purpose to enable patients to experience life's beautiful moments.
Guided by our shared values - dedicated, innovative, friendly, partners, and do the right thing - our offerings support patients throughout their lifetimes, from contraception to fertility and birth solutions, to women's and family care, and beyond.
We currently offer over 600 clinically relevant medical devices to healthcare providers, including testing and treatment options, as well as an innovative suite of assisted reproductive technology and genomic testing solutions.
Learn more at www.coopersurgical.com.
This role is not eligible for employer-sponsored work authorization now or in the future.
Applicants must be authorized to work in the United States on a permanent and ongoing basis without the need for future sponsorship (i.e., H1B, STEM OPT extensions, TN, etc.)
Data Analyst CooperSurgical Inc.
Hybrid- Naperville, IL
....Read more...
Type: Permanent Location: San Ramon, US-CA
Salary / Rate: Not Specified
Posted: 2026-05-28 07:41:41
-
About CooperSurgical
CooperSurgical is a leading fertility and women's healthcare company dedicated to putting time on the side of women, babies, and families at the healthcare moments that matter most in life.
As a division of CooperCompanies, we're driven by a unified purpose to enable patients to experience life's beautiful moments.
Guided by our shared values - dedicated, innovative, friendly, partners, and do the right thing - our offerings support patients throughout their lifetimes, from contraception to fertility and birth solutions, to women's and family care, and beyond.
We currently offer over 600 clinically relevant medical devices to healthcare providers, including testing and treatment options, as well as an innovative suite of assisted reproductive technology and genomic testing solutions.
Learn more at www.coopersurgical.com .
Work location: North Tonawanda, NY (on-site)
Scope:
* This position supports the assembly and production of medical devices in compliance with FDA, GMP, and ISO 13485 standards.
The assembler ensures all components are built and documented according to company quality and safety requirements.
Job Summary:
* Basic, repetitive assembly tasks under close supervision.
* Follow the product method sheet to understand the manufacturing process.
* Use hand tools, fixtures, or simple machinery as specified in the method sheet.
* Performs visual inspections for obvious defects.
* Requires minimal technical knowledge.
* Typically, it needs 0-2 years of experience.
About CooperSurgical CooperSurgical is a leading fertility and women's healthcare company dedicated to putting time on the side of women, babies, and families at the healthcare moments that matter most in life.
As a division of CooperCompanies, we're driven by a unified purpose to enable patients to experience life's beautiful moments.
Guided by our shared values - dedicated, innovative, friendly, partners, and do the right thing - our offerings support patients throughout their lifetimes, from contraception to fertility and birth solutions, to women's and family care, and beyond.
We currently offer over 600 clinically relevant medical devices to healthcare providers, including testing and treatment options, as well as an innovative suite of assisted reproductive technology and genomic testing solutions.
Learn more at www.coopersurgical.com.
Work location: North Tonawanda, NY (on-site)
....Read more...
Type: Permanent Location: North Tonawanda, US-NY
Salary / Rate: Not Specified
Posted: 2026-05-28 07:41:41
-
JOIN OUR TEAM IN BONN FOR A FULL-TIME UNLIMITED POSITION, STARTING as soon as possible as
Implementation Lead
The "Finance Systems Transformation" department oversees the “SHAPE+ Program”, a cross-divisional Finance ERP Platform transformation initiative reporting to the CFO of the DHL Group.
The program aims to enhance the standardization, automation, and user experience of the core accounting including master data management and cost accounting processes.
The goal is to establish an efficient, & innovative Finance ERP platform that enables capabilities such as continuous accounting, real-time data processing, and advanced analytics.
As Implementation Lead, what are your tasks and how can you be a differentiating success factor for our team?
Our Implementation Leads are end-to-end responsible for coordinating the delivery of platform requirements across multiple finance process domains.
This role ensures that the configuration and extension of the Platforms are delivered efficiently, aligned with architectural principles, and accordingly to the broader program priorities.
The Implementation Lead operates at the intersection of processes & platform enabling cross-functional teams to translate business requirements into technical execution.
YOUR TASKS
Delivery Coordination
* Coordinate daily activities across development and architecture teams to ensure timely resolution of implementation blockers.
* Align implementation activities with release timelines and program milestones, supporting readiness for production deployment.
Cross-Functional Alignment
* Facilitate communication between technical and functional teams to bridge gaps in understanding and execution.
* Participate in workshops and working sessions to align on requirements, solution design, and delivery expectations.
Sprint & Release Management
* Facilitate sprint planning and backlog prioritization in collaboration with platform and process stakeholders.
* Monitor progress against delivery objectives, escalating risks and dependencies to program leadership as needed.
Technical Integration Support
* Collaborate with integration teams to ensure interface designs are executable and aligned with platform standards.
* Coordinate with external and internal teams to validate integration scenarios and resolve technical challenges.
Partner & Vendor Coordination
* Engage with external solution providers to align on delivery timelines, technical dependencies, and integration readiness.
* Support joint implementation efforts with third-party platforms, ensuring smooth handover and testing coordination.
Enablement & Team Support
* Provide onboarding and guidance to new team members involved in implementation activities.
* Foster a culture of continuous improvement and shared accountability across implementation teams.
YOUR PROFILE
* Experience in SAP S/4HANA implementa...
....Read more...
Type: Permanent Location: Bonn, DE-NW
Salary / Rate: Not Specified
Posted: 2026-05-28 07:41:40
-
Urban has an exciting opportunity for a Bridge Design Engineer to work on transportation design projects located throughout the State of New Jersey and Pennsylvania.
This opportunity would be based out of our Mount Laurel, NJ office and would offer both flexible hours and hybrid options.
As Urban is celebrating our 65th year in operation, this is a great opportunity join a dedicated team of bridge design professionals and work on challenging projects that renew the state's critical infrastructure.
About the Role:
The primary duties for this role are to perform structural analysis and prepare design calculations for various transportation structures (e.g., bridges, culverts, retaining walls, etc.) in accordance with AASHTO LRFD, NJDOT, NJTA, PennDOT, and other specifications and standards.
Collaborating closely with other talented transportation professionals within our engineering staff, you will be a key team member involved in the growth of our people and projects in our NJ office.
RESPONSIBILITIES
* Designing steel and prestressed concrete superstructure elements, concrete deck slabs, abutments, piers, and foundations.
* Developing detailed manual design calculations using spreadsheets or hand calculations.
* Ability to work on multiple tasks or projects concurrently and a proactive collaborative approach to project development.
* Apply a diversified knowledge of bridge engineering principles and practices in broad areas related to superstructure design, substructure design, geotechnical and foundation design, and retaining and noise walls.
REQUIREMENTS
* Bachelor's of Science in Civil Engineering (MS preferred).
* EIT or New Jersey PE preferred and a minimum of 4 years of experience working on NJDOT, NJTA, and/or County bridge transportation projects.
* Ideal candidate should have strong oral and written communication skills and a desire to work in a team environment.
* Candidate must be familiar with structural design and analysis software (e.g., PennDOT design software, OpenBridge Modeler, STAAD, RISA, MIDAS, VBent, ProStructures, etc.).
* Experience in load ratings and bridge rehabilitation is preferred.
* Proficiency in MicroStation and/or AutoCAD is preferred.
* Occasional travel may be required.
* Proficient in MS Office (Word, Excel and PowerPoint).
* Bridge inspection experience is preferred, and NBIS certification is a plus.
COMPENSATION
The approximate compensation range is dependent upon factors such as education, qualifications, experience, skillset, and physical work location.
Pay Rate: $95,000 - $120,000 / year
BENEFITS
Urban Engineers offers a comprehensive benefits package including:
* Medical, dental, vision, and prescription insurance
* 401k Retirement Plan and company match
* Life, AD&D, short-term, long-term disability
* Flexible Spending Account (FSA)
* Health Savings Account (HSA)
* Employee Stock Ownership Plan (ES...
....Read more...
Type: Permanent Location: Mount Laurel, US-NJ
Salary / Rate: 95000
Posted: 2026-05-28 07:41:29
-
Reporting to the VP of Operational Excellence, the Project Controls Specialist is responsible for providing hands-on project services, implementation, and delivery, including but not limited to cost and/or planning functions across projects.
The role reports on project analytics related to KPIs at both the project and business levels and contributes to the design, development, and implementation of project controls, tools, and processes that add value to stakeholders.
ESSENTIAL DUTIES
* Provide subject-matter expertise to project teams on reporting tools & dashboards
* Assist in monitoring project health & performance; ensure key performance metrics are understood
* Support Project Managers in budgeting, change management, forecasting, and reporting
* Support the implementation of an Earned Value Management system to measure project performance, identify variances, and inform accurate forecasting
* Prepare reports of Profit & Loss
* Establish invoicing milestones as required for each project, tracking progress and billing forecasts
* Support PMs in developing and maintaining project plans
* Mentor personnel in Earned Value methodologies
* Assist in maintaining and improving the cost management systems
* Participate in internal management project status meetings
* Provide Resource Utilization metrics
* Assist PMs with monthly forecasts of project revenue, margin, cost and completion milestones
* Support risk management activities
* Assist Project Managers in the logging, tracking, mitigation of risk, and development of approved change orders
* Collaborate on early identification & assessment of critical project issues and risks, and suggested corrective actions
* Other duties as assigned
Competencies you possess:
* Attention to detail
* Service Excellence
* Results, Action Oriented
* Accountability and responsibility
* Teamwork and collaboration
* Decision Quality
* Problem solving
* Self-starter, self-motivation
EXPERIENCE & QUALIFICATIONS
* Work Experience: 7 years' experience in a project specialist or similar role
* Education: Bachelor's degree in engineering, accounting, business, or related field, or equivalent experience
* Analytics/Computer Skills: Advanced Microsoft Office Skills; basic understanding of project accounting principles and processes
* Drive data-driven decision-making - integrating project controls data with business intelligence tools (e.g., dashboards, trend analysis, and predictive analytics) to provide actionable insights
* Participate in continuous improvement initiatives - Evaluating existing project controls processes, identifying inefficiencies, and recommend best practices to enhance accuracy, scalability, and overall project delivery performance.
* Organization Skills: Highly organized and detail-oriented; ability to multi-task and shift priorities as needed; ab...
....Read more...
Type: Permanent Location: Philadelphia, US-PA
Salary / Rate: Not Specified
Posted: 2026-05-28 07:41:28
-
Join the growing ENT team as a Washington State Credentialed Medical Assistant-Certified!
Hiring rate: generally between $22.25-$27.40 per hour and placement in the range depends on an evaluation of experience.
Location: Gateway Two (2621 NE 134th Street - Vancouver, WA 98686) - with flexibility to cover other locations as needed
Schedule: Monday through Friday - either 4x10 hour days (day off TBD) or 4x9 hour days + 1x4 hour days.
Responsibilities include rooming patients, collecting patient information, preparing patients for examinations, assisting with procedures, and assisting with overall delivery of patient care.
To be successful in this role you must be able to work well with others as part of a cohesive team and be able to maintain a positive attitude while working in a fast-paced environment.
Requirements:
* Graduate of an accredited Medical Assistant program.
* Certification from national certifying entity (AAMA, NCCT, AMT, NHA, etc.)
* Current Washington State Medical Assistant-Certified credential required, or ability to obtain within 6 months of hire.
* Current healthcare provider BLS required.
Additional Information: Vancouver Clinic provides care across a wide range of medical decisions.
This includes care and opinions on vaccinations, reproductive health, end-of-life decision-making, and gender affirming treatment.
The ability to work, with or without reasonable accommodation, with a diverse population of patients and colleagues seeking or considering care in all areas, is an essential function of all positions at the Clinic.
Pay Range:
$21.81 - $30.53
The above information is intended to indicate the general nature and level of work required in this position.
It is not designed to contain or be interpreted as a comprehensive description of all duties, responsibilities, and qualifications required of those assigned to this job.
We offer a competitive Total Rewards Program.
Eligibility for benefits is dependent on factors such as position type and FTE.
Benefit-eligible employees qualify for benefits beginning on the first of the month following one month of employment.
Vancouver Clinic offers medical, dental, vision, life insurance, AD&D, long term disability, health savings account, flexible spending account, employee assistance program, and multiple supplemental benefits (voluntary life, critical illness, accident, hospital indemnity, identity theft protection, legal services, etc.).
We also offer a 401k retirement plan, along with an employer matching contribution up to 4%.
Compensation packages and time off programs vary and are dependent on factors such as department, position type, primary work state and FTE.
Contact your Recruiter for full information.
Vancouver Clinic is proud to be an Equal Opportunity Employer.
Vancouver Clinic does not discriminate on the basis of race, color, gender, disability, veteran, military status, religion, age, creed, national origin, gender identity or expressi...
....Read more...
Type: Permanent Location: Vancouver, US-WA
Salary / Rate: Not Specified
Posted: 2026-05-28 07:41:04
-
Howmet Aerospace Inc.
(NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries.
Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels.
With $8.3 Billion in revenue in 2025, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world.
To learn more about the way Howmet Aerospace Inc.
is advancing the sustainability of our customers, markets, and communities where we operate, review the 2025 Environmental Social and Governance report at www.howmet.com/esg-report .
Follow: LinkedIn , Twitter , Instagram , Facebook , and YouTube .
Equal Opportunity Employer:
Howmet is proud to be an Equal Employment Opportunity employer.
We are committed to creating an inclusive environment for all employees.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics.
If you need assistance to complete your application due to a disability, please email TalentAcquisitionCoE_Howmet@howmet.comBasic Qualifications:
Education:
* Certification in mechanical, electrical, or apprenticeship preferred.
* Associates or Bachelors degree in mechatronics preferred.
Skills and Abilities :
* Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.
* Ability to read and interpret electrical, mechanical, hydraulic, and pneumatic drawings.
* Ability to write routine reports and correspondence.
* Ability to speak effectively before groups of customers or employees of organization.
* Ability to define problems, collect data, establish facts, and draw valid conclusions.
* Ability to interpret an extensive variety of technical instructions in mathematical or diagram form.
Experience :
* This position requires a minimum of five years related experience in a maintenance role.
* This position requires a minimum of two years of related experience in an industrial manufacturing environment.
* Employee must be legally authorized to work in the United States.
Verification of employment eligibility will be required at the time of hire.
Visa sponsorship is not available for this position.
* This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items.
Preferred Qualifications (For this position to be successful):
* 24/7 operations manufacturing experience preferred.
* Experience with vacuum casting furnaces, injection press machines, and/or Fanuc & Motoman robotic systems i...
....Read more...
Type: Permanent Location: Hampton, US-VA
Salary / Rate: Not Specified
Posted: 2026-05-28 07:41:03
-
Howmet Aerospace Inc.
(NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries.
Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels.
With $8.3 Billion in revenue in 2025, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world.
To learn more about the way Howmet Aerospace Inc.
is advancing the sustainability of our customers, markets, and communities where we operate, review the 2025 Environmental Social and Governance report at www.howmet.com/esg-report .
Follow: LinkedIn , Twitter , Instagram , Facebook , and YouTube .
Equal Opportunity Employer:
Howmet is proud to be an Equal Employment Opportunity employer.
We are committed to creating an inclusive environment for all employees.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics.
If you need assistance to complete your application due to a disability, please email TalentAcquisitionCoE_Howmet@howmet.comBASIC REQUIREMENTS:
* High school diploma or GED from an accredited institution
* Minimum of one year experience performing quality/inspection tasks in a manufacturing environment.
* Employees must be legally authorized to work in the United States.
Verification of employment eligibility will be required at the time of hire.
Visa sponsorship is not available for this position.
PREFERRED QUALIFICATIONS:
* Previous experience as Quality Technician, Inspector, or Quality Auditor in a manufacturing environment.
* PC experience as well as Microsoft Office Suite.
* Familiarity with blueprints.
This QUALITY TECHNICIAN will be located in our new core facility in Whitehall, MI.
Key responsibilities: Collect product data for analysis in support of continuous improvement.
Validate quality system compliance and perform audits.
Collect and prepare statistical data reports.
Interpret specifications and blueprints.
Conduct operator training.
Comply with all EHS rules required for the work environment.
Perform other duties as assigned.
A Quality Technician is required to successfully complete a training program to achieve customer certification.
....Read more...
Type: Permanent Location: Whitehall, US-MI
Salary / Rate: Not Specified
Posted: 2026-05-28 07:41:03
-
Howmet Aerospace Inc.
(NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries.
Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels.
With $8.3 Billion in revenue in 2025, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world.
To learn more about the way Howmet Aerospace Inc.
is advancing the sustainability of our customers, markets, and communities where we operate, review the 2025 Environmental Social and Governance report at www.howmet.com/esg-report .
Follow: LinkedIn , Twitter , Instagram , Facebook , and YouTube .
Equal Opportunity Employer:
Howmet is proud to be an Equal Employment Opportunity employer.
We are committed to creating an inclusive environment for all employees.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics.
If you need assistance to complete your application due to a disability, please email TalentAcquisitionCoE_Howmet@howmet.comRequired Qualifications:
* High school diploma or equivalent
* Experience with 84D Siemens Control Panel
* Three years' experience as a Machinist in a manufacturing or production environment
* Employees must be legally authorized to work in the United States.
Verification of employment eligibility will be required at the time of hire.
Visa sponsorship is not available for this position
Preferred Qualifications:
* Technical or trade school training certificate and two years' experience, OR, six years' experience.
* Experience with 3,4, or 5 axis milling, turning or grinding.
* Experience with other Siemens and Fanuc controls
* Experience setting up and operating machine tools.
* Intermediate ability to read and interpret assembly drawings and specifications.
* Proficiency with precision measurement tools (CMM, height gage, micrometers, indicators, etc.)
* Effective written and verbal communication skills.
* Strong interpersonal and teamwork skills.
* Strong attention to detail and commitment to quality.
* Proficient PC skills in a Windows environment.
* Demonstrated problem-solving ability in a machine shop environment.
* Experience using an ERP system.
About Us
 Howmet Aerospace Inc.
(NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries.
Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels.
With $8.3 Billion in revenue in 2025,...
....Read more...
Type: Permanent Location: New Brighton, US-MN
Salary / Rate: Not Specified
Posted: 2026-05-28 07:41:02
-
Howmet Aerospace Inc.
(NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries.
Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels.
With $8.3 Billion in revenue in 2025, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world.
To learn more about the way Howmet Aerospace Inc.
is advancing the sustainability of our customers, markets, and communities where we operate, review the 2025 Environmental Social and Governance report at www.howmet.com/esg-report .
Follow: LinkedIn , Twitter , Instagram , Facebook , and YouTube .
Equal Opportunity Employer:
Howmet is proud to be an Equal Employment Opportunity employer.
We are committed to creating an inclusive environment for all employees.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics.
If you need assistance to complete your application due to a disability, please email TalentAcquisitionCoE_Howmet@howmet.com Basic Qualifications:
* High School Diploma or GED from an accredited institution.
* A minimum of 3 years' experience working in a manufacturing environment
* Employee must be legally authorized to work in the United States.
Verification of employment eligibility will be required at the time of hire.
Visa sponsorship is not available for this position.
* This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items.
Preferred Qualifications:
* Associate degree from two-year college or technical school preferred.
Howmet Aerospace, headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries.
The Company's primary businesses focus on jet engine components, aerospace fastening systems and titanium structural parts necessary for mission-critical performance and efficiency in aerospace and defense applications, as well as forged wheels for commercial transportation.
Howmet Aerospace is transforming the next phase of more fuel-efficient, quieter aerospace engines and sustainable ground transportation.
For more information, visit www.howmet.com .
Follow @howmet: Twitter , Instagram , Facebook , LinkedIn and YouTube .
Howmet has challenging opportunities for individuals who are excited to engage with us in growing our business.
Join us where you will be part of a dedicated team to manufacture high tech products, safely, accurately, and efficiently, you will perform a variety of hands-on...
....Read more...
Type: Permanent Location: Hampton, US-VA
Salary / Rate: Not Specified
Posted: 2026-05-28 07:41:02
-
Howmet Aerospace Inc.
(NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries.
Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels.
With $8.3 Billion in revenue in 2025, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world.
To learn more about the way Howmet Aerospace Inc.
is advancing the sustainability of our customers, markets, and communities where we operate, review the 2025 Environmental Social and Governance report at www.howmet.com/esg-report .
Follow: LinkedIn , Twitter , Instagram , Facebook , and YouTube .
Equal Opportunity Employer:
Howmet is proud to be an Equal Employment Opportunity employer.
We are committed to creating an inclusive environment for all employees.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics.
If you need assistance to complete your application due to a disability, please email TalentAcquisitionCoE_Howmet@howmet.comBasic Qualifications
* Bachelor's degree in Business Administration, Marketing, Engineering, Supply Chain, or a related field.
* Minimum of 5 years of sales, account management, or business development experience within manufacturing, metals, aerospace, or industrial markets.
* Experience within the titanium, specialty metals, or commodity metals industry preferred.
* Strong commercial acumen with demonstrated success managing strategic customer relationships.
* Proven negotiation, communication, and problem-solving skills in fast-paced and changing market environments.
* Ability to develop productive business relationships that support long-term growth and profitability.
* Comfortable interacting with senior leadership and decision-makers within large organizations.
* Highly organized with strong follow-through and project management skills.
* Proficient in Microsoft Office Suite and CRM/business systems.
* Ability to travel as required to support customer and business needs.
The Account Manager is responsible for developing and managing strategic customer relationships while driving revenue growth across the Ti-Mill segment of Howmet Aerospace .
This role will support commodity-oriented titanium products and related value-added solutions within the aerospace, defense and industrial markets.
The Account Manager will work closely with internal commercial, operations, quality, and supply chain teams to develop and execute customer growth strategies aligned with the Ti-Mill segment's strategic objectives.
This position is remote and preferably l...
....Read more...
Type: Permanent Location: Niles, US-OH
Salary / Rate: Not Specified
Posted: 2026-05-28 07:41:01
-
Howmet Aerospace Inc.
(NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries.
Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels.
With $8.3 Billion in revenue in 2025, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world.
To learn more about the way Howmet Aerospace Inc.
is advancing the sustainability of our customers, markets, and communities where we operate, review the 2025 Environmental Social and Governance report at www.howmet.com/esg-report .
Follow: LinkedIn , Twitter , Instagram , Facebook , and YouTube .
Equal Opportunity Employer:
Howmet is proud to be an Equal Employment Opportunity employer.
We are committed to creating an inclusive environment for all employees.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics.
If you need assistance to complete your application due to a disability, please email TalentAcquisitionCoE_Howmet@howmet.comBASIC QUALIFICATIONS
* This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items.
* Employees must be legally authorized to work in the United States.
Verification of employment eligibility will be required at the time of hire.
Visa sponsorship is not available for this position.
* No relocation benefit is offered for this position.
Candidates residing within a 50 mile radius of Dover NJ will only be considered.
* Must have High school diploma or GED equivalent.
* Must pass visual eye exam and alloy verification certification.
* Participates in problem solving efforts
PREFFERED QUALIFICATIONS
* Able to perform repeated lifting.
* Able to read, write, speak, and understand English.
* Flexibility to work in many different jobs
PHYSICAL DEMANDS / EQUIPMENT USED
* Alloy verification equipment.
* Computers
* cut-off/Grind equipment.( Manual and Auto )
* Shell removal equipment ( Pneumatic, hammer Knock out and Blast )
* KOH Soak and Rinse Tanks
* Frequent Standing, Walking and lifting of up to 25 pounds.
* Manufacturing environment (hot, cold, etc.)
* Use of blast machines, grinding machines, hand tools and other manufacturing equipment
* Must be able to use hoists
Disclaimer
The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification.
They are not to be construed as an exhaustive list of all responsibilities, duties, and skill...
....Read more...
Type: Permanent Location: Dover, US-NJ
Salary / Rate: Not Specified
Posted: 2026-05-28 07:41:00
-
Howmet Aerospace Inc.
(NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries.
Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels.
With $8.3 Billion in revenue in 2025, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world.
To learn more about the way Howmet Aerospace Inc.
is advancing the sustainability of our customers, markets, and communities where we operate, review the 2025 Environmental Social and Governance report at www.howmet.com/esg-report .
Follow: LinkedIn , Twitter , Instagram , Facebook , and YouTube .
Equal Opportunity Employer:
Howmet is proud to be an Equal Employment Opportunity employer.
We are committed to creating an inclusive environment for all employees.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics.
If you need assistance to complete your application due to a disability, please email TalentAcquisitionCoE_Howmet@howmet.comMinimum Qualifications
* This position requires a minimum of a High School Diploma or GED equivalent.
* Employees must be legally authorized to work in the United States.
Verification of employment eligibility will be required at the time of hire.
Visa sponsorship is not available for this position.
* This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S.
person status.
ITAR defines U.S.
person as an U.S.
Citizen, U.S.
Permanent Resident (i.e.
'Green Card Holder'), Political Asylee, or Refugee.
Verification of employment eligibility will be required at the time of hire.
Preferred Qualifications
* 1-3 Years of manufacturing experience highly desired.
* Experience in a quality-related or inspection position.
Skills & Abilities:
Must be able to read and comprehend simple instructions, short correspondence, and memos.
Ability to write simple correspondence or documentation.
Good math skills with the ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
Ability to apply commonsense understanding to carry out detailed but uninvolved written or oral instructions.
Ability to deal with problems involving a few concrete variables in standardized situations.
Good organizational skills in maintaining a variety of records and reports.
Work Environment:
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.
Reasonable accommodations may be made to enable individ...
....Read more...
Type: Permanent Location: Branford, US-CT
Salary / Rate: Not Specified
Posted: 2026-05-28 07:41:00
-
Howmet Aerospace Inc.
(NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries.
Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels.
With $8.3 Billion in revenue in 2025, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world.
To learn more about the way Howmet Aerospace Inc.
is advancing the sustainability of our customers, markets, and communities where we operate, review the 2025 Environmental Social and Governance report at www.howmet.com/esg-report .
Follow: LinkedIn , Twitter , Instagram , Facebook , and YouTube .
Equal Opportunity Employer:
Howmet is proud to be an Equal Employment Opportunity employer.
We are committed to creating an inclusive environment for all employees.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics.
If you need assistance to complete your application due to a disability, please email TalentAcquisitionCoE_Howmet@howmet.com Basic Qualifications:
* High school diploma or GED from an accredited institution
* 7 years experience in leadership roles within a manufacturing environment; 3 of the 7 years must be as a supervisor in a manufacturing environment
* Employees must be legally authorized to work in the United States.
Verification of employment eligibility will be required at the time of hire.
Visa sponsorship is not available for this position.
Preferred Qualifications:
* BA/BS in Business Administration or Engineering from an accredited institution
* Experience in the investment casting industry a plus
* Strong leadership skills that create an engaged employee environment
* Able to drive improvement through the implementation of the lean manufacturing principles, total quality practices, six sigma
* A strong technical understanding of manufacturing processes.
* Strong analytical, problem solving, communication, interpersonal, organizational and negotiation skills
* Strong financial literacy
* Experience with tooling, molds and dies relating to the Investment Casting, Injection Molding, or Stamping Industries is preferred
The Manufacturing Manager is responsible for providing leadership in manufacturing excellence, ensuring customer satisfaction and continuous improvement of plant performance measurements (quality, productivity, cycle time, delivery and cash flow).
This position provides direction for hourly and manufacturing support employees.
Job Responsibilities
* Follow Safety Regulations along with all department specific safety requirements
...
....Read more...
Type: Permanent Location: Whitehall, US-MI
Salary / Rate: Not Specified
Posted: 2026-05-28 07:40:59
-
Howmet Aerospace Inc.
(NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries.
Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels.
With $8.3 Billion in revenue in 2025, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world.
To learn more about the way Howmet Aerospace Inc.
is advancing the sustainability of our customers, markets, and communities where we operate, review the 2025 Environmental Social and Governance report at www.howmet.com/esg-report .
Follow: LinkedIn , Twitter , Instagram , Facebook , and YouTube .
Equal Opportunity Employer:
Howmet is proud to be an Equal Employment Opportunity employer.
We are committed to creating an inclusive environment for all employees.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics.
If you need assistance to complete your application due to a disability, please email TalentAcquisitionCoE_Howmet@howmet.com Basic Qualifications:
* An application must include a resume and two professional references for review and consideration.
* This position requires a minimum of a high school diploma or general education degree (GED).
* Applicants must have at least two years of continuous experience or training.
Recent high school or college graduates without prior work experience must provide a letter of recommendation.
* Availability for all shifts (including 2nd shift, 3rd shift, and weekend shift) is necessary.
The ability to work overtime and weekends is required as schedules may vary based on operational needs; flexibility is essential.
* Employees must be legally authorized to work in the United States.
Verification of employment eligibility will be required at the time of hire.
Visa sponsorship is not available for this position.
* This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items.
This opening is with Howmet Aerospace - a world leader in investment casting of superalloys, aluminum and titanium primarily for jet aircraft and industrial gas turbine markets.
For more information about Howmet Aerospace, visit us online at www.howmet.com .
Howmet has challenging opportunities for individuals who are excited to engage with us in growing our business.
Join us where you will be part of a dedicated team to manufacture high tech products, safely, accurately, and efficiently, you will perform a variety of hands-on operations in accordance with standardized processes with...
....Read more...
Type: Permanent Location: Hampton, US-VA
Salary / Rate: Not Specified
Posted: 2026-05-28 07:40:58
-
Howmet Aerospace Inc.
(NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries.
Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels.
With $8.3 Billion in revenue in 2025, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world.
To learn more about the way Howmet Aerospace Inc.
is advancing the sustainability of our customers, markets, and communities where we operate, review the 2025 Environmental Social and Governance report at www.howmet.com/esg-report .
Follow: LinkedIn , Twitter , Instagram , Facebook , and YouTube .
Equal Opportunity Employer:
Howmet is proud to be an Equal Employment Opportunity employer.
We are committed to creating an inclusive environment for all employees.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics.
If you need assistance to complete your application due to a disability, please email TalentAcquisitionCoE_Howmet@howmet.comBASIC QUALIFICATIONS
* Employees must be legally authorized to work in the United States.
Verification of employment eligibility will be required at the time of hire.
Visa sponsorship is not available for this position.
* This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items.
* No relocation benefit is offered for this position.
Candidates residing within a 50 miles radius of Dover NJ will only be considered.
* High School Diploma or GED from an accredited institution.
PREFERRED QUALIFICATIONS
* Must be able to read and interpret and follow instructions and write and speak English.
Howmet Engines is a world-class producer of aero engine and industrial gas turbine components, including airfoils, rings, disks and forgings.
We excel in vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts that enable the next generation of quieter, more fuel-efficient aero engines and cleaner power generation.
Howmet Dover Casting is a world-class supplier of complex, investment-cast turbine airfoils and other components for the aircraft engine and industrial gas turbine industries.
Howmet Dover Alloy is a world-class supplier of vacuum and air-melted nickel- and cobalt-based superalloys to aerospace, gas turbine, medical and other high-technology industrial markets.
Howmet Aerospace is currently looking a Foundry Worker to join our Howmet Casting located in Dover, New Jersey.
The work hours for this Midnight Shift are Sun...
....Read more...
Type: Permanent Location: Dover, US-NJ
Salary / Rate: Not Specified
Posted: 2026-05-28 07:40:57
-
Basic Qualifications:
* Minimum 1 year experience required as a machinist
* Employee must be legally authorized to work in the United States.
Verification of employment eligibility will be required at the time of hire.
Visa sponsorship is not available for this position.
* This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items
Preferred Qualifications:
* High school diploma or general education degree (GED) preferred
Benefits/Salary:
The position includes competitive wages and a comprehensive benefits package, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation.
The salary range for this position is $21hr to $25hrHowmet Fastening Systems (HFS) is seeking a 1st Shift, Machining Tech II, Fillet Roll for our City of Industry, California location.
Howmet Aerospace Inc.
(NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries.
Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels.
With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world.
To learn more about the way Howmet Aerospace Inc.
is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at www.howmet.com/esg-report .
Follow: LinkedIn , Twitter , Instagram , Facebook , and YouTube .
Born from many well-known and long-standing brands, Howmet Fastening Systems, headquartered in Torrance, California, is the premier designer and manufacturer of aerospace and industrial fasteners, latches, fluid fittings and installation tools.
Our products are used nose to tail on commercial and military aircraft, as well as on jet engines, industrial gas turbines, automobiles, commercial transportation vehicles, wind turbines, solar power systems, and construction and industrial equipment.
Essential Duties and Responsibilities include the following.
Other duties may be assigned.
• Good communication skills & knowledge of basic shop math
• Able to read, write and understand basic instructions in English
• Ability to write routine reports and correspondence
• Able to lift/move up to 30 pounds regularly
• Able to learn how to use measurement instruments
• Ability to follow direction
• Ability to complete first piece verification
• Maintain a good attitude and be willing to learn
• Communicates effectively with other team members and Production Team Leader
• Be familiar with Human Performance tasks
• Able to perform entry level set-ups
• Understand the speeds and feeds pertaining to the m...
....Read more...
Type: Permanent Location: City of Industry, US-CA
Salary / Rate: Not Specified
Posted: 2026-05-28 07:40:57
-
Basic Qualifications:
* 3 years of CNC experience required
* Employee must be legally authorized to work in the United States.
Verification of employment eligibility will be required at the time of hire.
Visa sponsorship is not available for this position.
* This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items
Preferred Qualifications:
* High school diploma or general education degree (GED) preferred
* CNC Certificate preferred
Benefits/Salary:
The position includes competitive wages and a comprehensive benefits package, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation.
The salary range for this position is $22hr to $27hrHowmet Fastening Systems (HFS) is seeking a 2nd Shift, CNC Operator II for our City of Industry, California location.
Howmet Aerospace Inc.
(NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries.
Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels.
With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world.
To learn more about the way Howmet Aerospace Inc.
is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at www.howmet.com/esg-report .
Follow: LinkedIn , Twitter , Instagram , Facebook , and YouTube .
Born from many well-known and long-standing brands, Howmet Fastening Systems, headquartered in Torrance, California, is the premier designer and manufacturer of aerospace and industrial fasteners, latches, fluid fittings and installation tools.
Our products are used nose to tail on commercial and military aircraft, as well as on jet engines, industrial gas turbines, automobiles, commercial transportation vehicles, wind turbines, solar power systems, and construction and industrial equipment.
Essential Duties and Responsibilities include the following.
Other duties may be assigned.
⢠Good communication skills & knowledge of basic shop math
⢠Able to read, write and understand basic instructions in English
⢠Ability to write routine reports and correspondence
⢠Able to lift/move up to 30 pounds regularly
⢠Able to learn how to use measurement instruments
⢠Ability to follow direction
⢠Ability to complete first piece verification
⢠Maintain a good attitude and be willing to learn
⢠Communicates effectively with other team members and Production Team Leader
⢠Ability to become certified in lock out/tag out
⢠Be familiar with Human Performance tasks
⢠Able to perform entry level set-ups
â...
....Read more...
Type: Permanent Location: City of Industry, US-CA
Salary / Rate: Not Specified
Posted: 2026-05-28 07:40:55
-
Howmet Aerospace Inc.
(NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries.
Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels.
With $8.3 Billion in revenue in 2025, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world.
To learn more about the way Howmet Aerospace Inc.
is advancing the sustainability of our customers, markets, and communities where we operate, review the 2025 Environmental Social and Governance report at www.howmet.com/esg-report .
Follow: LinkedIn , Twitter , Instagram , Facebook , and YouTube .
Equal Opportunity Employer:
Howmet is proud to be an Equal Employment Opportunity employer.
We are committed to creating an inclusive environment for all employees.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics.
If you need assistance to complete your application due to a disability, please email TalentAcquisitionCoE_Howmet@howmet.comTo perform this job successfully, the incumbent(s) must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
* High School Diploma or equivalent GED
* Basic math skills to include the ability to add, subtract, divide and calculate percentages
* Knowledge of basic measuring tools, calipers, micrometers, comparators and math required
* Understanding of GD&T with ability to read and interpret drawing requirements
* Basic blueprint reading
* Employees must be legally authorized to work in the United States.
Verification of employment eligibility will be required at the time of hire.
Visa sponsorship is not available for this position.
Physical Requirements
* Lift 30lbs
* Standing for long periods of time
About Us
 Howmet Aerospace Inc.
(NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries.
Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels.
With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweight, contributing to our customers' success and making a positive impact on the world.
To learn more about the way Howmet Aerospace Inc.
is advancing the sustainability of our customers, markets, and communities ...
....Read more...
Type: Permanent Location: Columbia, US-CT
Salary / Rate: Not Specified
Posted: 2026-05-28 07:40:53
-
Howmet Aerospace Inc.
(NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries.
Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels.
With $8.3 Billion in revenue in 2025, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world.
To learn more about the way Howmet Aerospace Inc.
is advancing the sustainability of our customers, markets, and communities where we operate, review the 2025 Environmental Social and Governance report at www.howmet.com/esg-report .
Follow: LinkedIn , Twitter , Instagram , Facebook , and YouTube .
Equal Opportunity Employer:
Howmet is proud to be an Equal Employment Opportunity employer.
We are committed to creating an inclusive environment for all employees.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics.
If you need assistance to complete your application due to a disability, please email TalentAcquisitionCoE_Howmet@howmet.comEDUCATION: Two-year degree, preferably in an engineering discipline or a specialized technical area.
Exceptions may be made when practical experience exists and performance in a prior technical position has been demonstrated.
EXPERIENCE: Two (2) years manufacturing experience.
Ability to read and interpret blue prints and customer requirements.
Ability to use common manufacturing measuring equipment.
Good communication skills.
PHYSICAL DEMANDS/EQUIPMENT USED: Good eyesight is necessary; employee must be able to satisfy the requirements of A.I.
M800, 01.14 Eye Exams at a minimum.
Computers and various hand micrometers are used.
Duties performed in manufacturing and office areas where compliance to safety rules is required.
SKILLS AND ABILITIES: Ability to use common manufacturing measurement equipment including vernier calipers, various hand micrometers, optical & laser inspection equipment, and pin gauges; good math skills including statistics, geometry, and trigonometry; good communication skills; mechanical aptitude is necessary; must be a self-starter and be very attentive to detail.JOB SUMMARY:
This position is responsible for in-house data analysis and data control.
Works with Engineering Departments, both at Howmet and casting houses, to satisfy customer requirements associated with core die qualifications.
Involved with writing programs on part inspection equipment.
May be used as a back-up in Dimensional Room.
JOB RESPONSIBILITIES:
Perform job duties in a safe and efficient manner
Data analysis and data control as required by PM301 (new or modified core die qualification) proc...
....Read more...
Type: Permanent Location: Morristown, US-TN
Salary / Rate: Not Specified
Posted: 2026-05-28 07:40:52
-
Support and coordinate completion of financial and operational audits and provide assistance, as needed, on special assignments.
Provide overall supervision for completion of financial and operational audits.
Review the work of the audit teams to ensure completion of tasks and identification of exceptions to policy or procedure.
Collaborate and provide guidance to various parts of the business as issues arise and modernization takes place.
Role model and demonstrate the company's core values of respect, honesty, integrity, diversity, inclusion and safety of others.
* Bachelors Degree in relevant field
* 10+ years of experience in financial audit experience at a large accounting firm or large corporation
* Strong background in financial and accounting principals
* Provide overall supervision of audits including scheduling, coordination and coaching
* Regular coordination and collaboration with business owners on new and emerging risks such as new investments/due diligence, deficiency remediation, interpreting complex contracts, changing processes, etc
* Talent development and associate engagement (1:1s, skip levels, job shadow, new technology training, etc).
* Supervise development of new audit programs and procedures
* Provide assurance on special requests and value based projects
* Review reporting of audit findings and communicate to various levels of stakeholders throughout the organization.
....Read more...
Type: Permanent Location: Cincinnati, US-OH
Salary / Rate: Not Specified
Posted: 2026-05-28 07:40:50
