-
Your Job
Georgia-Pacific is hiring a Technical Assistant (Assistant Superintendent) to join our team in Toledo, OR (Containerboard) supporting the Power and Utilities Area (including Causticizing and Recovery).
This position will provide strategic and technical leadership to achieve key operating objectives in safety, environmental compliance, reliability, production, quality, and cost.
The successful candidate will focus on safely improving productivity and reducing costs through process/equipment optimization and operator knowledge/skill improvement.
Long-term value is created through the application of the company's business philosophy of Principle Based Management and Georgia-Pacific's Guiding Principles.
Our Team
Georgia-Pacific Toledo is a producer of brown paper used to make cardboard and is a leader in recycling in the Northwest.
The Toledo Mill is located within a 10-minute drive to the Pacific Ocean.
Many outdoor activities are available near the mill including fishing, hiking, mountain biking, kayaking, and boating.
What You Will Do
• Drive a culture of safety and environmental excellence through critical hazard identification, risk reduction, and risk mitigation
• Collaborate directly with operators, shift leaders and Superintendents to meet the business objectives of the department and influence continuous improvement
• Lead teams in the identification, development, evaluation and implementation of safety, quality and/or cost reduction initiatives and projects that add the highest value to the operation to drive continuous improvement
• Lead outage planning and execution for cycle and routine outages; serve as an integral team member for annual outages.
• Assist in development and implementation of capital projects involving process improvements to document and optimize efforts
• Use process data, operating trends, and field observations to troubleshoot Power, Utilities, Recovery, and Causticizing systems and identify opportunities to improve reliability, efficiency, environmental performance, and operating stability
• Partner with operations, maintenance, engineering, reliability, and process control teams to resolve chronic equipment and process issues involving boilers, steam systems, turbines, liquor cycle equipment, rotating equipment, instrumentation, and process controls
• Support outage scope development by identifying technical priorities, validating repair recommendations, and ensuring equipment and process risks are addressed before restart.
• Lead or participate in root cause analyses, management of change reviews, and technical problem-solving efforts related to safety, environmental compliance, reliability, quality, and cost performance
Who You Are (Basic Qualifications)
• Two (2) or more years of experience working in a manufacturing, industrial, or military environment
• One (1) or more years of experience leading continuous improvement initiatives and/or reliability strategies...
....Read more...
Type: Permanent Location: Toledo, US-OR
Salary / Rate: Not Specified
Posted: 2026-07-31 09:48:17
-
Your Job
As an Electronic Assembler at Molex ADS, you will play a critical role in building, wiring, and testing high-precision electronic assemblies that power our innovative process-control and analytical systems.
You'll collaborate closely with assembly technicians and quality teams to ensure every unit meets our rigorous standards for performance, reliability, and safety.
The hours for this position are Monday - Friday, 4pm - 12:30am.
There is a 10% shift differential for this position.
Our Team
You will join the Advanced Electronics Manufacturing division, a fast-paced group dedicated to prototyping, volume production, and continuous improvement of instrumentation products.
Our cross-functional team of design engineers, quality specialists, and assembly technicians works in a highly collaborative environment-where your feedback directly shapes product refinements and process efficiencies.
What You Will Do
* Must be comfortable sitting for extended periods of time.
* Usage of high powered & intensity microscope is required.
* Interpret and follow detailed schematics, wiring diagrams, and work instructions to assemble electronic modules and sub-assemblies.
* Assemble components using small hand tools, crimping equipment, & scales.
* Conduct in-process inspections and functional tests (continuity, insulation resistance, signal integrity) to verify assembly quality.
* Troubleshoot and document non-conformances; work with assembly technicians to implement corrective actions and design improvements.
* Maintain clean, organized workstations and adhere to ESD, safety, and traceability protocols.
Who You Are (Basic Qualifications)
* High school diploma or GED (technical/vocational training in electronics preferred).
* Minimum 1 year of hands-on experience in electronic assembly or related field.
* Ability to read and interpret electrical schematics, wiring diagrams, and assembly drawings; Entry-level understanding is acceptable.
* Comfortable using hand tools, microscopes, multimeters, and basic test equipment.
What Will Put You Ahead
* IPC-610 / J-STD-001 certification for soldering and assembly standards
* Proven manual dexterity and visual acuity for fine pitch soldering and component placement.
* Experience with both through-hole and surface-mount assembly processes.
* Familiarity with automated optical inspection (AOI) and in-circuit testing (ICT) systems.
* Prior exposure to lean manufacturing or Six Sigma methodologies.
* Associate's degree in Electronics Technology or related discipline.
At Koch companies, we are entrepreneurs.
This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions.
Any compensation range provided for a role is an estimate determined by available market data.
The actual amount may be higher or lower than the range provided considering each candidate's knowl...
....Read more...
Type: Permanent Location: Erie, US-PA
Salary / Rate: Not Specified
Posted: 2026-07-31 09:48:17
-
Your Job
As an Electronic Assembler at Molex ADS, you will play a critical role in building, wiring, and testing high-precision electronic assemblies that power our innovative process-control and analytical systems.
You'll collaborate closely with assembly technicians and quality teams to ensure every unit meets our rigorous standards for performance, reliability, and safety.
The hours for this position are Monday - Thursday, 2pm - 12:30am.
There is a 6% shift differential for this position.
Our Team
You will join the Advanced Electronics Manufacturing division, a fast-paced group dedicated to prototyping, volume production, and continuous improvement of instrumentation products.
Our cross-functional team of design engineers, quality specialists, and assembly technicians works in a highly collaborative environment-where your feedback directly shapes product refinements and process efficiencies.
What You Will Do
* Must be comfortable sitting for extended periods of time.
* Usage of high powered & intensity microscope is sometimes required.
* Interpret and follow detailed schematics, wiring diagrams, and work instructions to assemble electronic modules and sub-assemblies.
* Assemble components using small hand tools, crimping equipment, & scales.
* Conduct in-process inspections and functional tests (continuity, insulation resistance, signal integrity) to verify assembly quality.
* Troubleshoot and document non-conformances; work with assembly technicians to implement corrective actions and design improvements.
* Maintain clean, organized workstations and adhere to ESD, safety, and traceability protocols.
Who You Are (Basic Qualifications)
* High school diploma or GED (technical/vocational training in electronics preferred).
* Minimum 1 year of hands-on experience in electronic assembly or related field.
* Ability to read and interpret electrical schematics, wiring diagrams, and assembly drawings; Entry-level understanding is acceptable.
* Comfortable using hand tools, microscopes, multimeters, and basic test equipment.
What Will Put You Ahead
* IPC-610 / J-STD-001 certification for soldering and assembly standards.
* Proven manual dexterity and visual acuity for fine pitch soldering and component placement.
* Experience with both through-hole and surface-mount assembly processes.
* Familiarity with automated optical inspection (AOI) and in-circuit testing (ICT) systems.
* Prior exposure to lean manufacturing or Six Sigma methodologies.
* Associate's degree in Electronics Technology or related discipline.
For this role, we anticipate paying $16 - $22/hr.
This role is eligible for variable pay, issued as a monetary bonus or in another form.
At Koch companies, we are entrepreneurs.
This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions.
Any compensation range provided for a role i...
....Read more...
Type: Permanent Location: St Cloud, US-MN
Salary / Rate: Not Specified
Posted: 2026-07-31 09:48:16
-
Your Job
As an Electronic Assembler at Molex ADS, you will play a critical role in building, wiring, and testing high-precision electronic assemblies that power our innovative process-control and analytical systems.
You'll collaborate closely with assembly technicians and quality teams to ensure every unit meets our rigorous standards for performance, reliability, and safety.
The hours for this position are Monday - Friday, 7am - 3:30pm.
Our Team
You will join the Advanced Electronics Manufacturing division, a fast-paced group dedicated to prototyping, volume production, and continuous improvement of instrumentation products.
Our cross-functional team of design engineers, quality specialists, and assembly technicians works in a highly collaborative environment-where your feedback directly shapes product refinements and process efficiencies.
What You Will Do
* Must be comfortable sitting for extended periods of time.
* Usage of high powered & intensity microscope is required.
* Interpret and follow detailed schematics, wiring diagrams, and work instructions to assemble electronic modules and sub-assemblies.
* Assemble components using small hand tools, crimping equipment, & scales.
* Conduct in-process inspections and functional tests (continuity, insulation resistance, signal integrity) to verify assembly quality.
* Troubleshoot and document non-conformances; work with assembly technicians to implement corrective actions and design improvements.
* Maintain clean, organized workstations and adhere to ESD, safety, and traceability protocols.
Who You Are (Basic Qualifications)
* High school diploma or GED (technical/vocational training in electronics preferred).
* Minimum 1 year of hands-on experience in electronic assembly or related field.
* Ability to read and interpret electrical schematics, wiring diagrams, and assembly drawings; Entry-level understanding is acceptable.
* Comfortable using hand tools, microscopes, multimeters, and basic test equipment.
What Will Put You Ahead
* IPC-610 / J-STD-001 certification for soldering and assembly standards
* Proven manual dexterity and visual acuity for fine pitch soldering and component placement.
* Experience with both through-hole and surface-mount assembly processes.
* Familiarity with automated optical inspection (AOI) and in-circuit testing (ICT) systems.
* Prior exposure to lean manufacturing or Six Sigma methodologies.
* Associate's degree in Electronics Technology or related discipline.
At Koch companies, we are entrepreneurs.
This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions.
Any compensation range provided for a role is an estimate determined by available market data.
The actual amount may be higher or lower than the range provided considering each candidate's knowledge, skills, abilities, and geographic location.
If y...
....Read more...
Type: Permanent Location: Lake City, US-PA
Salary / Rate: Not Specified
Posted: 2026-07-31 09:48:16
-
Your Job
As an Electronic Assembler at Molex ADS, you will play a critical role in building, wiring, and testing high-precision electronic assemblies that power our innovative process-control and analytical systems.
You'll collaborate closely with assembly technicians and quality teams to ensure every unit meets our rigorous standards for performance, reliability, and safety.
The hours for this position are Monday - Friday, 7am - 3:30pm.
Our Team
You will join the Advanced Electronics Manufacturing division, a fast-paced group dedicated to prototyping, volume production, and continuous improvement of instrumentation products.
Our cross-functional team of design engineers, quality specialists, and assembly technicians works in a highly collaborative environment-where your feedback directly shapes product refinements and process efficiencies.
What You Will Do
* Must be comfortable sitting for extended periods of time.
* Usage of high powered & intensity microscope is required.
* Interpret and follow detailed schematics, wiring diagrams, and work instructions to assemble electronic modules and sub-assemblies.
* Assemble components using small hand tools, crimping equipment, & scales.
* Conduct in-process inspections and functional tests (continuity, insulation resistance, signal integrity) to verify assembly quality.
* Troubleshoot and document non-conformances; work with assembly technicians to implement corrective actions and design improvements.
* Maintain clean, organized workstations and adhere to ESD, safety, and traceability protocols.
Who You Are (Basic Qualifications)
* High school diploma or GED (technical/vocational training in electronics preferred).
* Minimum 1 year of hands-on experience in electronic assembly or related field.
* Ability to read and interpret electrical schematics, wiring diagrams, and assembly drawings; Entry-level understanding is acceptable.
* Comfortable using hand tools, microscopes, multimeters, and basic test equipment.
What Will Put You Ahead
* IPC-610 / J-STD-001 certification for soldering and assembly standards
* Proven manual dexterity and visual acuity for fine pitch soldering and component placement.
* Experience with both through-hole and surface-mount assembly processes.
* Familiarity with automated optical inspection (AOI) and in-circuit testing (ICT) systems.
* Prior exposure to lean manufacturing or Six Sigma methodologies.
* Associate's degree in Electronics Technology or related discipline.
At Koch companies, we are entrepreneurs.
This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions.
Any compensation range provided for a role is an estimate determined by available market data.
The actual amount may be higher or lower than the range provided considering each candidate's knowledge, skills, abilities, and geographic location.
If y...
....Read more...
Type: Permanent Location: Erie, US-PA
Salary / Rate: Not Specified
Posted: 2026-07-31 09:48:15
-
Your Job
As an Electronic Assembler at Molex ADS, you will play a critical role in building, wiring, and testing high-precision electronic assemblies that power our innovative process-control and analytical systems.
You'll collaborate closely with assembly technicians and quality teams to ensure every unit meets our rigorous standards for performance, reliability, and safety.
The hours for this position are Monday - Thursday, 2pm - 12:30am.
There is a 6% shift differential for this position.
Our Team
You will join the Advanced Electronics Manufacturing division, a fast-paced group dedicated to prototyping, volume production, and continuous improvement of instrumentation products.
Our cross-functional team of design engineers, quality specialists, and assembly technicians works in a highly collaborative environment-where your feedback directly shapes product refinements and process efficiencies.
What You Will Do
* Must be comfortable sitting for extended periods of time.
* Usage of high powered & intensity microscope is sometimes required.
* Interpret and follow detailed schematics, wiring diagrams, and work instructions to assemble electronic modules and sub-assemblies.
* Assemble components using small hand tools, crimping equipment, & scales.
* Conduct in-process inspections and functional tests (continuity, insulation resistance, signal integrity) to verify assembly quality.
* Troubleshoot and document non-conformances; work with assembly technicians to implement corrective actions and design improvements.
* Maintain clean, organized workstations and adhere to ESD, safety, and traceability protocols.
Who You Are (Basic Qualifications)
* High school diploma or GED (technical/vocational training in electronics preferred).
* Minimum 1 year of hands-on experience in electronic assembly or related field.
* Ability to read and interpret electrical schematics, wiring diagrams, and assembly drawings; Entry-level understanding is acceptable.
* Comfortable using hand tools, microscopes, multimeters, and basic test equipment.
What Will Put You Ahead
* IPC-610 / J-STD-001 certification for soldering and assembly standards.
* Proven manual dexterity and visual acuity for fine pitch soldering and component placement.
* Experience with both through-hole and surface-mount assembly processes.
* Familiarity with automated optical inspection (AOI) and in-circuit testing (ICT) systems.
* Prior exposure to lean manufacturing or Six Sigma methodologies.
* Associate's degree in Electronics Technology or related discipline.
For this role, we anticipate paying $16 - $22/hr.
This role is eligible for variable pay, issued as a monetary bonus or in another form.
At Koch companies, we are entrepreneurs.
This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions.
Any compensation range provided for a role i...
....Read more...
Type: Permanent Location: Little Falls, US-MN
Salary / Rate: Not Specified
Posted: 2026-07-31 09:48:14
-
Your Job
Georgia-Pacific is now hiring a Multi Craft Maintenance Technician Lead to join our Corrugated facility in Waxahachie, TX.
This position provides Maintenance support to all areas of Operations and will be responsible for the supervision of Maintenance Technicians.
Pay Rate:
* $40.31
* Off shift, shift differential = $2.00
* You will have the ability to increase your compensation based on skills and contribution to the overall performance of the plant
Shift:
* Hiring for 3rd shift: 11:00pm-7:00am (starts Monday night)
* Overtime, holidays, and weekends as needed
Facility Hours:
* 1st Shift: 7:00 AM - 3:00 PM
* 2nd Shift: 3:00 PM - 11:00 PM
* 3rd Shift: 11:00 PM - 7:00 AM
* Overtime, holidays, and weekends as needed
Physical Location: 5800 N Interstate 35 E
Waxahachie, TX 75165
Our Team
Our team creates value by safely assisting with the production of corrugated boxes for our valued customers.
Click here to see how we make corrugated boxes, and click here to learn more about our products!
What You Will Do
* Will be responsible for planning, monitoring and supervising all activities associated with Maintenance technicians of assigned areas
* Assist in troubleshooting and repairing mechanical, electrical/electronic, pneumatics and hydraulic equipment including power supplies, drives, gages and test equipment.
Installs, start-up and shutdown of equipment in accordance with company safety procedures for machine activation and shutdown under OSHA requirements
* Perform preventative maintenance functions and considered a working Team Leader
* Perform or assist in fabrication, Predicative Maintenance, and routine checks
* Assist both Operations and Maintenance personnel with technical troubleshooting
* Assist and train other Maintenance and/or technical level employees
* Communicate effectively with others at various levels using both oral and written communication skills
* Participate in a team environment and contribute to various continuous improvement initiatives, major capital projects, equipment installations and facility improvements
* Responsible for all necessary reporting and required documentation
* Train others and foster a positive team environment
* This position may require travel for training purposes
Who You Are (Basic Qualifications)
* 5+ years of proven industrial/manufacturing maintenance experience, specifically in mechanical and electrical/electronics
* Experience in high volume manufacturing
* Experience in troubleshooting industrial electrical controls, including PLC's, HMI's and AC/DC drives
* Experience with reading and understanding electrical prints.
* Experience troubleshooting and repairing hydraulic and pneumatics systems
* Experience troubleshooting issues and making repairs on bearings, chains, sprockets, gearboxes, conveyors, etc.
* Experience with reading and unde...
....Read more...
Type: Permanent Location: Waxahachie, US-TX
Salary / Rate: Not Specified
Posted: 2026-07-31 09:48:13
-
Your Job
Join the Molex Aerospace & Defense Sector (ADS) manufacturing team as a Production Operator.
In this role you will deliver defect-free product by applying disciplined workmanship, following regulated processes, and helping drive continual improvement in a safety- and quality-focused environment.
The Hours for this position are Monday - Friday, 6am - 2:30pm.
Our Team
You will be part of a cross-functional production team that partners closely with Quality, Engineering, and Supply Chain to meet demanding customer requirements (AS9100, ITAR).
The team values precision, traceability, and continuous improvement while operating in a controlled, high-reliability manufacturing environment.
What You Will Do
* Operate production and manufacturing equipment according to work instructions and process requirements.
* Load materials, monitor machine performance, and make basic adjustments as required.
* Maintain full traceability and accurate documentation for all work, ensuring compliance with AS9100, ITAR/DFARS, and customer-specific requirements.
* Apply disciplined assembly techniques (crimp, solder, splice, potting, conformal coating, heat-shrink) to deliver repeatable, auditable results.
* Use inspection and test methods (visual, dimensional, electrical testing) to verify integrity and collaborate with Quality to resolve nonconformances.
* Contribute ideas and participate in continuous improvement activities (5S, Kaizen, process simplification) to improve output, reduce defects, and shorten lead time.
* Communicate proactively with Leads, Engineers, and Inspectors to escalate issues, implement corrective actions, and support training for newer team members.
Who You Are (Basic Qualifications)
* High school diploma or GED.
* 1+ years of hands-on manufacturing or assembly experience (electronics, interconnect, or cable harness preferred).
* Able to read and follow engineering drawings, wiring diagrams, and written work instructions; basic measurement and arithmetic skills.
* Eligible to work on ITAR-controlled programs (U.S.
person status if required) and able to pass background checks and drug screening.
* Able to stand for extended periods, perform fine-motor tasks, and occasionally lift up to 30-50 lbs per site policy.
What Will Put You Ahead
* IPC-A-610 certification (or equivalent) and/or J-STD-001 soldering certification.
* Direct experience with cable harness assembly, crimp tooling, crimp press qualification, and harness test equipment (continuity, hi-pot).
* Familiarity with AS9100/FAI (AS9102) requirements and aerospace/defense quality systems.
* Experience working in ESD-controlled or other controlled-environment manufacturing areas and using microscopes/video inspection systems.
* Demonstrated participation in Lean/continuous improvement projects (Kaizen events, 5S implementations, productivity improvements).
For this role, we anticipate ...
....Read more...
Type: Permanent Location: St Cloud, US-MN
Salary / Rate: Not Specified
Posted: 2026-07-31 09:48:13
-
Your Job
Join the Molex Aerospace & Defense Sector (ADS) manufacturing team as a Production Operator.
In this role you will deliver defect-free product by applying disciplined workmanship, following regulated processes, and helping drive continual improvement in a safety- and quality-focused environment.
The Hours for this position are Monday - Thursday, 2pm - 12:30am.
This shift includes a 6% shift differential.
Our Team
You will be part of a cross-functional production team that partners closely with Quality, Engineering, and Supply Chain to meet demanding customer requirements (AS9100, ITAR).
The team values precision, traceability, and continuous improvement while operating in a controlled, high-reliability manufacturing environment.
What You Will Do
* Operate production and manufacturing equipment according to work instructions and process requirements.
* Load materials, monitor machine performance, and make basic adjustments as required.
* Maintain full traceability and accurate documentation for all work, ensuring compliance with AS9100, ITAR/DFARS, and customer-specific requirements.
* Apply disciplined assembly techniques (crimp, solder, splice, potting, conformal coating, heat-shrink) to deliver repeatable, auditable results.
* Use inspection and test methods (visual, dimensional, electrical testing) to verify integrity and collaborate with Quality to resolve nonconformances.
* Contribute ideas and participate in continuous improvement activities (5S, Kaizen, process simplification) to improve output, reduce defects, and shorten lead time.
* Communicate proactively with Leads, Engineers, and Inspectors to escalate issues, implement corrective actions, and support training for newer team members.
Who You Are (Basic Qualifications)
* High school diploma or GED.
* 1+ years of hands-on manufacturing or assembly experience (electronics, interconnect, or cable harness preferred).
* Able to read and follow engineering drawings, wiring diagrams, and written work instructions; basic measurement and arithmetic skills.
* Eligible to work on ITAR-controlled programs (U.S.
person status if required) and able to pass background checks and drug screening.
* Able to stand for extended periods, perform fine-motor tasks, and occasionally lift up to 30-50 lbs per site policy.
What Will Put You Ahead
* IPC-A-610 certification (or equivalent) and/or J-STD-001 soldering certification.
* Direct experience with cable harness assembly, crimp tooling, crimp press qualification, and harness test equipment (continuity, hi-pot).
* Familiarity with AS9100/FAI (AS9102) requirements and aerospace/defense quality systems.
* Experience working in ESD-controlled or other controlled-environment manufacturing areas and using microscopes/video inspection systems.
* Demonstrated participation in Lean/continuous improvement projects (Kaizen events, 5S implementations, productivi...
....Read more...
Type: Permanent Location: Little Falls, US-MN
Salary / Rate: Not Specified
Posted: 2026-07-31 09:48:12
-
Your Job
Join the Molex Aerospace & Defense Sector (ADS) manufacturing team as a Production Operator.
In this role you will deliver defect-free product by applying disciplined workmanship, following regulated processes, and helping drive continual improvement in a safety- and quality-focused environment.
The hours for this position are Sunday - Wednesday, 7:30pm - 6am.
There is a 6% shift differential for this position.
Our Team
You will be part of a cross-functional production team that partners closely with Quality, Engineering, and Supply Chain to meet demanding customer requirements (AS9100, ITAR).
The team values precision, traceability, and continuous improvement while operating in a controlled, high-reliability manufacturing environment.
What You Will Do
* Operate production and manufacturing equipment according to work instructions and process requirements.
* Load materials, monitor machine performance, and make basic adjustments as required.
* Maintain full traceability and accurate documentation for all work, ensuring compliance with AS9100, ITAR/DFARS, and customer-specific requirements.
* Apply disciplined assembly techniques (crimp, solder, splice, potting, conformal coating, heat-shrink) to deliver repeatable, auditable results.
* Use inspection and test methods (visual, dimensional, electrical testing) to verify integrity and collaborate with Quality to resolve nonconformances.
* Contribute ideas and participate in continuous improvement activities (5S, Kaizen, process simplification) to improve output, reduce defects, and shorten lead time.
* Communicate proactively with Leads, Engineers, and Inspectors to escalate issues, implement corrective actions, and support training for newer team members.
Who You Are (Basic Qualifications)
* High school diploma or GED.
* 1+ years of hands-on manufacturing or assembly experience (electronics, interconnect, or cable harness preferred).
* Able to read and follow engineering drawings, wiring diagrams, and written work instructions; basic measurement and arithmetic skills.
* Eligible to work on ITAR-controlled programs (U.S.
person status if required) and able to pass background checks and drug screening.
* Able to stand for extended periods, perform fine-motor tasks, and occasionally lift up to 30-50 lbs per site policy.
What Will Put You Ahead
* IPC-A-610 certification (or equivalent) and/or J-STD-001 soldering certification.
* Direct experience with cable harness assembly, crimp tooling, crimp press qualification, and harness test equipment (continuity, hi-pot).
* Familiarity with AS9100/FAI (AS9102) requirements and aerospace/defense quality systems.
* Experience working in ESD-controlled or other controlled-environment manufacturing areas and using microscopes/video inspection systems.
* Demonstrated participation in Lean/continuous improvement projects (Kaizen events, 5S implementations, pro...
....Read more...
Type: Permanent Location: St Cloud, US-MN
Salary / Rate: Not Specified
Posted: 2026-07-31 09:48:10
-
Your Job
Join the Molex Aerospace & Defense Sector (ADS) manufacturing team as a Production Operator.
In this role you will deliver defect-free product by applying disciplined workmanship, following regulated processes, and helping drive continual improvement in a safety- and quality-focused environment.
The Hours for this position are Monday - Friday, 6am - 2:30pm.
Our Team
You will be part of a cross-functional production team that partners closely with Quality, Engineering, and Supply Chain to meet demanding customer requirements (AS9100, ITAR).
The team values precision, traceability, and continuous improvement while operating in a controlled, high-reliability manufacturing environment.
What You Will Do
* Operate production and manufacturing equipment according to work instructions and process requirements.
* Load materials, monitor machine performance, and make basic adjustments as required.
* Maintain full traceability and accurate documentation for all work, ensuring compliance with AS9100, ITAR/DFARS, and customer-specific requirements.
* Apply disciplined assembly techniques (crimp, solder, splice, potting, conformal coating, heat-shrink) to deliver repeatable, auditable results.
* Use inspection and test methods (visual, dimensional, electrical testing) to verify integrity and collaborate with Quality to resolve nonconformances.
* Contribute ideas and participate in continuous improvement activities (5S, Kaizen, process simplification) to improve output, reduce defects, and shorten lead time.
* Communicate proactively with Leads, Engineers, and Inspectors to escalate issues, implement corrective actions, and support training for newer team members.
Who You Are (Basic Qualifications)
* High school diploma or GED.
* 1+ years of hands-on manufacturing or assembly experience (electronics, interconnect, or cable harness preferred).
* Able to read and follow engineering drawings, wiring diagrams, and written work instructions; basic measurement and arithmetic skills.
* Eligible to work on ITAR-controlled programs (U.S.
person status if required) and able to pass background checks and drug screening.
* Able to stand for extended periods, perform fine-motor tasks, and occasionally lift up to 30-50 lbs per site policy.
What Will Put You Ahead
* IPC-A-610 certification (or equivalent) and/or J-STD-001 soldering certification.
* Direct experience with cable harness assembly, crimp tooling, crimp press qualification, and harness test equipment (continuity, hi-pot).
* Familiarity with AS9100/FAI (AS9102) requirements and aerospace/defense quality systems.
* Experience working in ESD-controlled or other controlled-environment manufacturing areas and using microscopes/video inspection systems.
* Demonstrated participation in Lean/continuous improvement projects (Kaizen events, 5S implementations, productivity improvements).
For this role, we anticipate ...
....Read more...
Type: Permanent Location: Little Falls, US-MN
Salary / Rate: Not Specified
Posted: 2026-07-31 09:48:09
-
Your Job
Join the Molex Aerospace & Defense Sector (ADS) manufacturing team as a Production Operator.
In this role you will deliver defect-free product by applying disciplined workmanship, following regulated processes, and helping drive continual improvement in a safety- and quality-focused environment.
The Hours for this position are Monday - Thursday, 2pm - 12:30am.
This shift includes a 6% shift differential.
Our Team
You will be part of a cross-functional production team that partners closely with Quality, Engineering, and Supply Chain to meet demanding customer requirements (AS9100, ITAR).
The team values precision, traceability, and continuous improvement while operating in a controlled, high-reliability manufacturing environment.
What You Will Do
* Operate production and manufacturing equipment according to work instructions and process requirements.
* Load materials, monitor machine performance, and make basic adjustments as required.
* Maintain full traceability and accurate documentation for all work, ensuring compliance with AS9100, ITAR/DFARS, and customer-specific requirements.
* Apply disciplined assembly techniques (crimp, solder, splice, potting, conformal coating, heat-shrink) to deliver repeatable, auditable results.
* Use inspection and test methods (visual, dimensional, electrical testing) to verify integrity and collaborate with Quality to resolve nonconformances.
* Contribute ideas and participate in continuous improvement activities (5S, Kaizen, process simplification) to improve output, reduce defects, and shorten lead time.
* Communicate proactively with Leads, Engineers, and Inspectors to escalate issues, implement corrective actions, and support training for newer team members.
Who You Are (Basic Qualifications)
* High school diploma or GED.
* 1+ years of hands-on manufacturing or assembly experience (electronics, interconnect, or cable harness preferred).
* Able to read and follow engineering drawings, wiring diagrams, and written work instructions; basic measurement and arithmetic skills.
* Eligible to work on ITAR-controlled programs (U.S.
person status if required) and able to pass background checks and drug screening.
* Able to stand for extended periods, perform fine-motor tasks, and occasionally lift up to 30-50 lbs per site policy.
What Will Put You Ahead
* IPC-A-610 certification (or equivalent) and/or J-STD-001 soldering certification.
* Direct experience with cable harness assembly, crimp tooling, crimp press qualification, and harness test equipment (continuity, hi-pot).
* Familiarity with AS9100/FAI (AS9102) requirements and aerospace/defense quality systems.
* Experience working in ESD-controlled or other controlled-environment manufacturing areas and using microscopes/video inspection systems.
* Demonstrated participation in Lean/continuous improvement projects (Kaizen events, 5S implementations, productivi...
....Read more...
Type: Permanent Location: St Cloud, US-MN
Salary / Rate: Not Specified
Posted: 2026-07-31 09:48:08
-
Your Job
Join the Molex Aerospace & Defense Sector (ADS) manufacturing team as a Production Operator.
In this role you will deliver defect-free product by applying disciplined workmanship, following regulated processes, and helping drive continual improvement in a safety- and quality-focused environment.
The hours for this position are Sunday - Wednesday, 7:30pm - 6am.
There is a 6% shift differential for this position.
Our Team
You will be part of a cross-functional production team that partners closely with Quality, Engineering, and Supply Chain to meet demanding customer requirements (AS9100, ITAR).
The team values precision, traceability, and continuous improvement while operating in a controlled, high-reliability manufacturing environment.
What You Will Do
* Operate production and manufacturing equipment according to work instructions and process requirements.
* Load materials, monitor machine performance, and make basic adjustments as required.
* Maintain full traceability and accurate documentation for all work, ensuring compliance with AS9100, ITAR/DFARS, and customer-specific requirements.
* Apply disciplined assembly techniques (crimp, solder, splice, potting, conformal coating, heat-shrink) to deliver repeatable, auditable results.
* Use inspection and test methods (visual, dimensional, electrical testing) to verify integrity and collaborate with Quality to resolve nonconformances.
* Contribute ideas and participate in continuous improvement activities (5S, Kaizen, process simplification) to improve output, reduce defects, and shorten lead time.
* Communicate proactively with Leads, Engineers, and Inspectors to escalate issues, implement corrective actions, and support training for newer team members.
Who You Are (Basic Qualifications)
* High school diploma or GED.
* 1+ years of hands-on manufacturing or assembly experience (electronics, interconnect, or cable harness preferred).
* Able to read and follow engineering drawings, wiring diagrams, and written work instructions; basic measurement and arithmetic skills.
* Eligible to work on ITAR-controlled programs (U.S.
person status if required) and able to pass background checks and drug screening.
* Able to stand for extended periods, perform fine-motor tasks, and occasionally lift up to 30-50 lbs per site policy.
What Will Put You Ahead
* IPC-A-610 certification (or equivalent) and/or J-STD-001 soldering certification.
* Direct experience with cable harness assembly, crimp tooling, crimp press qualification, and harness test equipment (continuity, hi-pot).
* Familiarity with AS9100/FAI (AS9102) requirements and aerospace/defense quality systems.
* Experience working in ESD-controlled or other controlled-environment manufacturing areas and using microscopes/video inspection systems.
* Demonstrated participation in Lean/continuous improvement projects (Kaizen events, 5S implementations, pro...
....Read more...
Type: Permanent Location: Little Falls, US-MN
Salary / Rate: Not Specified
Posted: 2026-07-31 09:48:08
-
Your Job
As an Electronic Assembler at Molex ADS, you will play a critical role in building, wiring, and testing high-precision electronic assemblies that power our innovative process-control and analytical systems.
You'll collaborate closely with assembly technicians and quality teams to ensure every unit meets our rigorous standards for performance, reliability, and safety.
Schedule is Monday - Friday 6:30am-3:00pm.
Our Team
You will join the Advanced Electronics Manufacturing division, a fast-paced group dedicated to prototyping, volume production, and continuous improvement of instrumentation products.
Our cross-functional team of design engineers, quality specialists, and assembly technicians works in a highly collaborative environment-where your feedback directly shapes product refinements and process efficiencies.
What You Will Do
* Must be comfortable sitting for extended periods of time.
* Usage of high powered & intensity microscope is required.
* Interpret and follow detailed schematics, wiring diagrams, and work instructions to assemble electronic modules and sub-assemblies.
* Assemble components using small hand tools, crimping equipment, & scales.
* Conduct in-process inspections and functional tests (continuity, insulation resistance, signal integrity) to verify assembly quality.
* Troubleshoot and document non-conformances; work with assembly technicians to implement corrective actions and design improvements.
* Maintain clean, organized workstations and adhere to ESD, safety, and traceability protocols.
Who You Are (Basic Qualifications)
* High school diploma or GED (technical/vocational training in electronics preferred).
* Minimum 1 year of hands-on experience in electronic assembly or related field.
* Ability to read and interpret electrical schematics, wiring diagrams, and assembly drawings; Entry-level understanding is acceptable.
* Comfortable using hand tools, microscopes, multimeters, and basic test equipment.
What Will Put You Ahead (Preferred Qualifications)
* IPC-610 / J-STD-001 certification for soldering and assembly standards
* Proven manual dexterity and visual acuity for fine pitch soldering and component placement.
* Experience with both through-hole and surface-mount assembly processes.
* Familiarity with automated optical inspection (AOI) and in-circuit testing (ICT) systems.
* Prior exposure to lean manufacturing or Six Sigma methodologies.
* Associate's degree in Electronics Technology or related discipline.
Who We Are
As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications.
The thousands of innovators who work for Molex have made us a global electronics leader.
Our experienced people, groundbreaking products and leading-edge technologies help us deliver a w...
....Read more...
Type: Permanent Location: Georgetown, US-TX
Salary / Rate: Not Specified
Posted: 2026-07-31 09:48:07
-
Your Job
Anchor Packaging, a Georgia Pacific company, is looking for individuals to join their dynamic team of Repackers at the Paragould Arkansas Distribution Center.
In this role, you'll be responsible for performing the repacking /6S duties and requirements in a safe, organized, and efficient manner while delighting customers with quality products.
Pay: 16.50 to 17.90
Shifts Available:
* Monday-Friday 7:00am to 3:00pm
What You Will Do
* Maintain the buildings and grounds to ensure requirements are met for all audits
* Perform tasks such as lifting up to 50lbs, walking, climbing, stooping, standing, pushing and/or pulling for up to eight/ten hours a day, in a loud/noisy, and industrial, high-volume environment
* Ensure product packaging requirements according to work instructions, specification sheet, and/or quality docket before packing the product
* Ensure quality checks of the product before being packaged
* Repack the product to meet customer specifications
* Tape, label, and stack boxes on pallets for material handler pickup.
* Hand unloading of all containers
* Communicate with leads
Who You Are (Basic Qualifications)
* High School Diploma, GED, or a minimum of six (6) months of manufacturing experience
* Experience working with a computer, tablet, or smartphone
What Will Put You Ahead
* One (1) or more years of experience working in a manufacturing, warehouse, automotive, agricultural, or military environment
* Quality or auditing experience
At Koch companies, we are entrepreneurs.
This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions.
Any compensation range provided for a role is an estimate determined by available market data.
The actual amount may be higher or lower than the range provided considering each candidate's knowledge, skills, abilities, and geographic location.
If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.
Hiring Philosophy
All Koch companies value diversity of thought, perspectives, aptitudes, experiences, and backgrounds.
We are Military Ready and Second Chance employers.
Learn more about our hiring philosophy here.
Who We Are
As a Koch company and a leading manufacturer of bath tissue, paper towels, paper-based packaging, cellulose, specialty fibers, building products, and much more, Georgia-Pacific works to meet the evolving needs of customers worldwide with quality products.
In addition to the products we make, we operate one of the largest recycling businesses.
Our more than 30,000 employees in over 150 locations are empowered to innovate every day - to make everyday products even better.
At Koch, employees are empowered to do what they do best to make life better.
Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.
Our ...
....Read more...
Type: Permanent Location: Paragould, US-AR
Salary / Rate: Not Specified
Posted: 2026-07-31 09:48:06
-
Your Job
Our Owosso Michigan location is seeking a Quality Coordinator to support manufacturing of corrugated containers
Our Team
Our Georgia Pacific Team is one of the nation's leading corrugated box manufactures.
We manufacture standard corrugated containers providing cost effective corrugated solutions for virtually any product
What You Will Do
* Coordinate, perform, and maintain calibration procedures
* Provide quality systems training and assistance to employees in quality decisions and measurement techniques
* Complete capability studies and gauge R&R analysis
* Prepare appropriate inspection records and measurement reports
* Perform inventory transactions for acceptable and non-conforming product and properly document
Supporting integration of quality systems and ensuring product quality and safety compliance
• Collaborate with teams to improve customer satisfaction and supplier performance
• Lead/manufacturing support for Product Quality & Safety compliance
• Conduct data analysis (KPIs) to identify improvement opportunities
• Support internal audits and ensure compliance with safety and quality policies
• Participate in customer engagement and site visits
• Own testing and quality systems for plant equipment
• Assist in driving overall customer experience improvements
* Process Monitoring & Audits: Conduct process audits, follow structured quality schedules, and ensure equipment calibration.
* Troubleshooting & Optimization: Identify and resolve quality issues, and use root-cause analysis tools (e.g., 5 Whys, fishbone diagrams).
* Collaboration & Communication: Work closely with production, maintenance, and supervisory teams; train operators on quality standards and inspection methods; participate in continuous improvement initiatives.
* Administrative & Computer Skills: Maintain inspection records, generate quality reports, and use Microsoft Office and plant systems for data analysis and reporting.
Who You Are (Basic Qualifications)
* Prior quality experience OR Military experience
What Will Put You Ahead
* Experience using ERP systems
* Associate's Degree or higher in a related field
* Measurement experience using Calipers, Micrometers, CMM or Visions Systems
* Experience working in an manufacturing environment
At Koch companies, we are entrepreneurs.
This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions.
Any compensation range provided for a role is an estimate determined by available market data.
The actual amount may be higher or lower than the range provided considering each candidate's knowledge, skills, abilities, and geographic location.
If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.
Hiring Philosophy
All Koch companies value diversity of thought, perspectives, aptitudes, experiences, ...
....Read more...
Type: Permanent Location: Owosso, US-MI
Salary / Rate: Not Specified
Posted: 2026-07-31 09:48:06
-
Your Job
As an Electronic Assembler at Molex ADS, you will play a critical role in building, wiring, and testing high-precision electronic assemblies that power our innovative process-control and analytical systems.
You'll collaborate closely with assembly technicians and quality teams to ensure every unit meets our rigorous standards for performance, reliability, and safety.
Schedule is Monday - Friday 3:30pm-12:00am.
Our Team
You will join the Advanced Electronics Manufacturing division, a fast-paced group dedicated to prototyping, volume production, and continuous improvement of instrumentation products.
Our cross-functional team of design engineers, quality specialists, and assembly technicians works in a highly collaborative environment-where your feedback directly shapes product refinements and process efficiencies.
What You Will Do
* Must be comfortable sitting for extended periods of time.
* Usage of high powered & intensity microscope is required.
* Interpret and follow detailed schematics, wiring diagrams, and work instructions to assemble electronic modules and sub-assemblies.
* Assemble components using small hand tools, crimping equipment, & scales.
* Conduct in-process inspections and functional tests (continuity, insulation resistance, signal integrity) to verify assembly quality.
* Troubleshoot and document non-conformances; work with assembly technicians to implement corrective actions and design improvements.
* Maintain clean, organized workstations and adhere to ESD, safety, and traceability protocols.
Who You Are (Basic Qualifications)
* High school diploma or GED (technical/vocational training in electronics preferred).
* Minimum 1 year of hands-on experience in electronic assembly or related field.
* Ability to read and interpret electrical schematics, wiring diagrams, and assembly drawings; Entry-level understanding is acceptable.
* Comfortable using hand tools, microscopes, multimeters, and basic test equipment.
What Will Put You Ahead (Preferred Qualifications)
* IPC-610 / J-STD-001 certification for soldering and assembly standards
* Proven manual dexterity and visual acuity for fine pitch soldering and component placement.
* Experience with both through-hole and surface-mount assembly processes.
* Familiarity with automated optical inspection (AOI) and in-circuit testing (ICT) systems.
* Prior exposure to lean manufacturing or Six Sigma methodologies.
* Associate's degree in Electronics Technology or related discipline.
Who We Are
As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications.
The thousands of innovators who work for Molex have made us a global electronics leader.
Our experienced people, groundbreaking products and leading-edge technologies help us deliver a ...
....Read more...
Type: Permanent Location: Georgetown, US-TX
Salary / Rate: Not Specified
Posted: 2026-07-31 09:48:05
-
The Electrical Foreman is responsible for directly overseeing and coordinating the day-to-day work of self-perform electrical construction crews.
This role ensures work is executed safely, efficiently, and in accordance with project schedules, electrical codes, quality standards, and established procedures.
Current Project Site Opportunities Southwest Portfolio
* Potential Locations: El Paso, TX
* Location subject to change depending on business needs
Travel:Site based role with home trip rotations (typically every 3 - 4 weeks)
Compensation:$45 - $60/hour (flexible based on experience)
What You Will Do
* Lead and supervise day-to-day work activities for self-perform electrical crews to safely meet schedule, quality, and productivity expectations
* Plan and coordinate daily work, crew assignments, materials, tools, equipment, and subcontractor support as needed
* Monitor workmanship and productivity, ensuring electrical installations comply with plans, specifications, and applicable codes
* Address and resolve field issues related to safety, quality, labor, materials, or execution in real time
* Communicate progress, constraints, and needs with supervisors and project leadership, supporting efficient problem resolution
* Complete and track daily time, labor, and production reporting accurately and on time
Who You Are (Basic Qualifications)
* Experience in electrical construction, commercial, residential or utility with leadership or foreman-level responsibilities
* Experience leading small crews in a highly transactional, task-driven work environment
* Valid driver's license
What Will Put You Ahead
* Previous experience as a foreman or lead on self-perform electrical construction crews
* Experience coordinating subcontractors and managing electrical material and equipment logistics
* Strong working knowledge of electrical installation practices, safety requirements, and code compliance
* Bilingual (English/Spanish) communication skills preferred
At Koch companies, we are entrepreneurs.
This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions.
Any compensation range provided for a role is an estimate determined by available market data.
The actual amount may be higher or lower than the range provided considering each candidate's knowledge, skills, abilities, and geographic location.
If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.
Hiring Philosophy
All Koch companies value diversity of thought, perspectives, aptitudes, experiences, and backgrounds.
We are Military Ready and Second Chance employers.
Learn more about our hiring philosophy here .
Who We Are
As a Koch Engineered Solutions company, DEPCOM Power is a leading energy solutions partner for the utility solar, and broader energy industries, providing project devel...
....Read more...
Type: Permanent Location: EL Paso, US-TX
Salary / Rate: Not Specified
Posted: 2026-07-31 09:48:05
-
Your Job
Molex in Little Falls Minnesota is currently hiring for a Toolmaker.
Our Team
Analyzes specifications, sets up and operates machine tools, and fits and assembles parts to fabricate and repair metalworking dies and molds, cutting tools, jigs, and fixtures, gauges, and hand-tools.
What You Will Do
• Studies blueprints of product and die or mold and computes specifications.
• Plans sequence of operations, visualizing shape of die or mold in reverse of product.
• Measures, marks and scribes metal stock to lay out for machining.
• Gives machining specifications to Tool Machine Set Up Operators or sets up and operates machines such as vertical mill, engine lathe and CNC milling machine to machine outer dimensions and contoured cavity of die or mold.
• Uses surface grinder to fit parts for assembly and to smooth and finish cavity.
• Assembles die or mold.
Verifies dimensions.
• Examines standard or previously used dies or molds, tools, and jigs and fixtures, and recommends design modifications regarding construction and function of part.
• Keeps an accurate record of maintenance performed on all tools.
Who You Are (Basic Qualifications)
• Completion of a two year vocational, trade, or technical degree,
• Two to five years of related experience or training; and/or equivalent combination of education and experience.
• Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals.
• Ability to write routine reports and correspondence.
• Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
• Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
• Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.
• Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form.
• Knowledge of heat treating steels required.
At Koch companies, we are entrepreneurs.
This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions.
Any compensation range provided for a role is an estimate determined by available market data.
The actual amount may be higher or lower than the range provided considering each candidate's knowledge, skills, abilities, and geographic location.
If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.
Hiring Philosophy
All Koch companies value diversity of thought, perspectives, aptitudes, experiences, and backgrounds.
We are Military Ready and Second Chance employers.
Learn more about our hiring philosophy here .
Who We Are
At Koch, employees are empowered to do what they do best to make life better.
Learn how our business ph...
....Read more...
Type: Permanent Location: Little Falls, US-MN
Salary / Rate: Not Specified
Posted: 2026-07-31 09:48:04
-
Your Job
Koch Ag & Energy Solutions (KAES) is seeking a contribution-minded Senior Operations Finance Analyst to join the Koch Fertilizer operations finance team.
In this role, you will help leaders understand what is driving financial and operational performance across our manufacturing network and turn data, business activity, and cost trends into clear, decision-ready insights.
This role offers meaningful exposure to operations, planning, reporting, and cross-functional problem solving.
You will support finance cycles, improve how information is created and shared, and help the business make better decisions around reliability, production, cost, and long-term value creation.
Our Team
Koch Fertilizer is a growing leader in North American nitrogen production, with manufacturing sites across the U.S.
and Canada.
You will join a collaborative operations finance team that is close to the business, values curiosity and ownership, and is focused on improving how financial insights are created, shared, and used.
As part of the Koch Ag & Energy Solutions (KAES) and Koch Minerals & Trading (KMT) finance organization, the team partners across finance, operations, commercial, procurement, logistics, IT, and site teams to support accurate results, scalable reporting, and better business outcomes.
This position is located at the Wichita, KS headquarters and offers a flexible work schedule, with periodic travel to production sites as business needs arise.
What You Will Do
* Shape the financial story for operations by translating production, cost, reliability, and market drivers into insights that help leaders understand performance, anticipate risks, and identify opportunities.
* Support high-impact reporting and forecasting cycles, including monthly results analysis, forecast support, variance explanations, planning insights, and leadership-ready commentary.
* Partner within and across teams to improve data quality, align priorities, solve problems, and influence cross-functional initiatives.
* Modernize operations finance by using and learning tools such as Copilot/AI, Fabric, Power BI, Alteryx, SQL, or similar platforms to make reporting and analysis faster, clearer, and more sustainable
* Build team capability through mentorship, documentation, process ownership, cross-training, and knowledge sharing that connect strong execution to business impact.
Who You Are (Basic Qualifications)
* Bachelor's degree or higher in Finance, Accounting, Economics, Business, or a related field.
* Experience in finance, accounting, analytics, or business support, with a strong understanding of financial concepts.
* Ability to communicate financial and operational information clearly and accurately.
* Demonstrated ability to manage deadlines, solve problems, and deliver accurate work in time-sensitive situations.
* Experience leading with curiosity to drive profitable change in a collaborative team environment.
Wh...
....Read more...
Type: Permanent Location: Wichita, US-KS
Salary / Rate: Not Specified
Posted: 2026-07-31 09:48:03
-
Molex possesses a rich heritage in the optical industry.
We provide the highest performing and field-proven wavelength management solutions, from components and modules to integrated line-cards.
Continuous innovation in passive component function integration, miniaturization, and manufacturing automation, cutting edge WSS and amplify technology and comprehensive optical, mechanical, electrical and software integration capabilities enable us to serve the needs of high-density, high-bandwidth, and flexible optical networks.
Molex is rapidly growing in our Opto-E business, responsible for developing 1.6T, 3.2T and beyond.
In our Fremont office, we have a dedicated team of engineers.
We are looking for a Principal Test Engineer that will lead test development for high speed fiber optic 800G/1.6T/3.2T transceiver characterization from early prototypes, engineering samples, EVT/DVT testing to pilot production test definitions.
This Engineer will closely collaborate with design authority, hardware and firmware team leaders to develop module calibration algorithms for transmitters and receivers.
As the only manufacturer in North America, this person will have an impact on our high-speed optical interconnects and the growth of the company.
What You Will Do
* Device and module characterization for next generation optical transceivers for AI/ML applications.
These will be used in AI/ML scale-out and scale up networks.
* Build and strengthen transceiver characterization capability in the US through test equipment selections, test setups, DVT/EVT test and calibration methodologies
* Define module test definitions that are compliant to customer specifications, industry standards and product life cycle procedures
* Design the hardware and software of test platforms that are required for early engineering samples, EVT/DVT, and pilot productions.
The engineer will need to understand the test requirements at each development phase and balance equipment costs, test scopes and test times
* Work with project managers and purchasing departments to ensure test systems are completed as required by project milestones and meeting cost targets
* Perform test data analysis and summarization for wider development team to performance gap analysis
* Test support for failure mode analysis for failures from R&D and production phases.
Who You Are (Basic Qualifications)
* Bachelor's /Master's/PhD in Electrical Engineering or related engineering discipline.
* Minimum 3-7 years of experience in IMDD and coherent modules characterizations.
* Experience with transceiver module Device Verification Testing (DVT) activities.
* Hands on experience with Vector Network Analyzer and Digital Sampling Oscilloscope
* Experience with small signal frequency domain analysis, Continuous Time Linear Equalizer, Feed Forward Equalization, Digital Pre-emphasis
* Experience with test automation using python scripts
* Compete...
....Read more...
Type: Permanent Location: Fremont, US-CA
Salary / Rate: Not Specified
Posted: 2026-07-31 09:48:01
-
Your Job
Our Molex facility in Caldwell, Idaho is seeking Operators to join our team .
Operators at this site help build custom fiber optic bundles and cable assemblies used in medical, industrial, and other customer applications.
This is hands-on production work that involves following written instructions, handling small parts, and paying close attention to detail.
Previous fiber optic experience is not required.
We are looking for people who are dependable, willing to learn, and comfortable doing careful, detailed work in a team environment.
Day Shift: Monday-Thursday, 6:00am-3:30pm &Friday, 6:00am-10:00am
Our Team
Our Operator team works in a clean, well-lit, temperature-controlled production area.
The work is precise and can be repetitive, but training is provided.
Operators follow standard work instructions, use tools and microscopes to assemble and inspect product, and help make sure each part meets quality requirements before it moves to the next step.
What You Will Do
* Follow safety, quality, and work instruction requirements while building fiber optic products.
* Assemble, inspect, clean, or test small fiber optic parts and subassemblies.
* Use microscopes or other tools to inspect product surfaces and check for quality concerns.
* Handle delicate materials carefully and keep product organized as it moves through production.
* Document production steps, product movement, and any quality concerns as required.
* Keep the work area clean and help support continuous improvement in the production area.
Who You Are (Basic Qualifications)
* Legal authorization to work in the United States.
This role does not offer visa sponsorship.
What Will Put You Ahead
* Assembly experience.
* Experience working in a manufacturing, industrial, military, lab, or other hands-on work environment.
* Experience using small tools, microscopes, inspection equipment, or written work instructions.
This position does not qualify for VISA Sponsorship.
In order to comply with U.S.
export control laws and regulations, this position requires applicants to either provide proof of U.S.
citizenship or lawful permanent resident status or be eligible to receive an export authorization (a license) under the International Traffic in Arms Regulations and/or the Export Administration Regulations.
At Koch companies, we are entrepreneurs.
This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions.
Any compensation range provided for a role is an estimate determined by available market data.
The actual amount may be higher or lower than the range provided considering each candidate's knowledge, skills, abilities, and geographic location.
If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.
Hiring Philosophy
All Koch companies value diversity of thought, perspectives, aptitudes, experie...
....Read more...
Type: Permanent Location: Caldwell, US-ID
Salary / Rate: Not Specified
Posted: 2026-07-31 09:47:58
-
Your Job
Molex is seeking a dynamic and proactive Project Manager for our Transportation Solutions Business Unit (TSBU).
Our Project Management team leads global, cross functional teams through the design, validation, and implementation of our products into best-in-class manufacturing processes.
The role will lead execution of automotive connector projects based in our Rochester Hills, Michigan Design Center.
As a Project Manager, you are comfortable leading diverse, global, cross functional teams, working directly with customers, mentoring team members, solving problems, and being accountable for project-level decisions and the associated outcomes.
You have strong project management experience in technical manufacturing environments, specifically automotive supply.
The right fit candidate for this role will thrive on moving the needle to exceed business objectives that will take Molex and our customers to the next level.
What You Will Do
* Lead cross-functional teams to deliver project scope, meeting all defined performance metrics and customer/company requirements; timing, financials, quality, customer satisfaction.
* Hold team members accountable on all product development related deliverables and lead team to achieve flawless project launches at our manufacturing plants.
* Partner with the Plant Project Manager on product launch strategy and support as needed.
* Maintain good communication and documentation among project team members, departments, and customers.
* Maintain and improve project financials, including bill of materials cost, development and industrialization investments.
* Transparently and proactively report out to key stakeholders regarding project status, challenges, risks, and accomplishments.
Who You Are (Basic Qualifications)
* Bachelor's degree in engineering, manufacturing, or related field
* Proven capability to lead with a sense of ownership and accountability
* 3+ years work experience in product development, business, engineering, supply chain, quality, or manufacturing
* 3+ years of Project Management experience including managing multiple technical projects simultaneously and achieving the approved financials, quality, and timing targets.
* Development and launching a new product from concept through development and industrialization, safe launch and/or post launch phases.
* Affinity for problem solving, risk management and finding creative solutions to complex problems.
* Project management experience specifically within leading automotive product launches
* Ability to travel domestically and internationally as required.
What Will Put You Ahead
* Working experience of Automotive Product Development, Quality Management Systems, Advanced Quality Planning
* Strong working experience with MS Project, MS Office and workflow tools
* Engineering or Manufacturing degree or experience
* Experience working for an Automotive Ti...
....Read more...
Type: Permanent Location: Rochester Hills, US-MI
Salary / Rate: Not Specified
Posted: 2026-07-31 09:47:57
-
Your Job
You will play a critical role in overseeing and performing project management in operations and manufacturing engineering organization for Datacomm & Specialty Solutions Division.
You will ensure that projects in Proof of Concept lab, other key initiatives and programs are managed efficiently and effectively within manufacturing and operations, aligning with the organization's strategic goals and delivering value to our customers.
Our Team
We are a vibrant and collaborative team dedicated to turning strategic goals into reality.
Our team excels in strategic planning, resource management and risk optimization to ensure our projects deliver maximum value.
We believe in fostering a supportive and inclusive environment where every team member's ideas are celebrated and valued.
Visa sponsorship is not being offered for this role.
What You Will Do
* Project Management in Proof of Concept Lab and other initiatives.
* Project schedule development according to dependencies and priorities.
* Lead cross functionally through the execution, monitoring and achievement of project plan from Proof of Concept lab using Project Management methodologies.
* Proactively identify, document, and execute risk reduction activities to minimize project risks associated with cost, quality, and timing.
* Communicate status of assigned projects to internal and external stakeholders and escalate barries when identified.
* Review design packages, manufacturing designs, and processes with team members to identify opportunities for improvement.
* Oversee the adoption of new technologies and tools.
* Support digital transformation within the factory.
For this role, we anticipate paying $80,000 -$140,000 per year.
This role is eligible for variable pay, issued as a monetary bonus or in another form.
Who You Are (Basic Qualifications)
* Bachelor's degree in Business, Computer Science, Engineering or related technical discipline.
* Minimum of 5 years of portfolio management experience.
* Minimum of 5 years of experience in an operations or technical manufacturing environment.
* Experience working cross-functionally in a global matrixed organization.
What Will Put You Ahead
* PMP or other Project Management related certification.
* Fluency in oral and written Mandarin.
At Koch companies, we are entrepreneurs.
This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions.
Any compensation range provided for a role is an estimate determined by available market data.
The actual amount may be higher or lower than the range provided considering each candidate's knowledge, skills, abilities, and geographic location.
If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.
Hiring Philosophy
All Koch companies value diversity of thought, perspectives, aptitudes, experiences, a...
....Read more...
Type: Permanent Location: Lisle, US-IL
Salary / Rate: Not Specified
Posted: 2026-07-31 09:47:57
-
This position is responsible for safely providing off-campus transportation to Simpson University students.
Bus driver will drive university vehicles and will transport passengers to a specific destination as requested.
Hours and days will vary, depending on event schedules.
Qualifications: Must have and maintain a valid CA Commercial Driver's License (CDL), class A or class B Must be at least 21 years of age High school diploma or equivalent Must be able to provide and maintain proof of excellent driving record Minimum of six (6) months documented professional driving experience preferred Must have a service orientation to perform duties in a cooperative, efficient and energetic manner Ability to communicate effectively and professionally with employees, students and customers Must demonstrate integrity in the performance of all job duties Excellent problem solving and decision making skills Knowledge of DOT/CDL regulations Must be able to sit for long periods, while safely operating the vehicle General Expectations: Personal relationship with Jesus, a vibrant Christian faith, and a commitment to Christian community; capable of sharing faith and engaging in conversations about Christ Demonstrate Simpson University Values in the performance of all duties.
Maintain lifestyle in accordance with Simpson University Lifestyle Policy in Staff Handbook Maintain the confidentiality of information, data and records Properly exercise tact, diplomacy, discretion, and professional judgment Demonstrate strong customer service skills in the performance of job duties Demonstrate good organizational and communication skills in the performance of job duties Supervises employees in accordance with Simpson University policies and procedures Support the overflow needs of other departments within the respective university area Perform other duties in accordance with this position as deemed necessary by the immediate supervisor Essential Functions: Safely transport people driving buses for Simpson University events, taking into consideration road and traffic conditions, passenger safety and vehicle operational capacity Complete pre and post trip inspections results on appropriate forms, ensuring all forms are filled out properly for CDL paperwork.
This includes, but is not limited to recording passenger count, mileage, fuel, and other fluid usages and completes statistical summary by route Conducts pre and post trip safety inspections to confirm vehicles suitability for route completion, including tires, brakes, windshield wipers, lights, oil, fuel, and safety equipment.
Incumbent may add fluids, and perform other maintenance tasks if needed Responsible for keeping the interior of the bus clean and safe Physical Requirements: Job Title: Bus Driver Typical Working Conditions: (Describe environment including exposure to heat, cold, fumes, chemicals, allergens, mold, etc.) Exposure to heat and cold elements, environment primarily onboard University Bus but contingent ...
....Read more...
Type: Permanent Location: Redding, US-CA
Salary / Rate: Not Specified
Posted: 2026-07-31 09:47:56
