-
PRIMARY FUNCTION:
The primary function of this position it to perform advanced systems repair and assembly by performing independent trouble shooting using various diagnostic equipment and manuals.
ESSENTIAL DUTIES:
* Check the equipment and supplies required to perform the work scheduled, comply with PPE requirements, and otherwise prepare for duties.
* Uses manuals, repair manuals, parts manuals, parts diagrams to perform independent troubleshooting and repair of construction equipment.
* Uses lift trucks, overhead cranes, & other aides to lift or move parts into position to be repaired.
* Uses hand & power tools to remove, install, replace, re-build, repair, & test parts/equipment on construction equipment.
* Uses miscellaneous resources and computers to reference parts, get information about parts & enter data into record systems.
* Uses tools to disassemble/re assemble parts or equipment; cleans parts with rags, cleaners, power washer; uses test equipment to make diagnostic checks; and controls powered equipment or tools to make repairs.
* Climbs up onto, under, & into vehicles to gain access to all parts of vehicle.
* Uses overhead hoists, lift devices, forklifts & other aides to move items off vehicle (tracks, idler wheels, blades, etc.) & then to move parts to locations for disassembly, repair, then back to the vehicle for reassembly.
* Proficient at performing inspections, do preventative maintenance, repair engines, power train, hydraulic and electrical components.
* Lift/carry and position ram used to remove idlers, unbolt idlers, remove them with
* Uses power washers & spray paint equipment to clean & paint vehicle.
* Uses instruments and computers to reprogram equipment controllers.
MINIMUM REQUIREMENTS:
Education:
Must have a high school education or GED
Work Experience:
Requires four years of work experience with at least two years experience with CAT equipment; Must be proficient in at least two mechanical systems (i.e.
transmissions, engines, hydraulics, etc.) for numerous model lines.
Physical:
Must be able to daily and repeatedly stoop, kneel, bend and climb beside, onto and underneath various equipment to perform diagnosis and repairs; Must be able to effectively see to perform repairs, research technical manuals, and develop written repair work order reports. Must be able to routinely and physically lift/position various parts to perform repairs/service and manually handle parts up to 112 pounds, as well as use mechanical hoist for heavier parts.
Other:
Must be able to effectively write repair activities on customer work orders; Must have cognitive reasoning and problem solving skills to apply knowledge, written information and verbal instructions in repairing/servicing unusual and/or unknown technical equipment operational problems.
Should have exposure to P.C.
base equipment and parts information; Can work...
....Read more...
Type: Permanent Location: Raleigh, US-NC
Salary / Rate: Not Specified
Posted: 2025-03-27 07:21:36
-
PRIMARY FUNCTION:
The primary function of this position is to perform routine mechanical repairs on construction equipment
ESSENTIAL DUTIES:
* Check the equipment and supplies required to perform the work scheduled, comply with PPE requirements, and otherwise prepare for duties.
* Uses manuals, repair manuals, parts manuals, parts diagrams to troubleshoot construction equipment.
* Uses lift trucks, overhead cranes, & other aides to lift or move parts into position to be repaired.
* Uses hand & power tools to remove, install, replace, re-build, repair, & test parts/equipment on construction equipment.
* Uses miscellaneous resources and computers to reference parts, get information about parts & enter data into record systems.
* Uses tools to disassemble/re assemble parts or equipment; cleans parts with rags, cleaners, power washer; uses test equipment to make diagnostic checks; and controls powered equipment or tools to make repairs.
* Climbs up onto, under, & into vehicles to gain access to all parts of vehicle.
* Uses overhead hoists, lift devices, forklifts & other aides to move items off vehicle (tracks, idler wheels, blades, etc.) & then to move parts to locations for disassembly, repair, then back to the vehicle for reassembly.
* Performs inspections, do preventative maintenance, repair engines, power train, hydraulic and electrical components.
* Usespower washers & spray paint equipment to clean & paint vehicle.
* Uses instruments and computers to reprogram equipment controllers.
MINIMUM REQUIREMENTS:
Education:
Must have a high school education or GED.
Work Experience:
Requires up to two years schooling or direct work experience; Must be mechanically inclined and have good basic knowledge obtained through schooling or work experience.
Physical:
Must be able to daily and repeatedly stoop, kneel, bend and climb onto and underneath various equipment to perform diagnosis and repairs; Must be able to effectively see to perform repairs, research technical manuals, and develop written repair work order reports. Must be able to routinely and physically lift/position various parts to perform repairs/service and manually handle parts up to 112 pounds, as well as use mechanical hoist for heavier parts.
Other:
Must be able to effectively write repair activities on customer work orders; Must have cognitive reasoning and problem-solving skills to apply knowledge, written information and verbal instructions in repairing/servicing unusual and/or unknown technical equipment operational problems; Should have exposure to P.C.
base equipment and parts information; Capable of learning and understanding technical information, service manuals and reports.
This job description is not intended to be all-inclusive. Your supervisor may request and assign you similar duties. Any major modification of this job role requires Human Resources approval.
....Read more...
Type: Permanent Location: Garner, US-NC
Salary / Rate: 21.525
Posted: 2025-03-27 07:21:31
-
PRIMARY FUNCTION:
The primary function of this position is to determine the status of service needed for truck engines and components and perform advanced repairs, replacements, installations, or re-building of parts to restore the engine to the proper operation.
ESSENTIAL DUTIES:
* Review the work schedule, check the equipment and supplies required to perform the work scheduled, comply with PPE requirements, and otherwise prepare for duties.
* Use manuals, repair manuals, parts manuals, parts diagrams to troubleshoot engines, engine fuel systems, & transmissions.
* Use lift trucks, overhead cranes, & other aides to lift or move parts into position to be repaired.
* Use hand & power tools to remove, install, replace, re-build, repair, & test.
* Use miscellaneous resources & computers to reference parts, get information about parts & enter data into record systems.
* Use hand & power tools to disassemble/re assemble parts or equipment, drains fluids into tubs, cleans parts with rags, cleaners, power washer.
* Cliimb up onto, under, & into vehicle engine, uses hand & power tools to disassemble/re assemble: sheet metal, engines, transmissions, fuel systems, & other parts or equipment.
* Replace pumps, batteries, radiators (200 lb.
with assistance), bearings, seals, wiring, solenoids, fuel lines, nozzles, tests float valves, glow plugs, alternators.
* Use overhead hoists on service truck to move parts that need to be moved off of vehicle & onto service truck & to move items back to vehicle to be reassembled.
* Use meters, measuring devices, & computers to test & recalibrate equipment.
* Perform inspections, do preventative maintenance, change oil, replace filters, belts, coolants, hoses, may drain/clean/refill fuel systems.
MINIMUM REQUIREMENTS:
Education:
Must have a high school education or GED.
Work Experience:
Six years of experience with at least four years of experience with Cat equipment.
Must be proficient in at least four mechanical systems (i.e.
transmissions, engines, hydraulics, etc.) for numerous model lines.
Physical:
Must be able to daily and repeatedly stoop, kneel, bend and climb beside, onto and underneath various equipment to perform diagnosis and repairs.
Must be able to effectively see to perform repairs, research technical manuals, and develop written repair work order reports.
Must be able to routinely and physically lift/position various parts to perform repairs/service and manually handle parts up to 110 pounds, as well as use mechanical hoist for heavier parts.
Other:
Must be able to effectively write repair activities on customer work orders.
Must have cognitive reasoning and problem solving skills to apply knowledge, written information and verbal instructions in repairing/servicing unusual and/or unknown technical equipment operational problems.
Should have exposure to P.C.
base equipment and parts information; Can work independently with minimal supervision...
....Read more...
Type: Permanent Location: Garner, US-NC
Salary / Rate: Not Specified
Posted: 2025-03-27 07:21:30
-
PRIMARY FUNCTION:
The Master Engine Rebuild Technician is responsible for the set-up, disassembly/re-assembly, overhaul, and rebuild of Mack, Cummins, and/or Caterpillar diesel and natural gas-powered on-highway truck engines and related components.
ESSENTIAL DUTIES:
* Review the work schedule, check the equipment and supplies required to perform the work scheduled, comply with PPE requirements, and otherwise prepare for duties.
* Perform disassembly, inspection, rebuilding, and/or re-assembly of diesel and natural gas-powered on-highway truck engine systems and components, including but not limited to powertrain pumps, motors, and hydraulics components) in accordance with all prescribed quality and safety standards.
* Research and determine the reusability of parts in accordance with published manufacturer guidelines.
* Coordinate the ordering of replacement parts with a designated point of contact.
* Test, measure, and adjust engine systems and components.
Therein, identify the cause of failure through logical troubleshooting steps and failure analysis.
* Prepare and submit detailed, complete, and legible service reports of all inspections and actions performed using prescribed forms and procedures in a timely manner.
* Troubleshoot and test engines in the frame to determine the root cause of failure, and quote needed parts and labor to perform needed engine repairs.
* Remove engines from vehicles as required to perform out-of-frame overhauls.
* Install engines in vehicles after repairs and overhauls.
* Perform post-installation testing, adjusting, and repairs as necessary.
* Keep supervisor regularly apprised of the status of assigned work and assist in addressing customer questions and concerns.
* Maintain work area, tools, and equipment to promote a clean and safe environment.
* Keep up to date with developments in tooling, technologies, and systems.
MINIMUM REQUIREMENTS:
Education:
Must have a high school education or GED.
Work Experience:
Eight years of experience with at least four years of experience as a service technician working on Caterpillar, Cummins, Detroit, Mack or similar on-highway truck engines. Diagnostic and troubleshooting experience with multiple engine types, models and manufacturers.
Physical:
Must be able to daily and repeatedly stoop, kneel, bend and climb beside, onto and underneath various equipment to perform diagnosis and repairs.
Must be able to effectively see to perform repairs, research technical manuals, and develop written repair work order reports. Must be able to routinely and physically lift/position various parts to perform repairs/service and manually handle parts up to 117 pounds, as well as use a mechanical hoist as needed.
Other:
Must be able to effectively write repair activities on customer work orders.
Must have problem-solving skills to apply knowledge, written information and verbal...
....Read more...
Type: Permanent Location: Garner, US-NC
Salary / Rate: 36
Posted: 2025-03-27 07:21:28
-
PRIMARY FUNCTION:
The primary responsibility of this position is to independently perform a variety of troubleshooting, diagnostic and advance EPG repairs at customer sites.
ESSENTIAL DUTIES:
* Must be well versed in the troubleshooting and repair diesel/natural gas & LP engines and engine ECMs.
* Must be able to troubleshoot DC control panels, auxiliary display units, governors, and actuators.
* Read and comprehend a/c and d/c schematics as they relate to engine / site specific installations.
* Perform preventive maintenance and services on a wide variety of gensets and commercial engines, to include non-Cat product.
* Candidate must be aware and conscious of all safety factors revolving around circuits at high power levels.
Must adhere to all company safety policies and the EPG safety work policy.
Failure to do so can affect employment status.
* Manage personal work schedule (to include billing out time with limited expense hours, completing and submitting associated paperwork, i.e.: timecard, service reports, warranty related information, completion of core and/or warranty tags for failed parts, lookup and submission of needed parts orders.
* Candidate must properly maintain all assigned company property and submits all expense records on a monthly basis.
* Candidate must be able to attend training courses relative to job position as needed, monthly Pure Safety and notify supervisor of training needs on an ongoing basis.
MINIMUM REQUIREMENTS:
Education:
Must have a high school education or GED.
Work Experience:
Six years of experience with at least two years of experience on Cat engines and / or like competitive equipment.
Physical:
Must be able to daily and repeatedly stoop, kneel, bend and climb beside, onto and underneath various equipment to perform diagnosis and repairs.
Must be able to effectively see to perform repairs, research technical manuals, and develop written repair work order reports.
Must be able to routinely and physically lift/position various parts to perform repairs/service and manually handle parts up to 137 pounds, as well as use mechanical hoist for heavier parts.
Other:
Will work remotely with rare trips to dispatching office.
Must be able to effectively write repair activities on customer work orders.
Must have cognitive reasoning and problem solving skills to apply knowledge, written information and verbal instructions in repairing/servicing unusual and/or unknown technical equipment operational problems.
Should have exposure to P.C.
base equipment and parts information; can work independently with minimal supervision.
Ability to interface with customers (both internal & external) effectively and courteously
Field Activity:
Must be able to daily operate an assigned service vehicle as well as be prequalified to operate under GPEC Fleet Policy Standards.
The driver must be able to operate their assigned vehicle for extended periods in order to reach customer’s l...
....Read more...
Type: Permanent Location: Garner, US-NC
Salary / Rate: Not Specified
Posted: 2025-03-27 07:21:26
-
PRIMARY FUNCTION:
The primary function of this position is to perform routine mechanical repairs on truck engines
ESSENTIAL DUTIES:
Review the work schedule, check the equipment and supplies required to perform the work scheduled, comply with PPE requirements, and otherwise prepare for duties.
Use manuals, repair manuals, parts manuals, parts diagrams to troubleshoot engines, engine fuel systems, & transmissions.
Use lift trucks, overhead cranes, & other aides to lift or move parts into position to be repaired.
Use hand & power tools to remove, install, replace, re-build, repair, & test
Use miscellaneous resources & computers to reference parts, get information about parts & enter data into record systems.
Use hand & power tools to disassemble/re assemble parts or equipment, drains fluids into tubs, cleans parts with rags, cleaners, power washer.
Cliimb up onto, under, & into vehicle engine, uses hand & power tools to disassemble/re assemble: sheet metal, engines, transmissions, fuel systems, & other parts or equipment.
Replace pumps, batteries, radiators (200 lb.
with assistance), bearings, seals, wiring, solenoids, fuel lines, nozzles, tests float valves, glow plugs, alternators.
Use overhead hoists on service truck to move parts that need to be moved off of vehicle & onto service truck & to move items back to vehicle to be reassembled.
Use meters, measuring devices, & computers to test & recalibrate equipment.
Perform inspections, do preventative maintenance, change oil, replace filters, belts, coolants, hoses, may drain/clean/refill fuel systems.
MINIMUM REQUIREMENTS:
Education:
Must have a high school education or GED.
Work Experience:
Two years direct work experience or equivalent
Physical:
Must be able to daily and repeatedly stoop, kneel, bend and climb beside, onto and underneath various equipment to perform diagnosis and repairs.
Must be able to effectively see to perform repairs, research technical manuals, and develop written repair work order reports.
Must be able to routinely and physically lift/position various parts to perform repairs/service and manually handle parts up to 117 pounds, as well as use mechanical hoist for heavier parts.
Other:
Must be able to effectively write repair activities on customer work orders.
Must have cognitive reasoning and problem solving skills to apply knowledge, written information and verbal instructions in repairing/servicing unusual and/or unknown technical equipment operational problems.
Should have exposure to P.C.
base equipment and parts information;
This job description is not intended to be all-inclusive.
Your supervisor may request and assign you similar duties.
Any major modification of this job role requires Human Resources approval.
....Read more...
Type: Permanent Location: Garner, US-NC
Salary / Rate: Not Specified
Posted: 2025-03-27 07:21:19
-
The primary function of this position is to troubleshoot, remove, install, replace, rebuild, repair, and test parts/equipment on construction equipment at an advanced level while working in the field.
ESSENTIAL DUTIES:
Check the equipment and supplies required to perform the work scheduled, comply with PPE requirements, and otherwise prepare for duties.
Uses manuals, repair manuals, parts manuals, and parts diagrams to troubleshoot construction equipment.
Uses lift trucks, overhead cranes, and other aids to lift or move parts into position to be repaired.
Uses hand and power tools to remove, install, replace, rebuild, repair, and test parts/equipment on construction equipment.
Uses multiple resources and computers to reference parts, get information about parts, and enter data into record systems.
Uses tools to disassemble/reassemble parts or equipment; cleans parts with rags, cleaners, power washer; uses test equipment to make diagnostic checks; and uses powered equipment or tools to make repairs.
Climbs up onto, under, and into vehicles to gain access to all parts of vehicle.
Uses overhead hoists, lift devices, forklifts, and other aids to move items off vehicle (tracks, idler wheels, blades, etc.), and then to move parts to locations for disassembly, repair, then back to the vehicle for reassembly.
Performs inspections, do preventative maintenance, change oil, replace filters, belts, coolants, hoses, may drain/clean/refill fuel systems.
Uses welders to weld frames and use power grinders to grind welds smooth.
Lift/carry and position hydraulic rams used to install press fit items.
Uses power washers and spray paint equipment to clean and paint vehicle.
Uses instruments and computers to reprogram equipment controllers.
MINIMUM REQUIREMENTS:
Education:
Must have a high school education or GED.
Work Experience:
Six years of experience with at least two years of experience on Cat equipment or other similar equipment.
Must be proficient in at least two mechanical systems (i.e.
transmissions, engines, hydraulics, etc.) for numerous model lines.
Physical:
Must be able to daily and repeatedly stoop, kneel, bend and climb beside, onto, and underneath various equipment to perform diagnosis and repairs.
Must be able to effectively see to perform repairs, research technical manuals, and develop written repair work order reports.
Must be able to routinely and physically lift/position various parts to perform repairs/service and manually handle parts up to 112 pounds, as well as use mechanical hoist for heavier parts.
Other:
Must be able to effectively document repair activities on customer work orders.
Must have cognitive reasoning and problem solving skills to apply knowledge, written information, and verbal instructions in repairing/servicing unusual and/or unknown technical equipment operational problems.
Should have basic proficiency using P.C.
base equipment and parts information.
Can work independently with minimal supervision....
....Read more...
Type: Permanent Location: Hanahan, US-SC
Salary / Rate: 27.525
Posted: 2025-03-27 07:20:51
-
PRIMARY FUNCTION:
The primary function of this position is to perform expert level repairs on material handling equipment by trouble shooting using diagnostic equipment and manuals while working in the field.
ESSENTIAL DUTIES:
* Review the work schedule, check the equipment and supplies required to perform the work scheduled, comply with PPE requirements, and otherwise prepare for duties.
* Use manuals, repair manuals, parts manuals, parts diagrams to troubleshoot engines, engine fuel systems, transmissions, or other components on material handling equipment.
* Use lift trucks, overhead cranes, & other aides to lift or move parts into position to be repaired.
* Use hand & power tools to remove, install, replace, re-build, repair, & test parts/equipment on engines, engine fuel systems, transmissions, & other components.
* Use miscellaneous resources & computers to reference parts, get information about parts & enter data into record systems.
* Use hand & power tools to disassemble/re assemble parts or equipment, drains fluids into tubs, cleans parts with rags, cleaners, power washer.
* Climb up onto, under, & into vehicles, uses hand & power tools to disassemble/re assemble: sheet metal, engines, transmissions, fuel systems, & other parts or equipment.
* Replaces pumps, batteries, radiators, bearings, seals, wiring, solenoids, fuel lines, nozzles, tests float valves, glow plugs, alternators.
* Use overhead hoists to move parts that need to be moved off of & back onto the material handling vehicle.
* Use meters, measuring devices, & computers to test & recalibrate equipment, completes warranty paperwork.
* Perform inspections, do preventative maintenance, change oil, replace filters, belts, coolants, hoses, may drain/clean/refill fuel systems.
MINIMUM REQUIREMENTS:
Education:
Must have a high school education or GED.
Work Experience:
Six years of experience on Yale, Clark or other similar equipment; Fully understands all equipment systems (i.e.
engines, hydraulics, electrical, sub-electrical, transmissions, etc.) for almost all equipment model lines.
Physical:
Must be able to daily and repeatedly stoop, kneel, bend and climb onto and underneath various equipment to perform diagnosis and repairs.
Must be able to effectively see to perform repairs, research technical manuals, and develop written repair work order reports.
Must be able to routinely and physically lift/position various parts to perform repairs/service and manually handle parts up to 95 pounds, as well as use mechanical hoist for heavier parts.
Other:
Must be able to effectively write repair activities on customer work orders.
Must have cognitive reasoning and problem-solving skills to apply knowledge, written information and verbal instructions in repairing/servicing unusual and/or unknown technical equipment operational problems.
Should have exposure to P.C.
base equipment and parts information; Can work independentl...
....Read more...
Type: Permanent Location: Roanoke, US-VA
Salary / Rate: Not Specified
Posted: 2025-03-27 07:20:46
-
PRIMARY FUNCTION:
The primary function of this position is to independently perform advanced repairs on material handling equipment to the customer’s satisfaction while in the field.
Perform necessary service, preventative maintenance, repairs, replacements, installations, or re-building of components to restore material handling equipment to proper operation.
ESSENTIAL DUTIES:
* Review the work schedule, check the equipment and supplies required to perform the work scheduled, comply with PPE requirements, and otherwise prepare for duties.
* Use repair manuals, parts manuals, and parts diagrams to troubleshoot engines, engine fuel systems, transmissions, or other components on material handling equipment.
* Load service truck with parts & equipment needed for field repairs to material handling equipment.
* Use lift trucks, hoist on truck, & other aides to lift or move parts into position to be repaired.
* Use hand & power tools to remove, install, replace, re-build, repair, & test parts/equipment on engines, engine fuel systems, transmissions, & other components.
* Perform all necessary safety checks on the equipment per procedures & policy.
* Use miscellaneous resources & computers to reference parts, get information about parts & enter data into record systems.
* Use hand & power tools to disassemble/re assemble parts or equipment, drains fluids into tubs, cleans parts with rags, cleaners.
* Climb up onto, under, & into vehicles, uses hand & power tools to disassemble/re assemble: sheet metal, engines, transmissions, fuel systems, & other parts or equipment.
* Replace pumps, batteries, radiators, bearings, seals, wiring, solenoids, fuel lines, nozzles, tests float valves, glow plugs, alternators.
* Use hoists on service truck to move parts that need to be moved off of vehicle & onto service truck & to move items back to vehicle to be reassembled.
* Use meters, measuring devices, & computers to test & recalibrate equipment, trains operators when necessary, completes warranty paperwork.
* Perform inspections, do preventative maintenance, change oil, replace filters, belts, coolants, hoses, may drain/clean/refill fuel systems.
MINIMUM REQUIREMENTS:
Education:
Must have a high school education or GED.
Work Experience:
Six years of experience with at least two years of experience on Hyster, Yale, Clark or other similar equipment; Must be proficient in at least two mechanical systems (i.e.
transmissions, engines, hydraulics, etc.) for numerous model lines.
Physical:
Must be able to daily and repeatedly stoop, kneel, bend and climb beside, onto and underneath various equipment to perform diagnosis and repairs.
Must be able to effectively see to perform repairs, research technical manuals, and develop written repair work order reports.
Must be able to routinely and physically lift/position various parts to perform repairs/service and manually handle parts up to 95 pounds, as...
....Read more...
Type: Permanent Location: Roanoke, US-VA
Salary / Rate: Not Specified
Posted: 2025-03-27 07:20:30
-
PRIMARY FUNCTION:
The primary function of this position is to independently perform advanced repairs on material handling equipment to the customer’s satisfaction while in the field.
Perform necessary service, preventative maintenance, repairs, replacements, installations, or re-building of components to restore material handling equipment to proper operation.
ESSENTIAL DUTIES:
* Review the work schedule, check the equipment and supplies required to perform the work scheduled, comply with PPE requirements, and otherwise prepare for duties.
* Use repair manuals, parts manuals, and parts diagrams to troubleshoot engines, engine fuel systems, transmissions, or other components on material handling equipment.
* Load service truck with parts & equipment needed for field repairs to material handling equipment.
* Use lift trucks, hoist on truck, & other aides to lift or move parts into position to be repaired.
* Use hand & power tools to remove, install, replace, re-build, repair, & test parts/equipment on engines, engine fuel systems, transmissions, & other components.
* Perform all necessary safety checks on the equipment per procedures & policy.
* Use miscellaneous resources & computers to reference parts, get information about parts & enter data into record systems.
* Use hand & power tools to disassemble/re assemble parts or equipment, drains fluids into tubs, cleans parts with rags, cleaners.
* Climb up onto, under, & into vehicles, uses hand & power tools to disassemble/re assemble: sheet metal, engines, transmissions, fuel systems, & other parts or equipment.
* Replace pumps, batteries, radiators, bearings, seals, wiring, solenoids, fuel lines, nozzles, tests float valves, glow plugs, alternators.
* Use hoists on service truck to move parts that need to be moved off of vehicle & onto service truck & to move items back to vehicle to be reassembled.
* Use meters, measuring devices, & computers to test & recalibrate equipment, trains operators when necessary, completes warranty paperwork.
* Perform inspections, do preventative maintenance, change oil, replace filters, belts, coolants, hoses, may drain/clean/refill fuel systems.
MINIMUM REQUIREMENTS:
Education:
Must have a high school education or GED.
Work Experience:
Six years of experience with at least two years of experience on Hyster, Yale, Clark or other similar equipment; Must be proficient in at least two mechanical systems (i.e.
transmissions, engines, hydraulics, etc.) for numerous model lines.
Physical:
Must be able to daily and repeatedly stoop, kneel, bend and climb beside, onto and underneath various equipment to perform diagnosis and repairs.
Must be able to effectively see to perform repairs, research technical manuals, and develop written repair work order reports.
Must be able to routinely and physically lift/position various parts to perform repairs/service and manually handle parts up to 95 poun...
....Read more...
Type: Permanent Location: Chesapeake, US-VA
Salary / Rate: Not Specified
Posted: 2025-03-27 07:20:29
-
PRIMARY FUNCTION:
The primary function of this position is to perform expert level repairs on material handling equipment by trouble shooting using diagnostic equipment and manuals while working in the field.
ESSENTIAL DUTIES:
* Review the work schedule, check the equipment and supplies required to perform the work scheduled, comply with PPE requirements, and otherwise prepare for duties.
* Use manuals, repair manuals, parts manuals, parts diagrams to troubleshoot engines, engine fuel systems, transmissions, or other components on material handling equipment.
* Use lift trucks, overhead cranes, & other aides to lift or move parts into position to be repaired.
* Use hand & power tools to remove, install, replace, re-build, repair, & test parts/equipment on engines, engine fuel systems, transmissions, & other components.
* Use miscellaneous resources & computers to reference parts, get information about parts & enter data into record systems.
* Use hand & power tools to disassemble/re assemble parts or equipment, drains fluids into tubs, cleans parts with rags, cleaners, power washer.
* Climb up onto, under, & into vehicles, uses hand & power tools to disassemble/re assemble: sheet metal, engines, transmissions, fuel systems, & other parts or equipment.
* Replaces pumps, batteries, radiators, bearings, seals, wiring, solenoids, fuel lines, nozzles, tests float valves, glow plugs, alternators.
* Use overhead hoists to move parts that need to be moved off of & back onto the material handling vehicle.
* Use meters, measuring devices, & computers to test & recalibrate equipment, completes warranty paperwork.
* Perform inspections, do preventative maintenance, change oil, replace filters, belts, coolants, hoses, may drain/clean/refill fuel systems.
MINIMUM REQUIREMENTS:
Education:
Must have a high school education or GED.
Work Experience:
Six years of experience on Yale, Clark or other similar equipment; Fully understands all equipment systems (i.e.
engines, hydraulics, electrical, sub-electrical, transmissions, etc.) for almost all equipment model lines.
Physical:
Must be able to daily and repeatedly stoop, kneel, bend and climb beside, onto and underneath various equipment to perform diagnosis and repairs.
Must be able to effectively see to perform repairs, research technical manuals, and develop written repair work order reports. Must be able to routinely and physically lift/position various parts to perform repairs/service and manually handle parts up to 95 pounds, as well as use mechanical hoist for heavier parts.
Other:
Must be able to effectively write repair activities on customer work orders.
Must have cognitive reasoning and problem solving skills to apply knowledge, written information and verbal instructions in repairing/servicing unusual and/or unknown technical equipment operational problems.
Should have exposure to P.C.
base equipment and ...
....Read more...
Type: Permanent Location: Richmond, US-VA
Salary / Rate: Not Specified
Posted: 2025-03-27 07:20:27
-
PRIMARY FUNCTION:
The primary function of this position is to perform advanced repairs on materials handling equipment. Perform necessary service, preventative maintenance, repairs, replacements, installations, or re-building of components to restore material handling equipment to proper operation.
ESSENTIAL DUTIES:
* Review the work schedule, check the equipment and supplies required to perform the work scheduled, comply with PPE requirements, and otherwise prepare for duties.
* Use manuals, repair manuals, parts manuals, parts diagrams to troubleshoot engines, engine fuel systems, transmissions, or other components on material handling equipment.
* Use lift trucks, overhead cranes, & other aides to lift or move parts into position to be repaired.
* Use hand & power tools to remove, install, replace, re-build, repair, & test parts/equipment on engines, engine fuel systems, transmissions, & other components.
* Use miscellaneous resources & computers to reference parts, get information about parts & enter data into record systems.
* Use hand & power tools to disassemble/re assemble parts or equipment, drains fluids into tubs, cleans parts with rags, cleaners, power washer.
* Climb up onto, under, & into vehicles, uses hand & power tools to disassemble/re assemble: sheet metal, engines, transmissions, fuel systems, & other parts or equipment.
* Replaces pumps, batteries, radiators, bearings, seals, wiring, solenoids, fuel lines, nozzles, tests float valves, glow plugs, alternators.
* Use overhead hoists to move parts that need to be moved off of & back onto the material handling vehicle.
* Use meters, measuring devices, & computers to test & recalibrate equipment, completes warranty paperwork.
* Perform inspections, do preventative maintenance, change oil, replace filters, belts, coolants, hoses, may drain/clean/refill fuel systems.
MINIMUM REQUIREMENTS:
Education:
Must have a high school education or GED.
Work Experience:
Six years of experience with at least two years of experience on Yale, Clark or other similar equipment; Must be proficient in at least two mechanical systems (i.e.
transmissions, engines, hydraulics, etc.) for numerous model lines.
Physical:
Must be able to daily and repeatedly stoop, kneel, bend and climb beside, onto and underneath various equipment to perform diagnosis and repairs.
Must be able to effectively see to perform repairs, research technical manuals, and develop written repair work order reports. Must be able to routinely and physically lift/position various parts to perform repairs/service and manually handle parts up to 95 pounds, as well as use mechanical hoist for heavier parts.
Other:
Must be able to effectively write repair activities on customer work orders.
Must have cognitive reasoning and problem solving skills to apply knowledge, written information and verbal instructions in repairing/servicing unu...
....Read more...
Type: Permanent Location: Chesapeake, US-VA
Salary / Rate: Not Specified
Posted: 2025-03-27 07:20:25
-
PRIMARY FUNCTION:
The primary function of this position is to perform expert level repairs on material handling equipment by trouble shooting using diagnostic equipment and manuals.
ESSENTIAL DUTIES:
Review the work schedule, check the equipment and supplies required to perform the work scheduled, comply with PPE requirements, and otherwise prepare for duties.
Use manuals, repair manuals, parts manuals, parts diagrams to troubleshoot engines, engine fuel systems, transmissions, or other components on material handling equipment.
Use lift trucks, overhead cranes, & other aides to lift or move parts into position to be repaired.
Use hand & power tools to remove, install, replace, re-build, repair, & test parts/equipment on engines, engine fuel systems, transmissions, & other components.
Use miscellaneous resources & computers to reference parts, get information about parts & enter data into record systems.
Use hand & power tools to disassemble/re assemble parts or equipment, drains fluids into tubs, cleans parts with rags, cleaners, power washer.
Climb up onto, under, & into vehicles, uses hand & power tools to disassemble/re assemble: sheet metal, engines, transmissions, fuel systems, & other parts or equipment.
Replaces pumps, batteries, radiators, bearings, seals, wiring, solenoids, fuel lines, nozzles, tests float valves, glow plugs, alternators.
Use overhead hoists to move parts that need to be moved off of & back onto the material handling vehicle.
Use meters, measuring devices, & computers to test & recalibrate equipment, completes warranty paperwork.
Perform inspections, do preventative maintenance, change oil, replace filters, belts, coolants, hoses, may drain/clean/refill fuel systems.
Education:
Must have a high school education or GED.
Work Experience:
Eight years of experience on Yale, Clark or other similar equipment; Fully understands all equipment systems (i.e.
engines, hydraulics, electrical, sub-electrical, transmissions, etc.) for almost all equipment model lines.
Physical:
Must be able to daily and repeatedly stoop, kneel, bend and climb beside, onto and underneath various equipment to perform diagnosis and repairs.
Must be able to effectively see to perform repairs, research technical manuals, and develop written repair work order reports.
Must be able to routinely and physically lift/position various parts to perform repairs/service and manually handle parts up to 95 pounds, as well as use mechanical hoist for heavier parts.
Other:
Must be able to effectively write repair activities on customer work orders.
Must have cognitive reasoning and problem solving skills to apply knowledge, written information and verbal instructions in repairing/servicing unusual and/or unknown technical equipment operational problems.
Should have exposure to P.C.
base equipment and parts information; Can work independently with minimal supervision.
Promotes excellent customer service and/or training on work assignments.
This...
....Read more...
Type: Permanent Location: Richmond, US-VA
Salary / Rate: Not Specified
Posted: 2025-03-27 07:20:24
-
PRIMARY FUNCTION:
The primary function of this position is to independently perform all major repairs to material handling equipment to the customer’s satisfaction while in the field.
Perform necessary service, preventative maintenance, repairs, replacements, installations, or re-building of components to restore material handling equipment to proper operation.
DIMENSIONS:
ESSENTIAL DUTIES:
* Review the work schedule, check the equipment and supplies required to perform the work scheduled, comply with PPE requirements, and otherwise prepare for duties.
* Use repair manuals, parts manuals, and parts diagrams to troubleshoot engines, engine fuel systems, transmissions, or other components on material handling equipment.
* Load service truck with parts & equipment needed for field repairs to material handling equipment.
* Use lift trucks, hoist on truck, & other aides to lift or move parts into position to be repaired.
* Use hand & power tools to remove, install, replace, re-build, repair, & test parts/equipment on engines, engine fuel systems, transmissions, & other components.
* Perform all necessary safety checks on the equipment per procedures & policy.
* Use miscellaneous resources & computers to reference parts, get information about parts & enter data into record systems.
* Use hand & power tools to disassemble/re assemble parts or equipment, drains fluids into tubs, cleans parts with rags, cleaners.
* Climb up onto, under, & into vehicles, uses hand & power tools to disassemble/re assemble: sheet metal, engines, transmissions, fuel systems, & other parts or equipment.
* Replace pumps, batteries, radiators, bearings, seals, wiring, solenoids, fuel lines, nozzles, tests float valves, glow plugs, alternators.
* Use hoists on service truck to move parts that need to be moved off of vehicle & onto service truck & to move items back to vehicle to be reassembled.
* Use meters, measuring devices, & computers to test & recalibrate equipment, trains operators when necessary, completes warranty paperwork.
* Perform inspections, do preventative maintenance, change oil, replace filters, belts, coolants, hoses, may drain/clean/refill fuel systems.
MINIMUM REQUIREMENTS:
Education:
Must have a high school education or GED.
Work Experience:
Six years of experience with at least two years of experience on Hyster, Yale, Clark or other similar equipment; Must be advanced in at least four mechanical systems (i.e.
transmissions, engines, hydraulics, etc.) for numerous model lines.
Physical:
Must be able to daily and repeatedly stoop, kneel, bend and climb beside, onto and underneath various equipment to perform diagnosis and repairs.
Must be able to effectively see to perform repairs, research technical manuals, and develop written repair work order reports.
Must be able to routinely and physically lift/position various parts to perform repairs/service and manually handle parts up to ...
....Read more...
Type: Permanent Location: Richmond, US-VA
Salary / Rate: Not Specified
Posted: 2025-03-27 07:20:20
-
At Johnson & Johnson, we believe health is everything.
Our strength in healthcare innovation empowers us to build a world where complex diseases are prevented, treated, and cured, where treatments are smarter and less invasive, and solutions are personal. Through our expertise in Innovative Medicine and MedTech, we are uniquely positioned to innovate across the full spectrum of healthcare solutions today to deliver the breakthroughs of tomorrow, and profoundly impact health for humanity. Learn more at https://www.jnj.com
Job Function:
Supply Chain Planning
Job Sub Function:
Planning Strategy & Capabilities
Job Category:
People Leader
All Job Posting Locations:
Zug, Switzerland
Job Description:
About Innovative Medicine
Our expertise in Innovative Medicine is informed and inspired by patients, whose insights fuel our science-based advancements.
Visionaries like you work on teams that save lives by developing the medicines of tomorrow.
Join us in developing treatments, finding cures, and pioneering the path from lab to life while championing patients every step of the way.
Learn more at https://www.jnj.com/innovative-medicine
Please note that this role is available across multiple countries and may be posted under different requisition numbers to comply with local requirements.
While you are welcome to apply to any or all of the postings, we recommend focusing on the specific country(s) that align with your preferred location(s):
Zug, Switzerland - Requisition Number: 2506234602W
Titusville NJ, Raritan NJ, Spring House PA, Malvern PA, US - Requisition Number: R-006078.
Remember, whether you apply to one or all of these requisition numbers, your applications will be considered as a single submission.
#Li-Hybrid
We are searching for the best talent for Head of Value Chain Excellence to be in Zug, Switzerland or Titusville NJ, Raritan NJ, Spring House PA, Malvern PA, US.
Purpose: Head of Value Chain Excellence (VCEx) is responsible for the enablement of the Value Chain Management (VCM) processes & deliverables; leads specific e2e digital programs and owns specific e2e business processes.
You will be responsible for:
The VCEx role is a strategic role with responsibility to create and maintain the VCM strategy, the VCM process decomposition and the continuous improvement of key e2e supply chain processes.
The role will also consolidate the investment picture for VCM and facilitate the LRFP and BP process.
The role will lead digital programs for VCM and E2E supply chain.
As this moment this includes digital value chain, product information management and tiered performance management.
These programs have the purpose to effectively enable the business processes of the future.
The third pillar of this roles is the ownership of specific e2e business processes for Innovative Medicine Supply Chain (IMSC).
This role has responsibility over Supply Chain Reliability, E2E performance management and Supply Chain resiliency.
Suppl...
....Read more...
Type: Permanent Location: Zug, CH-ZG
Salary / Rate: Not Specified
Posted: 2025-03-27 07:11:28
-
Excellent Team Leader
Job Description
Primary Location
Taiwan-Chung-Li
Additional Locations
Worker Type
Employee
Worker Sub-Type
Regular
Time Type
Full time
Type: Permanent Location: Hsin Wu Hsiang, TW-TAO
Salary / Rate: Not Specified
Posted: 2025-03-26 07:17:43
-
Summary
The Maintenance Technician will provide professional, skilled labor in completing all tasks including installation and repair of robots, hydraulic, electrical and pneumatic machinery.
Job Duties
* Follow all safety requirements
* Inspect, troubleshoot and diagnose equipment failures and root causes
* Repair all plant machinery and equipment including robots, welders, hydraulic presses and mechanical presses
* Provide mechanical and electrical support for plant equipment and machinery
* Perform preventative maintenance on equipment and maintain a PM schedule
* Follow and support company IATF 16949 and ISO 14001 policies, procedures and work instructions
* Assemble, install or repair wiring
* Move, align, level, and install machinery
* Install or repair lighting and maintain upkeep of facility
* Observe functioning of installed equipment to detect hazards and adjustment needs
* Work within a team environment
* Work overtime as required
* Perform other duties as assigned
Core Competencies
* Attendance - Good Attendance
* Safety – Follows all safety rules
* Quality – Attention to detail and committed to excellence with zero defects
* Productivity – Working at a fast pace meeting productivity goals and standards
* Teamwork - Works well with others and follows instructions
Requirements
* Minimum of five years of industrial mechanical experience in a manufacturing environment required
* Ability to read prints/schematics and effectively trouble-shoot hydraulic, electrical and mechanical and pneumatic controls/machinery
* Experience with welding and fabrication a plus
* Strong mechanical aptitude with knowledge of hydraulics & pneumatic systems
* Knowledge of plant facility maintenance
* Strong electrical and mechanical skills
* PLC Knowledge
* Strong communication skills and problem solving skills
* Strong problem solving skills, teamwork and interpersonal skills
Working Conditions
* Physical ability to lift up to 50 lbs.
* Must be able to stand up to 10 hours per day with frequent walking, bending, stooping, reaching,
Kneeling, and crawling activities
* Wearing required PPE in a manufacturing environment
....Read more...
Type: Permanent Location: Shelby Township, US-MI
Salary / Rate: Not Specified
Posted: 2025-03-26 07:14:06
-
Job Category:
Manufacturing/Operations
Job Family:
Operations Maintenance Excellence
Job Description:
The regional reliability manager's main goal is to boost the reliability, availability, and performance of manufacturing equipment and facilities, ensuring smooth operations, increasing uptime, and boosting efficiency and profits in more than one plant within a region.
They support maintenance and operations by proactively pinpointing potential failures or weaknesses and creating strategies to prevent or lessen these issues.
The regional reliability engineer assures safety standards and regulatory compliance, including adherence to SQF (Safe Quality Food) requirements.
Responsibilities will include supporting locations outside of home plant.
What you’ll do:
Asset Lifecycle Management:
• Implement companywide strategies for managing the lifecycle of manufacturing assets.
• Drive component standard adherence to drive reliability.
• Improve assets and facilities by finding ways to enhance reliability, efficiency, and cost-effectiveness.
Leadership & Development:
• Facilitates best practice sharing to drive companywide reliability.
• Provide training and support to regional partners on reliability best practices, and reliability metrics to raise awareness and drive companywide culture.
• Use measures to drive performance and evaluate progress.
Data Analysis and Continuous Improvement:
• Analyze data from equipment sensors and maintenance records to spot potential reliability issues to prioritize for improvement.
• Use advanced statistics and engineering mathematics for analysis.
• Drive continuous improvement initiatives to enhance equipment and process reliability.
• Use reliability tools and methodologies (e.g., FMEA, RCA, RCM, PdM technologies, etc.).
Failure, Root Cause Analysis, & Risk Assessment:
• Investigates the root causes of failures to understand why they happened and how they can be prevented in the future.
• Assess potential risks associated with equipment failures.
• Develop strategies to mitigate risks, such as implementing redundancy measures or upgrading critical equipment.
Asset Care Strategy:
• Improves proactive maintenance by driving precision assembly and lubrication excellence.
• Develop, implement, and improve predictive & preventive maintenance strategies to drive reliability.
• Implement tool strategies to ensure that equipment is properly maintained and serviced to prevent unplanned downtime and equipment failures.
Collaboration and Compliance:
• Collaborate with and works closely with cross-functional teams, including maintenance, operations, engineering, Environmental Health Safety (EHS), and quality assurance, to ensure alignment on reliability goals and initiatives.
• Implement and govern use of engineering standards.
• Ensure compliance with industry standards and regulations.
Together with the leadership team, ensures compliance with Food Safety and Food Quality ...
....Read more...
Type: Permanent Location: Green Bay, US-WI
Salary / Rate: Not Specified
Posted: 2025-03-25 07:16:18
-
Alaska West Express, Inc.
is hiring for a Mechanic in Fairbanks, AK.
Why work for us?
Our company offers excellent benefits to include:
* Safety / performance bonus
* Full benefits package to include medical, dental and vision with low costs for full family coverage
* 401k plan with up to 6% employer match
* Paid holidays, paid time off and extended leave
The successful candidate will repair and maintain commercial trucks, machinery, and mechanical equipment such as engines, motors, pneumatic tools, conveyor systems, and production machines and equipment by performing the following duties.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following:
(Other duties may be assigned)
* Attendance and timeliness are essential functions of this position.
* Observes mechanical devices in operation and listens to their sounds to locate causes of trouble.
* Reads job order and determines work procedures.
* Dismantles devices to gain access to and remove defective parts.
Install new parts and reassembles device.
* Examines form and texture of parts to detect imperfections.
Inspects used parts to determine changes in dimensional requirements.
* Examines protective guards, loose bolts, and specified safety devices on trucks, and makes adjustments.
* Repairs or replaces defective parts.
Installs special functional and structural parts in devices.
Lubricates and cleans parts.
* Starts and drives repaired equipment to verify conformance to specifications and to test their performance and may assist with equipment relocation.
* Operate company vehicles and forklifts in a safe, professional manner.
* Sets up and operates drill press, grinder, and other metalworking tools to make and repair parts.
* Repairs electrical equipment.
* Performs basic computer functions by completing job work orders using web-based fleet equipment maintenance system, recording materials used, type of work accomplished, and maintenance system codes.
* Complies with all company safety policies, including use of protective equipment and Fit for Work.
QUALIFICATION REQUIREMENTS:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Education and/or Experience:
High school diploma or general education degree (GED); or one to three years related experience and/or training; or equivalent combination of education and experience.
Language Skills:
Ability to read and speak the English language sufficiently to converse with co-workers, supervisors, and managers, to understand procedures and warning signs and or markings in the English language, to respond to inquiries, and to make entries on reports and records.
Mathematical Skills:...
....Read more...
Type: Permanent Location: Fairbanks, US-AK
Salary / Rate: Not Specified
Posted: 2025-03-23 07:24:40
-
Alaska Marine Trucking provides and manages local freight distribution services in Alaska which includes loading, unloading, warehousing, pickup and delivery.
Alaska Marine Trucking works closely with Alaska Marine Lines in coastal communities throughout Southeast, Central, and Western Alaska.
We currently have an opening for a Mechanic in Juneau, Alaska.
This is a full-time position which offers family friendly benefits, a competitive pay package and professional growth.
Currently, our benefit package includes:
Paid time off – start with 17 days paid time off a year (PTO)+ additional extended leave paid time
Paid Holidays– 8 paid holidays a year in addition to PTO
Health Insurance – medical, dental and vision with low employee contributions
Health Insurance for your family– we also contribute to medical, dental and vision for your family.
401(k)– with company match + additional annual retirement contribution.
Tuition Reimbursement
Employee Assistance Program
Life Insurance and AD&D– we pay at no cost to you.
Long term disability– we pay at no cost to you.
Opportunities for internal promotions/career advancement
Be part of our Team and create big possibilities in your life with a challenging and rewarding career at Alaska Marine Trucking.
SUMMARY:
Provides maintenance on heavy-duty equipment such as lift trucks, tractors, freight moving equipment and product transfer systems. Also provides maintenance and repair for company facilities at the direction of Maintenance Manager, Service Center Manager and/or Shop Lead.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Mechanic I
Perform general preventative maintenance. This includes fluid changes, greasing equipment and minor component changes. Shop cleanliness and safe work practices are essential.
This is an entry level position and on-the-job training will be provided. However, formal education is encouraged. Mechanic will need to learn a basic skill in our M&R software. Must be certified on a 4T forklift.
Mechanic II
All the responsibilities of a Mechanic I. Ability to perform FHWA inspections. The ability to assist with more major component swaps like hydraulic pump, engines and transmissions. Basic welding skills.
Electrical, hydraulic, engine, A/C and emissions system diagnostics and repairs diagnostic skills required. Must have at least a Class A CDL permit. This position requires at least 1-year Mechanical experience. Must be willing to travel when needed. 52T forklift certified.
Mechanic III
All the responsibilities of a Mechanic I-II. Has a Class A CDL with appropriate endorsements. Ability to perform major component changes alone if needed. Can work independently as well as take lead on projects. Can create and receive PO’s in our M&R software system.
Mechanic IV
All the responsibilities of Mechanic I-III. Advanced knowledge and skills in electrical, hydraulic, engine, A/C and emissions systems diagnostic...
....Read more...
Type: Permanent Location: Juneau, US-AK
Salary / Rate: Not Specified
Posted: 2025-03-22 07:36:17
-
Alaska Marine Lines is looking for an experienced diesel mechanic.
Have you been working on diesel engines for the last few years and are ready for a new challenge? We are looking for a heavy equipment diesel mechanic who wants job stability and great benefits in a career that will lead them to retirement.
This is a safety sensitive position.
Essential Duties and Responsibilities:
* Diagnose & repair company equipment using specialized tools and meters as well as hand & power tools.
* Perform preventative maintenance to ensure reliability of equipment.
* Adjust, repair and/or replace parts in engines, transmissions, differentials, brakes and other equipment.
* Observe, listen and operate mechanical devices (both in and out of operations) to locate causes of trouble or signs of failure.
* Install new systems either as designed or as changed by the company.
* Adjust or repair hydraulic systems and components.
* Ability and willingness to travel to Alaska twice a year as required for varied lengths of time.
* Own basic hand tools common to the trade and be willing and able to acquire additional tooling as the position requires. Properly use and maintain company supplied tooling.
* Comply with all company safety polices, including use of protective equipment and Fit for Work.
Qualifications:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and physical demands in the work environment.
* Journey level mechanic with at least 4 years related experience preferred.
* Experience and considerable knowledge of the methods, materials and equipment used in the maintenance and repair of various types of heavy equipment, lift trucks, tractors, hostlers and other driven equipment and tools.
* AA certificate from college or vocational/technical school in Diesel Technology is preferred.
*
*
*Pay rate is dependent on experience
*
*
*
Your Benefits will include:
Paid Time off – start with 17 days paid time off a year (PTO) + additional extended leave paid time
Paid Holidays - 8 paid holiday a year in additional to PTO (New Years Day, Memorial Day, Fourth of July, Labor day, Thanksgiving Day, Day after Thanksgiving, Christmas Eve, Christmas Day)
Health Insurance - medical, dental and vision with low employee contributions
Health Insurance for your family – we also contribute to medical, dental and vision for your family
401(k) with company match + additional annual retirement contribution
Tuition Reimbursement
Employee assistance program
Life Insurance and AD&D – we pay for at no cost to you
Long term disability – we pay for at no cost to you
Opportunities for internal promotions/career advancement
Fam...
....Read more...
Type: Permanent Location: Seattle, US-WA
Salary / Rate: 45.005
Posted: 2025-03-20 07:29:17
-
Job Category:
Manufacturing/Operations
Job Family:
Process Excellence
Work Shift:
Job Description:
Operational Excellence Specialist
Deliver the efforts of Operational Excellence, Continuous Improvement and Lean Manufacturing initiatives at the line level.
Drive Continuous Improvement and process standardization efforts in plant operations through:
1) Engaging with production floor partners and other cross functional groups, to identify and escalate problems.
2) Identifying and completing projects through the application of Lean and DMAIC problem solving methods.
3) Measuring and communicating improvement opportunities to plant leaders and partners.
4) Monitoring and sustaining improvements by updating, creating, or maintaining standard operating procedures (SOPs).
What you'll do:
* Identify and escalate problems by spending majority of time engaged with production floor partners
* Coordinate and facilitate team-based improvement activities such as Kaizen Events, problem solving circles (PSCs) and Gemba
* Deliver small improvement projects by engaging with cross functional work teams and utilizing Lean and DMAIC principles
* Develop forms, Visual Work Instructions, standard operating procedures, 5-S material, and other training material to support continuous improvement activities. All must comply with plant and organizational requirements.
* Develop measurement tools which show compliance/non-compliance with plant standards as established by the program and communicate these to Ops Leadership, Plant Partners and Plant Leadership.
* Monitor and coordinate the control and sustainment of process improvement efforts, related to Ops Excellence activities.
* Provide guidance on Lean Tools, 5-S, Root Cause Analysis, TPS, Takt Time Analysis, Poke Yoke, Kanban, Waste (Muda) Reduction, etc.
* Maintain and monitor plant partner training and documentation related to operations excellence.
* Partner with other Operational Excellence team members to realize plant and company initiatives.
Together with the leadership team, ensures compliance with Food Safety and Food Quality Plans, in addition to customer requirements.
Interprets and communicates customer requirements to plant production and/or support groups.
Establishes and Audits PCPs, CCPs and Standard Operating Procedures to define and monitor processes, to ensure customer requirements are met.
Reviews incidents during which the procedures are not met and determines appropriate corrective action for partners failing to follow standard procedures.
What you need to succeed:
* High School Diploma/GED
* 0-5 years of production experience
* The Operational Excellence Specialist will be required to be certified as a Quality Improvement Associate (CQIA) or Lean Six Sigma Green Belt by the American Society of Quality (ASQ) no later than three (3) years following the assignment into this job.
* Ability to identify waste in a proce...
....Read more...
Type: Permanent Location: Richland Center, US-WI
Salary / Rate: Not Specified
Posted: 2025-03-19 07:30:04
-
---------- Up to $31.56 / HOUR ----------
LTI, Inc. is looking for individuals who possess a positive attitude and who are customer driven to join our team! At LTI, Inc.
we specialize in the transport of liquid- and dry-bulk commodities in the Pacific Northwest and Western Canada. For over 70 years, we have proudly served our customers transportation requirements and the needs of our employees.
This is a safety sensitive position.
Why Work for LTI, Inc.
* Benefits: Employees (and their families) may opt in to medical, dental, vision, and basic life insurance. Long Term Disability Coverage, AD&D Insurance, and Employee Assistance Programs + flexible spending arrangements.
* Paid Time Off/Extended Leave: Start with 96 hours of paid time off a year + additional paid extended leave, days increase with years of service.
* Holidays: 6 paid Holidays a year
* Compensation: $27.52 – $31.56 / Hour
* Retirement Plan: 50% of the first 6% contributed matched + an additional 3% of your compensation regardless of your participation following one year of service.
* Company Provides: Training, uniforms, and safety equipment
Qualifications
High school diploma or general education degree (GED); Technical School degree in related field is recommended, or 2-5 years related experience and/or training; or equivalent combination of education and experience. Must have a valid driver’s license and be at least 18 years of age. Must have own toolbox and basic tools.
What You’ll Do
* Perform maintenance and repair on LTI Inc / Milky Way Commercial Motor Vehicle fleet (Class 8)
* Consistent Year-round work
* Opportunity to work on a variety of equipment
* Comply with all Safety and DOT regulations
* Company purchases new equipment annually (Kenworth & Freightliner)
* Work with a professional team dedicated to helping you and our customers succeed
Attributes We Are Looking For
* Team player
* Hard worker
* Flexible
* Positive attitude
* Willing to learn
* Has a passion for mechanical work (wrenches to computers)
As a maintenance technician at LTI, Inc.
you will be at the intersection of quality, safety, and customer service. Every choice you make, from safety checks and maintenance, to operating the vehicle creates an amazing experience for our loyal customers. Are you ready to team up with a company that puts its customers and employees first and strives to be the best?
Contact Us
We are looking forward to hearing from you and discussing your career with LTI, Inc.
and the Lynden family of companies. Send us an email at LTIIHR@lynden.com or give us a call at 800-327-6255.
Our Story
LTI, Inc.
is part of the Lynden family of companies® that provides transportation and logistics solutions in Alaska, Canada, the Pacific Northwest, Hawaii, and around the world.
Extensive multi-mo...
....Read more...
Type: Permanent Location: Sunnyside, US-WA
Salary / Rate: Not Specified
Posted: 2025-03-19 07:24:03
-
Job Category:
Manufacturing/Operations
Job Family:
Process Excellence
Job Description:
Deliver the efforts of Operational Excellence, Continuous Improvement and Lean Manufacturing initiatives at the plant level.
Drive process standardization and focus on plant opportunities that reduce variation/eliminate waste leading to plant savings.
Duties include monthly projects with quantified impacts through planning, organizing, training, coaching, troubleshooting, evaluation, monitoring, technical support.
*This position is located onsite in Grand Rapids, MI.
Relocation Benefits: Receive a $10,000 relocation bonus PLUS a generous relocation package if relocating more than 50 miles for the position
What you’ll do:
* Develop Schreiber Foods Culture – Train, coach, evaluate and reinforce Continuous Improvement principles with partners and Team Members
* Lead efforts in improving cost and quality initiatives by utilizing Six Sigma type efforts.
Execute DMAIC problem-solving projects that have an impact on plant KPIs.
* Work with Plant Leadership in identifying and communicating customer requirements and updating process controls to reflect best practices.
* Maintain cross functional working relationships with Quality, Safety, Operations, Maintenance, Engineering, etc.
Collaborates with the plant team to identify Operational Excellence activities based on plant needs, opportunities, and challenges.
* Be knowledgeable of various government regulations that must be complied with, i.e., OSHA, USDA, FDA, EPA, EEOC, OFCCP, etc.
* Execute and own program initiatives for the plant including Problem Identification/Problem Solving Activities – Root Cause Analysis, Critical Processes, Lean, DMAIC, Digital Standard Work (Dozuki) and Process Optimization, Centerline, 5S
* Help drive and analyze plant level metrics that support plant Critical Processes and KPIs.
Monitors applicable results and performs data analysis to establish baselines and exceptions limits.
Together with the leadership team, ensures compliance with Food Safety and Food Quality Plans, in addition to customer requirements.
Interprets and communicates customer requirements to plant production and/or support groups.
Establishes and Audits PCPs, CCPs and Standard Operating Procedures to define and monitor processes, to ensure customer requirements are met.
Reviews incidents during which the procedures are not met and determines appropriate corrective action for partners failing to follow standard procedures.
What you will need to succeed:
* Bachelor’s degree in engineering or related field.
Relevant technical experience of 6+ years may be considered in lieu of a bachelor’s degree.
* 0-6 years experience in engineering, technical or related area
* ASQ Green Belt Certification Required
* ASQ Black Belt Certification Preferred
* Technical Competency - DMAIC, Lean, Kaizen, and Change Management
* High Volume ...
....Read more...
Type: Permanent Location: Wyoming, US-MI
Salary / Rate: Not Specified
Posted: 2025-03-18 07:24:48
-
Service Technician and Mechanic
ALL Crane Rental of Louisiana, LLC
Geismar, LA (70734)
Position Summary
ALL Crane Rental of Louisiana, LLC.
is seeking a Service Technician & Mechanic.
Hands-on experience with cranes and lift equipment is a big plus.
This is a full-time, non-exempt position with comprehensive benefits package.
The position is eligible for a candidate sign-on bonus of $300 after 100 days of continuous employment.
Essential Functions
* Responsible for troubleshooting, maintenance, and repair on mobile cranes, heavy duty semi-tractors and trailers
* Diagnose, repair, adjust, and modify components as needed
* Reads, understands and interprets operating manuals, parts manuals, blueprints and technical drawings
* Positive interface with service writers, supervisor, parts department and customers
* Prepare proper documentation of actions taken
* Able to work with diagnostic equipment (i.e.
Cummins INSITE) for troubleshooting and repairs
* Maintain conformity to safety requirements and other regulations
* Other duties as assigned
Skills and Experience Requirements
* Must have a strong diesel engine, hydraulic and electrical background
* Strong initiative required; ability to work independently with minimal direct supervision
* Must have basic set of mechanic’s hand tools
* Ability to work safely around moving machinery; to work in conditions with marked changes in temperature & humidity
* Ability to safely operate complex construction equipment
* Able to lift 50 lbs
* Previous experience with Kenworth and Peterbilt trucks is a plus
Manufacturer’s training will be an integral part of this position.
Applicant must be willing to learn new computer, electronic and hydraulic systems, follow safety guidelines as they evolve in our industry, and remain certified within the various portions of our field such as assembly, disassembly, and troubleshooting.
Benefits
* Competitive wages.
* Paid Time Off and Holidays.
* Comprehensive Benefits Plans (Medical, Dental, Life and Disability Insurance).
* 401(k) retirement plan with company match.
ALL Crane Family of Companies
The ALL Family of Companies and its affiliated branches are Equal Opportunity Employers with competitive wage and benefits packages in a drug-free environment.
The ALL Family of Companies is the largest privately-owned crane rental and sales enterprise in North America, with 29 strategically located branches operating under the ALL, Central, Dawes, and Jeffers names – including specialized divisions for aerial lifts, boom trucks (ALT Sales), and parts.
Since 1964, the ALL Family has been a leader in the lift industry – with market strengths that include commercial construction, roads & bridges, power generation, plants & processing, facility maintenance, and more.
We're ALL you need ®
The ALL Family of Companies is an Equal Opportunity Employer – M/F/Veteran/Disabi...
....Read more...
Type: Permanent Location: Geismar, US-LA
Salary / Rate: Not Specified
Posted: 2025-03-18 07:16:20
