-
PRIMARY FUNCTION:
The primary function of this position is to perform moderate mechanical repairs and assembly on construction equipment by trouble-shooting and using various diagnostic equipment.
ESSENTIAL DUTIES:
* Check the equipment and supplies required to perform the work scheduled, comply with PPE requirements, and otherwise prepare for duties.
* Uses manuals, repair manuals, parts manuals, parts diagrams to perform independent troubleshooting and repair of construction equipment.
* Uses lift trucks, overhead cranes, & other aides to lift or move parts into position to be repaired.
* Uses hand & power tools to remove, install, replace, re-build, repair, & test parts/equipment on construction equipment.
* Uses miscellaneous resources and computers to reference parts, get information about parts & enter data into record systems.
* Uses tools to disassemble/re assemble parts or equipment; cleans parts with rags, cleaners, power washer; uses test equipment to make diagnostic checks; and controls powered equipment or tools to make repairs.
* Climbs up onto, under, & into vehicles to gain access to all parts of vehicle.
* Uses overhead hoists, lift devices, forklifts & other aides to move items off vehicle (tracks, idler wheels, blades, etc.) & then to move parts to locations for disassembly, repair, then back to the vehicle for reassembly.
* Performs inspections, do preventative maintenance, repair engines, power train, hydraulic and electrical components.
* Uses power washers & spray paint equipment to clean & paint vehicle.
* Uses instruments and computers to reprogram equipment controllers.
MINIMUM REQUIREMENTS:
Education:
Must have a high school education or GED
Work Experience:
Requires three years direct work experience with a working knowledge of CAT literature systems and be proficient in at least one mechanical system (i.e.
hydraulics, transmissions, electrical, etc.).
Physical:
Must be able to daily and repeatedly stoop, kneel, bend and climb beside, onto and underneath various equipment to perform diagnosis and repairs; Must be able to effectively see to perform repairs, research technical manuals, and develop written repair work order reports. Must be able to routinely and physically lift/position various parts to perform repairs/service and manually handle parts up to 112 pounds, as well as use mechanical hoist for heavier parts.
Other:
Must be able to effectively write repair activities on customer work orders; Must have cognitive reasoning and problem solving skills to apply knowledge, written information and verbal instructions in repairing/servicing unusual and/or unknown technical equipment operational problems.
Should have exposure to P.C.
base equipment and parts information;
This job description is not intended to be all-inclusive. Your supervisor may request and assign you similar duties. Any major modification of this job role requires Human Res...
....Read more...
Type: Permanent Location: Leland, US-NC
Salary / Rate: Not Specified
Posted: 2025-03-27 07:24:03
-
PRIMARY FUNCTION:
The primary function of this position is to troubleshoot, remove, install, replace, re-build, repair, & test parts/equipment on construction equipment as an expert as well as lead and coach other technicians.
ESSENTIAL DUTIES:
* Check the equipment and supplies required to perform the work scheduled, comply with PPE requirements, and otherwise prepare for duties.
* Uses manuals, repair manuals, parts manuals, and parts diagrams to perform independent troubleshooting and repair of construction equipment.
* Uses lift trucks, overhead cranes, & other aides to lift or move parts into position to be repaired.
* Uses hand & power tools to remove, install, replace, re-build, repair, & test parts/equipment on construction equipment.
* Be proficient at using resources and computers to reference parts, get information about parts & enter data into record systems.
* Uses tools to disassemble/re-assemble parts or equipment; cleans parts with rags, cleaners, and power washers; uses test equipment to make diagnostic checks; and controls powered equipment or tools to make repairs.
* Climbs up onto, under, & into vehicles to gain access to all parts of the vehicle.
* Uses overhead hoists, lift devices, forklifts & other aides to move items off the vehicle (tracks, idler wheels, blades, etc.) & then to move parts to locations for disassembly, repair, then back to the vehicle for reassembly.
* Proficient at performing inspections, preventative maintenance, and repairing engine, power train, hydraulic, and electrical components at an advanced level on numerous model lines.
* Lift/carry and position ram used to remove idlers, unbolt idlers and remove them with
* Uses power washers & spray paint equipment to clean & paint vehicles.
* Uses instruments and computers to reprogram equipment controllers.
LEADERSHIP DUTIES:
Assists supervisor with performance appraisals.
Coach, guide, and develop technicians.
Direct day-to-day job assignments and responsibilities for up to five or more technicians in the squad.
Work with squad members to ensure proper T/S techniques are used to ensure that the product we turn out is a true representation of the customers’ and GPEC expectations.
MINIMUM REQUIREMENTS:
Education:
Must have a high school education or GED.
Work Experience:
Eight years of Cat equipment experience.
Fully understands all equipment systems (i.e.
engines, hydraulics, electrical, sub-electrical, transmissions, etc.) for almost all equipment model lines.
Physical:
Must be able to daily and repeatedly stoop, kneel, bend, and climb beside, onto, and underneath various equipment to perform diagnosis and repairs; Must be able to effectively see to perform repairs, research technical manuals, and develop written repair work order reports.
Must be able to routinely and physically lift/position various parts to perform repairs/service and manually handle parts up to 100 pounds, as we...
....Read more...
Type: Permanent Location: Raleigh, US-NC
Salary / Rate: 32.4
Posted: 2025-03-27 07:23:58
-
PRIMARY FUNCTION
The primary function of this position is to troubleshoot, remove, install, replace, rebuild, repair, and test parts/equipment on construction equipment at an advanced level while working in the field.
ESSENTIAL DUTIES:
Check the equipment and supplies required to perform the work scheduled, comply with PPE requirements, and otherwise prepare for duties.
Uses manuals, repair manuals, parts manuals, and parts diagrams to troubleshoot construction equipment.
Uses lift trucks, overhead cranes, and other aids to lift or move parts into position to be repaired.
Uses hand and power tools to remove, install, replace, rebuild, repair, and test parts/equipment on construction equipment.
Uses multiple resources and computers to reference parts, get information about parts, and enter data into record systems.
Uses tools to disassemble/reassemble parts or equipment; cleans parts with rags, cleaners, power washer; uses test equipment to make diagnostic checks; and uses powered equipment or tools to make repairs.
Climbs up onto, under, and into vehicles to gain access to all parts of vehicle.
Uses overhead hoists, lift devices, forklifts, and other aids to move items off vehicle (tracks, idler wheels, blades, etc.), and then to move parts to locations for disassembly, repair, then back to the vehicle for reassembly.
Performs inspections, do preventative maintenance, change oil, replace filters, belts, coolants, hoses, may drain/clean/refill fuel systems.
Uses welders to weld frames and use power grinders to grind welds smooth.
Lift/carry and position hydraulic rams used to install press fit items.
Uses power washers and spray paint equipment to clean and paint vehicle.
Uses instruments and computers to reprogram equipment controllers.
MINIMUM REQUIREMENTS:
Education:
Must have a high school education or GED.
Work Experience:
Six years of experience with at least two years of experience on Cat equipment or other similar equipment.
Must be proficient in at least two mechanical systems (i.e.
transmissions, engines, hydraulics, etc.) for numerous model lines.
Physical:
Must be able to daily and repeatedly stoop, kneel, bend and climb beside, onto, and underneath various equipment to perform diagnosis and repairs.
Must be able to effectively see to perform repairs, research technical manuals, and develop written repair work order reports.
Must be able to routinely and physically lift/position various parts to perform repairs/service and manually handle parts up to 112 pounds, as well as use mechanical hoist for heavier parts.
Other:
Must be able to effectively document repair activities on customer work orders.
Must have cognitive reasoning and problem solving skills to apply knowledge, written information, and verbal instructions in repairing/servicing unusual and/or unknown technical equipment operational problems.
Should have basic proficiency using P.C.
base equipment and parts information.
Can work independently with min...
....Read more...
Type: Permanent Location: Washington, US-NC
Salary / Rate: 27.975
Posted: 2025-03-27 07:23:53
-
PRIMARY FUNCTION:
The primary function of this position is to perform advanced level preventative maintenance services to ensure customer equipment is operating at maximum efficiency and productivity.
In the Fayetteville Area
ESSENTIAL DUTIES:
Change engine oil and filters, transmission oil and filters, hydraulic oil and filters, final drives and differential oils
Lubricate all grease fittings
Inspect and clean air induction system, replace air filters
Inspect and make minor machine repairs
Check for fluid leaks
Inspect all hoses and belts
Clean and/or change fuel filters
Take fluid samples (engine, coolant, hydraulic, transmission, and final drives)
Perform track adjustments/visual tracks inspections
Inspect tires and valves, inflate to proper pressure
Inspect hydraulic cylinders
Inspect Ground Engaging Tools (Bucket teeth, cutting edges)
Inspect braking systems
Inspect safety equipment
Maintain parts consignment
MINIMUM REQUIREMENTS:
Education:
Must have a high school education or GED.
Work Experience:
Six years of experience with at least two years of experience on Cat equipment or other similar equipment; Must be proficient in at least two mechanical systems (i.e.
transmissions, engines, hydraulics, etc.) for numerous model lines.
Physical:
Must be able to daily and repeatedly stoop, kneel, bend and climb onto and underneath various equipment to perform diagnosis and repairs.
Must be able to effectively see to perform repairs, research technical manuals, and develop written repair work order reports.
Must be able to routinely and physically lift/position various parts to perform repairs/service and manually handle parts up to 110 pounds, and manually handle parts up to 100 pounds, as well as use mechanical hoist for heavier parts.
Must be able to work in adverse weather.
Other:
Must be able to effectively document repair activities on customer work orders.
Must have cognitive reasoning and problem solving skills to apply knowledge, written information and verbal instructions in repairing/servicing unusual and/or unknown technical equipment operational problems.
Should have basic proficiency using P.C.
base equipment and parts information; must work independently with minimal supervision.
Field Activity- Must be able to daily operate an assigned service vehicle as well as be prequalified to operate under GPEC Fleet Policy Standards.
The driver must be able to operate their assigned vehicle for extended periods in order to reach customer’s locations.
Must be able to effectively communicate using telephones to receive instructions and to provide service information.
Must be able to effectively deal directly with customers at site locations in a professional manner.
Additional: Field activities require a valid state driver’s license (obtain within 30 days of hire a valid license within the state of GPEC’s operation) AND possess a safe driving record which meets the safe driving standards outlined in the GPEC Fleet Polic...
....Read more...
Type: Permanent Location: Leland, US-NC
Salary / Rate: Not Specified
Posted: 2025-03-27 07:23:47
-
The primary function of this position is to troubleshoot, remove, install, replace, rebuild, repair, and test parts/equipment on construction equipment at an advanced level while working in the field.
ESSENTIAL DUTIES:
Check the equipment and supplies required to perform the work scheduled, comply with PPE requirements, and otherwise prepare for duties.
Uses manuals, repair manuals, parts manuals, and parts diagrams to troubleshoot construction equipment.
Uses lift trucks, overhead cranes, and other aids to lift or move parts into position to be repaired.
Uses hand and power tools to remove, install, replace, rebuild, repair, and test parts/equipment on construction equipment.
Uses multiple resources and computers to reference parts, get information about parts, and enter data into record systems.
Uses tools to disassemble/reassemble parts or equipment; cleans parts with rags, cleaners, power washer; uses test equipment to make diagnostic checks; and uses powered equipment or tools to make repairs.
Climbs up onto, under, and into vehicles to gain access to all parts of vehicle.
Uses overhead hoists, lift devices, forklifts, and other aids to move items off vehicle (tracks, idler wheels, blades, etc.), and then to move parts to locations for disassembly, repair, then back to the vehicle for reassembly.
Performs inspections, do preventative maintenance, change oil, replace filters, belts, coolants, hoses, may drain/clean/refill fuel systems.
Uses welders to weld frames and use power grinders to grind welds smooth.
Lift/carry and position hydraulic rams used to install press fit items.
Uses power washers and spray paint equipment to clean and paint vehicle.
Uses instruments and computers to reprogram equipment controllers.
MINIMUM REQUIREMENTS:
Education:
Must have a high school education or GED.
Work Experience:
Six years of experience with at least two years of experience on Cat equipment or other similar equipment.
Must be proficient in at least two mechanical systems (i.e.
transmissions, engines, hydraulics, etc.) for numerous model lines.
Physical:
Must be able to daily and repeatedly stoop, kneel, bend and climb beside, onto, and underneath various equipment to perform diagnosis and repairs.
Must be able to effectively see to perform repairs, research technical manuals, and develop written repair work order reports.
Must be able to routinely and physically lift/position various parts to perform repairs/service and manually handle parts up to 112 pounds, as well as use mechanical hoist for heavier parts.
Other:
Must be able to effectively document repair activities on customer work orders.
Must have cognitive reasoning and problem solving skills to apply knowledge, written information, and verbal instructions in repairing/servicing unusual and/or unknown technical equipment operational problems.
Should have basic proficiency using P.C.
base equipment and parts information.
Can work independently with minimal supervision....
....Read more...
Type: Permanent Location: Harrisonburg, US-VA
Salary / Rate: Not Specified
Posted: 2025-03-27 07:23:44
-
PRIMARY FUNCTION:
The primary function of this position is to independently perform advanced repairs on material handling equipment to the customer’s satisfaction while in the field.
Perform necessary service, preventative maintenance, repairs, replacements, installations, or re-building of components to restore material handling equipment to proper operation.
ESSENTIAL DUTIES:
* Review the work schedule, check the equipment and supplies required to perform the work scheduled, comply with PPE requirements, and otherwise prepare for duties.
* Use repair manuals, parts manuals, and parts diagrams to troubleshoot engines, engine fuel systems, transmissions, or other components on material handling equipment.
* Load service truck with parts & equipment needed for field repairs to material handling equipment.
* Use lift trucks, hoist on truck, & other aides to lift or move parts into position to be repaired.
* Use hand & power tools to remove, install, replace, re-build, repair, & test parts/equipment on engines, engine fuel systems, transmissions, & other components.
* Perform all necessary safety checks on the equipment per procedures & policy.
* Use miscellaneous resources & computers to reference parts, get information about parts & enter data into record systems.
* Use hand & power tools to disassemble/re assemble parts or equipment, drains fluids into tubs, cleans parts with rags, cleaners.
* Climb up onto, under, & into vehicles, uses hand & power tools to disassemble/re assemble: sheet metal, engines, transmissions, fuel systems, & other parts or equipment.
* Replace pumps, batteries, radiators, bearings, seals, wiring, solenoids, fuel lines, nozzles, tests float valves, glow plugs, alternators.
* Use hoists on service truck to move parts that need to be moved off of vehicle & onto service truck & to move items back to vehicle to be reassembled.
* Use meters, measuring devices, & computers to test & recalibrate equipment, trains operators when necessary, completes warranty paperwork.
* Perform inspections, do preventative maintenance, change oil, replace filters, belts, coolants, hoses, may drain/clean/refill fuel systems.
MINIMUM REQUIREMENTS:
Education:
Must have a high school education or GED.
Work Experience:
Six years of experience with at least two years of experience on Hyster, Yale, Clark or other similar equipment; Must be proficient in at least two mechanical systems (i.e.
transmissions, engines, hydraulics, etc.) for numerous model lines.
Physical:
Must be able to daily and repeatedly stoop, kneel, bend and climb onto and underneath various equipment to perform diagnosis and repairs.
Must be able to effectively see to perform repairs, research technical manuals, and develop written repair work order reports. Must be able to routinely and physically lift/position various parts to perform repairs/service and manually handle parts up to 95 pounds, as w...
....Read more...
Type: Permanent Location: Raleigh, US-NC
Salary / Rate: 27.975
Posted: 2025-03-27 07:23:40
-
PRIMARY FUNCTION:
The primary function of this position is to independently perform advanced repairs on material handling equipment to the customer’s satisfaction while in the field.
Perform necessary service, preventative maintenance, repairs, replacements, installations, or re-building of components to restore material handling equipment to proper operation.
ESSENTIAL DUTIES:
* Review the work schedule, check the equipment and supplies required to perform the work scheduled, comply with PPE requirements, and otherwise prepare for duties.
* Use repair manuals, parts manuals, and parts diagrams to troubleshoot engines, engine fuel systems, transmissions, or other components on material handling equipment.
* Load service truck with parts & equipment needed for field repairs to material handling equipment.
* Use lift trucks, hoist on truck, & other aides to lift or move parts into position to be repaired.
* Use hand & power tools to remove, install, replace, re-build, repair, & test parts/equipment on engines, engine fuel systems, transmissions, & other components.
* Perform all necessary safety checks on the equipment per procedures & policy.
* Use miscellaneous resources & computers to reference parts, get information about parts & enter data into record systems.
* Use hand & power tools to disassemble/re assemble parts or equipment, drains fluids into tubs, cleans parts with rags, cleaners.
* Climb up onto, under, & into vehicles, uses hand & power tools to disassemble/re assemble: sheet metal, engines, transmissions, fuel systems, & other parts or equipment.
* Replace pumps, batteries, radiators, bearings, seals, wiring, solenoids, fuel lines, nozzles, tests float valves, glow plugs, alternators.
* Use hoists on service truck to move parts that need to be moved off of vehicle & onto service truck & to move items back to vehicle to be reassembled.
* Use meters, measuring devices, & computers to test & recalibrate equipment, trains operators when necessary, completes warranty paperwork.
* Perform inspections, do preventative maintenance, change oil, replace filters, belts, coolants, hoses, may drain/clean/refill fuel systems.
MINIMUM REQUIREMENTS:
Education:
Must have a high school education or GED.
Work Experience:
Six years of experience with at least two years of experience on Hyster, Yale, Clark or other similar equipment; Must be proficient in at least two mechanical systems (i.e.
transmissions, engines, hydraulics, etc.) for numerous model lines.
Physical:
Must be able to daily and repeatedly stoop, kneel, bend and climb beside, onto and underneath various equipment to perform diagnosis and repairs.
Must be able to effectively see to perform repairs, research technical manuals, and develop written repair work order reports.
Must be able to routinely and physically lift/position various parts to perform repairs/service and manually handle parts up to 95 pounds, ...
....Read more...
Type: Permanent Location: Mebane, US-NC
Salary / Rate: Not Specified
Posted: 2025-03-27 07:22:37
-
PRIMARY FUNCTION
The primary function of this position is to independently troubleshoot, remove, install, replace, rebuild, repair, and test parts/equipment on construction equipment at an advanced level while working in the field.
ESSENTIAL DUTIES:
* Check the equipment and supplies required to perform the work scheduled, comply with PPE requirements, and otherwise prepare for duties.
* Uses manuals, repair manuals, parts manuals, and parts diagrams to troubleshoot construction equipment.
* Uses lift trucks, overhead cranes, and other aids to lift or move parts into position to be repaired.
* Uses hand and power tools to remove, install, replace, rebuild, repair, and test parts/equipment on construction equipment.
* Uses multiple resources and computers to reference parts, get information about parts, and enter data into record systems.
* Uses tools to disassemble/reassemble parts or equipment; cleans parts with rags, cleaners, power washer; uses test equipment to make diagnostic checks; and uses powered equipment or tools to make repairs.
* Climbs up onto, under, and into vehicles to gain access to all parts of vehicle.
* Uses overhead hoists, lift devices, forklifts, and other aids to move items off vehicle (tracks, idler wheels, blades, etc.), and then to move parts to locations for disassembly, repair, then back to the vehicle for reassembly.
* Performs inspections, do preventative maintenance, change oil, replace filters, belts, coolants, hoses, may drain/clean/refill fuel systems.
* Uses welders to weld frames and uses power grinders to grind welds smooth.
* Lift/carry and position hydraulic rams used to install press fit items.
* Uses power washers and spray paint equipment to clean and paint vehicle.
* Uses instruments and computers to reprogram equipment controllers.
MINIMUM REQUIREMENTS:
Education:
Must have a high school education or GED.
Work Experience:
Six years of experience with at least four years of experience on Cat equipment or other similar equipment.
Must be proficient in at least four mechanical systems (i.e.
transmissions, engines, hydraulics, etc.) for numerous model lines.
Physical:
Must be able to daily and repeatedly stoop, kneel, bend and climb, onto and underneath various equipment to perform diagnosis and repairs.
Must be able to effectively see to perform repairs, research technical manuals, and develop written repair work order reports.
Must be able to routinely and physically lift/position various parts to perform repairs/service and manually handle parts up to 112 pounds, as well as use mechanical hoist for heavier parts.
Other:
Must be able to effectively document repair activities on customer work orders.
Must have cognitive reasoning and problem-solving skills to apply knowledge, written information and verbal instructions in repairing/servicing unusual and/or unknown technical equipment operational problems.
Should have basic profici...
....Read more...
Type: Permanent Location: Raleigh, US-NC
Salary / Rate: 30.525
Posted: 2025-03-27 07:22:30
-
PRIMARY FUNCTION:
The primary responsibility of this position is to independently perform a variety of troubleshooting, diagnostic and advance EPG repairs at customer sites to include Air Compressor (Diesel/Electric) and Temperature Control diagnostic/Repairs
ESSENTIAL DUTIES:
* Must be well versed in troubleshooting and repair diesel/natural gas & LP engines and Engine ECMs.
* Must be able to troubleshoot DC control panels, auxiliary display units, governors, and actuators.
* Read and comprehend a/c and d/c schematics as they relate to engine / site specific installations.
* Perform preventive maintenance and services on a wide variety of gensets and commercial engines, to include non-Cat product, air compressors and temperature control systems
* Candidate must be aware and conscious of all safety factors revolving around circuits at high power levels. Must adhere to all company safety policies and the EPG safety work policy. Failure to do so can affect employment status.
* Manage personal work schedule (to include billing out time with limited expense hours, completing and submitting associated paperwork, i.e.: timecard, service reports, warranty related information, completion of core and/or warranty tags for failed parts, look up and submission of needed parts orders.
* The candidate must properly maintain all assigned company property and submits all expense records on a monthly basis.
* Candidate must be able to attend training courses related to job position as needed, monthly Pure Safety and notify supervisor of training needs on an ongoing basis.
MINIMUM REQUIREMENTS:
Education:
Must have a high school education or GED.
Work Experience:
Six years of experience with at least two years of experience on Cat engines and / or like competitive equipment.
Physical:
Must be able to daily and repeatedly stoop, kneel, bend and climb besides, onto and underneath various equipment to perform diagnosis and repairs.
Must be able to effectively see to perform repairs, research technical manuals, and develop written repair work order reports. Must be able to routinely and physically lift/position various parts to perform repairs/service and manually handle parts up to 137 pounds, as well as use mechanical hoist for heavier parts.
Other:
Will work remotely with rare trips to dispatching office.
Must be able to effectively write repair activities on customer work orders.
Must have cognitive reasoning and problem-solving skills to apply knowledge, written information and verbal instructions in repairing/servicing unusual and/or unknown technical equipment operational problems.
You should have exposure to P.C.
base equipment and parts information; can work independently with minimal supervision. Ability to interface with customers (both internal & external) effectively and courteously
Field Activity- Must be able to daily operate an assigned service vehicle as well as be prequalifie...
....Read more...
Type: Permanent Location: Garner, US-NC
Salary / Rate: Not Specified
Posted: 2025-03-27 07:22:22
-
PRIMARY FUNCTION:
The primary function of this position is to perform preventative maintenance and repairs on Power Systems Equipment.
(Generators, air compressors, both electric and diesel)
ESSENTIAL DUTIES:
* Check the equipment and supplies required to perform the work scheduled, comply with PPE requirements, and otherwise prepare for duties.
* Uses manuals, repair manuals, parts manuals, parts diagrams to perform independent troubleshooting and repair of power systems equipment
* Uses lift trucks, overhead cranes, & other aides to lift or move parts into position to be repaired.
* Uses hand & power tools to remove, install, replace, re-build, repair, & test parts/equipment on power systems equipment.
* Uses miscellaneous resources and computers to reference parts, get information about parts & enter data into record systems.
* Uses tools to disassemble/re assemble parts or equipment; cleans parts with rags, cleaners, power washer; uses test equipment to make diagnostic checks; and controls powered equipment or tools to make repairs.
* Climbs up onto, under, & into equipment to gain access to all parts of equipment.
* Performs inspections, do preventative maintenance, repair engines and electrical components on power systems equipment.
* Usespower washers to clean power systems equipment.
* Uses instruments and computers to reprogram equipment controllers.
MINIMUM REQUIREMENTS:
Education:
Must have a high school education or GED.
Work Experience:
Requires two of work experience with at least two years’ experience with CAT equipment; Must be proficient in at least two mechanical systems (i.e., engines, gensets, compressors etc.) for numerous model lines.
Physical:
Must be able to daily and repeatedly stoop, kneel, bend and climb beside, onto and underneath various equipment to perform diagnosis and repairs; Must be able to effectively see to perform repairs, research technical manuals, and develop written repair work order reports. Must be able to routinely and physically lift/position various parts to perform repairs/service and manually handle parts up to 112 pounds, as well as use mechanical hoist for heavier parts.
Other:
Must be able to effectively write repair activities on customer work orders; Must have cognitive reasoning and problem-solving skills to apply knowledge, written information and verbal instructions in repairing/servicing unusual and/or unknown technical equipment operational problems.
Should have exposure to P.C.
base equipment and parts information.
This job description is not intended to be all-inclusive. Your supervisor may request and assign you similar duties. Any major modification of this job role requires Human Resources approval.
....Read more...
Type: Permanent Location: Garner, US-NC
Salary / Rate: 28.525
Posted: 2025-03-27 07:22:20
-
PRIMARY FUNCTION:
The primary function of this position is to troubleshoot, remove, install, replace, re-build, repair, & test parts/equipment on construction equipment at an advanced level with proficiency.
ESSENTIAL DUTIES:
* Check the equipment and supplies required to perform the work scheduled, comply with PPE requirements, and otherwise prepare for duties.
* Uses manuals, repair manuals, parts manuals, parts diagrams to perform independent troubleshooting and repair of construction equipment.
* Uses lift trucks, overhead cranes, & other aides to lift or move parts into position to be repaired.
* Uses hand & power tools to remove, install, replace, re-build, repair, & test parts/equipment on construction equipment.
* Be proficient at using resources and computers to reference parts, get information about parts & enter data into record systems.
* Uses tools to disassemble/re assemble parts or equipment; cleans parts with rags, cleaners, power washer; uses test equipment to make diagnostic checks; and controls powered equipment or tools to make repairs.
* Climbs up onto, under, & into vehicles to gain access to all parts of vehicle.
* Uses overhead hoists, lift devices, forklifts & other aides to move items off vehicle (tracks, idler wheels, blades, etc.) & then to move parts to locations for disassembly, repair, then back to the vehicle for reassembly.
* Proficient at performing inspections, do preventative maintenance, repair engines, power train, hydraulic and electrical components at an advance level on numerous model lines.
* Lift/carry and position ram used to remove idlers, unbolt idlers, remove them with
* Uses power washers & spray paint equipment to clean & paint vehicle.
* Uses instruments and computers to reprogram equipment controllers.
MINIMUM REQUIREMENTS:
Education:
Must have a high school education or GED.
Work Experience:
Requires six years of experience with at least two years of experience on Cat equipment or other similar equipment; Must be proficient in at least four mechanical systems (i.e.
transmissions, engines, hydraulics, etc.) for numerous model lines.
Physical:
Must be able to daily and repeatedly stoop, kneel, bend and climb beside, onto and underneath various equipment to perform diagnosis and repairs; Must be able to effectively see to perform repairs, research technical manuals, and develop written repair work order reports.
Must be able to routinely and physically lift/position various parts to perform repairs/service and manually handle parts up to 112 pounds, as well as use mechanical hoist for heavier parts.
Other:
Must be able to effectively write repair activities on customer work orders; Must have cognitive reasoning and problem solving skills to apply knowledge, written information and verbal instructions in repairing/servicing unusual and/or unknown technical equipment operational problems.
Should have exposure to P.C.
base...
....Read more...
Type: Permanent Location: Mebane, US-NC
Salary / Rate: Not Specified
Posted: 2025-03-27 07:22:18
-
PRIMARY FUNCTION:
The primary function of this position is to determine the status of service needed for Caterpillar Industrial engines and components and perform advanced repairs, replacements, installations, or re-building of parts to restore the engine to the proper operation.
This is not limited to Caterpillar engines only.
This would include other OEMs such as Cummins, John Deere, etc.
ESSENTIAL DUTIES:
* Review the work schedule, check the equipment and supplies required to perform the work scheduled, comply with PPE requirements, and otherwise prepare for duties.
* Use digital, electronic and printed manuals, repair manuals, parts manuals, parts diagrams to troubleshoot engines, engine fuel systems, etc.
* Use lift trucks, overhead cranes, & other aides to lift or move parts into position to be repaired.
* Use hand & power tools to remove, install, replace, re-build, repair and test engines, pumps, grinders and other equipement as required.
* Use miscellaneous resources, internet information and computers to reference parts, get information about parts and enter data into order systems and record keeping systems.
* Use hand and power tools to disassemble/re assemble parts or equipment, drain and fill fluids, cleans parts while complying with safety and enviromental standards.
* Climb on, under, and into vehicles, equipment and engines.
* Use hand and power tools to disassemble/re-assemble: sheet metal, engines, transmissions, generators, fuel systems and other parts or equipment as necessary to complete repairs.
* Replace pumps, control panels, batteries, radiators (200 lb.
with assistance), bearings, seals, wiring, solenoids, fuel lines, nozzles, tests float valves, glow plugs, alternators and other parts and equpment as necessary to complete repairs.
* Use shop overhead hoists and truck mounted cranes to remove and install parts, assemblies and complete engines from all types of industrail equipment, generators and trucks.
* Use meters, measuring devices both digital and mechanical, computers and specialized tooling to test, evaluate, repair,and recalibrate parts and/ or equipment.
* Perform inspections, do preventative maintenance, drain /change fluids, replace filters, belts, coolant hoses.
Conduct SOS sampling, perform testing and record results, document and create proper service information.
* Communicate verbally and in writing service documentation such as test results, troubleshooting information and service report requirements.
MINIMUM REQUIREMENTS:
Education:
Must have a high school education or GED.
Work Experience:
Six years of experience with at least two years of experience with Cat equipment.
Must be proficient in at least two mechanical systems (i.e.
transmissions, engines, hydraulics, etc.) for numerous model lines.
Physical:
Must be able to daily and repeatedly stoop, kneel, bend, climb beside, onto and underneath various equipment to perfo...
....Read more...
Type: Permanent Location: Garner, US-NC
Salary / Rate: Not Specified
Posted: 2025-03-27 07:22:16
-
PRIMARY FUNCTION:
The primary function of this position is to troubleshoot, remove, install, replace, re-build, repair, & test parts/equipment on construction equipment at an expert level.
ESSENTIAL DUTIES:
* Check the equipment and supplies required to perform the work scheduled, comply with PPE requirements, and otherwise prepare for duties.
* Uses manuals, repair manuals, parts manuals, parts diagrams to perform independent troubleshooting and repair of construction equipment.
* Uses lift trucks, overhead cranes, & other aides to lift or move parts into position to be repaired.
* Uses hand & power tools to remove, install, replace, re-build, repair, & test parts/equipment on construction equipment.
* Be proficient at using resources and computers to reference parts, get information about parts & enter data into record systems.
* Uses tools to disassemble/re assemble parts or equipment; cleans parts with rags, cleaners, power washer; uses test equipment to make diagnostic checks; and controls powered equipment or tools to make repairs.
* Climbs up onto, under, & into vehicles to gain access to all parts of vehicle.
* Uses overhead hoists, lift devices, forklifts & other aides to move items off vehicle (tracks, idler wheels, blades, etc.) & then to move parts to locations for disassembly, repair, then back to the vehicle for reassembly.
* Proficient at performing inspections, do preventative maintenance, repair engine, power train, hydraulic and electrical components at an advance level on numerous model lines.
* Lift/carry and position ram used to remove idlers, unbolt idlers, remove them with
* Uses power washers & spray paint equipment to clean & paint vehicle.
* Uses instruments and computers to reprogram equipment controllers.
MINIMUM REQUIREMENTS:
Education:
Must have a high school education or GED.
Work Experience:
Eight years of Cat equipment experience.
Fully understands all equipment systems (i.e.
engines, hydraulics, electrical, sub-electrical, transmissions, etc.) for almost all equipment model lines.
Physical:
Must be able to daily and repeatedly stoop, kneel, bend and climb beside, onto and underneath various equipment to perform diagnosis and repairs; Must be able to effectively see to perform repairs, research technical manuals, and develop written repair work order reports.
Must be able to routinely and physically lift/position various parts to perform repairs/service and manually handle parts up to 112 pounds, as well as use mechanical hoist for heavier parts.
Other:
Must be able to effectively write repair activities on customer work orders; Must have cognitive reasoning and problem-solving skills to apply knowledge, written information and verbal instructions in repairing/servicing unusual and/or unknown technical equipment operational problems.
Should have exposure to P.C.
base equipment and parts information; Can work independently with minimal superv...
....Read more...
Type: Permanent Location: Mebane, US-NC
Salary / Rate: Not Specified
Posted: 2025-03-27 07:22:12
-
PRIMARY FUNCTION:
The primary function of this position is to troubleshoot, repair, rebuild, hydraulic cylinder parts & to restore equipment to proper operation.
ESSENTIAL DUTIES:
- Make the necessary preparations to perform work/repairs and comply with PPE requirements.
- Use pallet jacks, lift trucks, overhead cranes, & other aides to lift or move parts into position to be repaired.
- Installs, replaces, re-builds, repairs, & tests parts/equipment.
- Pressure washes & repaints components.
- Use miscellaneous resources and computers to reference parts, get information about parts & enter data into record systems.
- Use tools to disassemble/re assemble parts or equipment; lifts/carries parts; cleans parts with rags, cleaners, power washer; uses test equipment to make diagnostic checks; and controls powered equipment or tools to make repairs.
- Use overhead hoists, lift devices, forklifts & other aides to move items out of trucks to locations for disassembly, repair, & reassembly.
- Use powered equipment to do necessary grinding, honing, boring, drilling, & polishing, &, make replacement parts or refurbish parts before re-assembly, reassembles & tests units, & paints finished units.
MINIMUM REQUIREMENTS:
Education:
Must have a high school education or GED.
Work Experience:
Six years of experience with at least two years of experience on Cat or other similar equipment
Physical:
Must be able to daily and repeatedly stoop, kneel, bend and climb beside, onto and underneath various equipment to perform diagnosis and repairs.
Must be able to effectively see to perform repairs, research technical manuals, and develop written repair work order reports.
Must be able to routinely and physically lift/position various parts to perform repairs/service and manually handle parts up to 50 pounds, as well as use mechanical hoist for heavier parts.
Other:
Must be able to effectively write repair activities on customer work orders.
Must have cognitive reasoning and problem solving skills to apply knowledge, written information and verbal instructions in repairing/servicing unusual and/or unknown technical equipment operational problems.
Should have exposure to P.C.
base equipment and parts information.
This job description is not intended to be all-inclusive.
Your supervisor may request and assign you similar duties.
Any major modification of this job role requires Human Resources approval.
....Read more...
Type: Permanent Location: Raleigh, US-NC
Salary / Rate: Not Specified
Posted: 2025-03-27 07:22:11
-
PRIMARY FUNCTION:
The primary function of this position is to troubleshoot, remove, install, replace, re-build, repair, & test parts/equipment on construction equipment at an expert level.
ESSENTIAL DUTIES:
* Check the equipment and supplies required to perform the work scheduled, comply with PPE requirements, and otherwise prepare for duties.
* Uses manuals, repair manuals, parts manuals, parts diagrams to perform independent troubleshooting and repair of construction equipment.
* Uses lift trucks, overhead cranes, & other aides to lift or move parts into position to be repaired.
* Uses hand & power tools to remove, install, replace, re-build, repair, & test parts/equipment on construction equipment.
* Be proficient at using resources and computers to reference parts, get information about parts & enter data into record systems.
* Uses tools to disassemble/re assemble parts or equipment; cleans parts with rags, cleaners, power washer; uses test equipment to make diagnostic checks; and controls powered equipment or tools to make repairs.
* Climbs up onto, under, & into vehicles to gain access to all parts of vehicle.
* Uses overhead hoists, lift devices, forklifts & other aides to move items off vehicle (tracks, idler wheels, blades, etc.) & then to move parts to locations for disassembly, repair, then back to the vehicle for reassembly.
* Proficient at performing inspections, do preventative maintenance, repair engine, power train, hydraulic and electrical components at an advance level on numerous model lines.
* Lift/carry and position ram used to remove idlers, unbolt idlers, remove them with
* Uses power washers & spray paint equipment to clean & paint vehicle.
* Uses instruments and computers to reprogram equipment controllers.
MINIMUM REQUIREMENTS:
Education:
Must have a high school education or GED.
Work Experience:
Eight years of Cat equipment experience. Fully understands all equipment systems (i.e.
engines, hydraulics, electrical, sub-electrical, transmissions, etc.) for almost all equipment model lines.
Physical:
Must be able to daily and repeatedly stoop, kneel, bend and climb beside, onto and underneath various equipment to perform diagnosis and repairs; Must be able to effectively see to perform repairs, research technical manuals, and develop written repair work order reports. Must be able to routinely and physically lift/position various parts to perform repairs/service and manually handle parts up to 112 pounds, as well as use mechanical hoist for heavier parts.
Other:
Must be able to effectively write repair activities on customer work orders; Must have cognitive reasoning and problem-solving skills to apply knowledge, written information and verbal instructions in repairing/servicing unusual and/or unknown technical equipment operational problems.
Should...
....Read more...
Type: Permanent Location: Camden, US-NC
Salary / Rate: 35
Posted: 2025-03-27 07:22:06
-
The primary function of this position is to troubleshoot, remove, install, replace, rebuild, repair, and test parts/equipment on construction equipment at an advanced level while working in the field.
ESSENTIAL DUTIES:
Check the equipment and supplies required to perform the work scheduled, comply with PPE requirements, and otherwise prepare for duties.
Uses manuals, repair manuals, parts manuals, and parts diagrams to troubleshoot construction equipment.
Uses lift trucks, overhead cranes, and other aids to lift or move parts into position to be repaired.
Uses hand and power tools to remove, install, replace, rebuild, repair, and test parts/equipment on construction equipment.
Uses multiple resources and computers to reference parts, get information about parts, and enter data into record systems.
Uses tools to disassemble/reassemble parts or equipment; cleans parts with rags, cleaners, power washer; uses test equipment to make diagnostic checks; and uses powered equipment or tools to make repairs.
Climbs up onto, under, and into vehicles to gain access to all parts of vehicle.
Uses overhead hoists, lift devices, forklifts, and other aids to move items off vehicle (tracks, idler wheels, blades, etc.), and then to move parts to locations for disassembly, repair, then back to the vehicle for reassembly.
Performs inspections, do preventative maintenance, change oil, replace filters, belts, coolants, hoses, may drain/clean/refill fuel systems.
Uses welders to weld frames and use power grinders to grind welds smooth.
Lift/carry and position hydraulic rams used to install press fit items.
Uses power washers and spray paint equipment to clean and paint vehicle.
Uses instruments and computers to reprogram equipment controllers.
MINIMUM REQUIREMENTS:
Education:
Must have a high school education or GED.
Work Experience:
Six years of experience with at least two years of experience on Cat equipment or other similar equipment.
Must be proficient in at least two mechanical systems (i.e.
transmissions, engines, hydraulics, etc.) for numerous model lines.
Physical:
Must be able to daily and repeatedly stoop, kneel, bend and climb beside, onto, and underneath various equipment to perform diagnosis and repairs.
Must be able to effectively see to perform repairs, research technical manuals, and develop written repair work order reports.
Must be able to routinely and physically lift/position various parts to perform repairs/service and manually handle parts up to 112 pounds, as well as use mechanical hoist for heavier parts.
Other:
Must be able to effectively document repair activities on customer work orders.
Must have cognitive reasoning and problem solving skills to apply knowledge, written information, and verbal instructions in repairing/servicing unusual and/or unknown technical equipment operational problems.
Should have basic proficiency using P.C.
base equipment and parts information.
Can work independently with minimal supervision....
....Read more...
Type: Permanent Location: Greenville, US-NC
Salary / Rate: Not Specified
Posted: 2025-03-27 07:22:05
-
PRIMARY FUNCTION:
The primary function of this position is to perform expert level repairs on material handling equipment by trouble shooting using diagnostic equipment and manuals.
Use company tractor and trailer to pick up and return machines to customers.
DIMENSIONS:
ESSENTIAL DUTIES:
Ø Review the work schedule, check the equipment and supplies required to perform the work scheduled, comply with PPE requirements, and otherwise prepare for duties.
Ø Use manuals, repair manuals, parts manuals, parts diagrams to troubleshoot engines, engine fuel systems, transmissions, or other components on material handling equipment.
Ø Use lift trucks, overhead cranes, & other aides to lift or move parts into position to be repaired.
Ø Use hand & power tools to remove, install, replace, re-build, repair, & test parts/equipment on engines, engine fuel systems, transmissions, & other components.
Ø Use miscellaneous resources & computers to reference parts, get information about parts & enter data into record systems.
Ø Use hand & power tools to disassemble/re assemble parts or equipment, drains fluids into tubs, cleans parts with rags, cleaners, power washer.
Ø Climb up onto, under, & into vehicles, uses hand & power tools to disassemble/re assemble: sheet metal, engines, transmissions, fuel systems, & other parts or equipment.
Ø Replaces pumps, batteries, radiators, bearings, seals, wiring, solenoids, fuel lines, nozzles, tests float valves, glow plugs, alternators.
Ø Use overhead hoists to move parts that need to be moved off of & back onto the material handling vehicle.
Ø Use meters, measuring devices, & computers to test & recalibrate equipment, completes warranty paperwork.
Ø Drive Company Semi truck and trailer to pick up machines for repairs and return machines to customers
Ø Perform inspections, do preventative maintenance, change oil, replace filters, belts, coolants, hoses, may drain/clean/refill fuel systems.
MINIMUM REQUIREMENTS:
Education:
Must have a high school education or GED.
Work Experience:
Eight years of experience on Yale, Clark or other similar equipment; Fully understands all equipment systems (i.e.
engines, hydraulics, electrical, sub-electrical, transmissions, etc.) for almost all equipment model lines.
Physical:
Must be able to daily and repeatedly stoop, kneel, bend and climb beside, onto and underneath various equipment to perform diagnosis and repairs.
Must be able to effectively see to perform repairs, research technical manuals, and develop written repair work order reports.
Must be able to routinely and physically lift/position various parts to perform repairs/service and manually handle parts up to 95 pounds, as well as use mechanical hoist for heavier parts.
Other:
Must be able to effectively write repair activities on customer work orders.
Must have cognitive reasoning and problem-solving skills to apply knowledge, written information and verbal instructions in repairing/servicing unusual...
....Read more...
Type: Permanent Location: Covington, US-VA
Salary / Rate: Not Specified
Posted: 2025-03-27 07:22:03
-
This is a 2nd shift position from 2pm to 11 pm.
(exact hours may be negotiable) that includes a $4.00/hr shift differential, a company truck, laptop and cell phone.
PRIMARY FUNCTION:
The primary function of this position is to perform advanced level preventative maintenance services to ensure customer equipment is operating at maximum efficiency and productivity.
ESSENTIAL DUTIES:
* Change engine oil and filters, transmission oil and filters, hydraulic oil and filters, final drives and differential oils
* Lubricate all grease fittings
* Inspect and clean air induction system, replace air filters
* Inspect and make minor machine repairs
* Check for fluid leaks
* Inspect all hoses and belts
* Clean and/or change fuel filters
* Take fluid samples (engine, coolant, hydraulic, transmission, and final drives)
* Perform track adjustments/visual tracks inspections
* Inspect tires and valves, inflate to proper pressure
* Inspect hydraulic cylinders
* Inspect Ground Engaging Tools (Bucket teeth, cutting edges)
* Inspect braking systems
* Inspect safety equipment
* Maintain parts consignment
MINIMUM REQUIREMENTS:
Education:
Must have a high school education or GED.
Work Experience:
Six (6) years of experience with at least two (2) years of experience on Caterpillar or other similar equipment; Must be proficient in at least two mechanical systems (i.e.
transmissions, engines, hydraulics, etc.) for numerous model lines.
Physical:
Must be able to daily and repeatedly stoop, kneel, bend and climb onto and underneath various equipment to perform diagnosis and repairs.
Must be able to effectively see to perform repairs, research technical manuals, and develop written repair work order reports.
Must be able to routinely and physically lift/position various parts to perform repairs/service and manually handle parts up to 100 pounds, and manually handle parts up to 100 pounds, as well as use mechanical hoist for heavier parts.
Must be able to work in adverse weather.
Other:
Must be able to effectively document repair activities on customer work orders.
Must have cognitive reasoning and problem-solving skills to apply knowledge, written information and verbal instructions in repairing/servicing unusual and/or unknown technical equipment operational problems.
Should have basic proficiency using P.C.
base equipment and parts information; must work independently with minimal supervision.
Field Activity:
Must be able to daily operate an assigned service vehicle as well as be prequalified to operate under GPEC Fleet Policy Standards.
The driver must be able to operate their assigned vehicle for extended periods in order to reach customer's locations.
Must be able to effectively communicate using telephones to receive instructions and to provide service information.
Must be able to effectively deal directly with customers at site locations in a professional manner.
Additional:
Fie...
....Read more...
Type: Permanent Location: Raleigh, US-NC
Salary / Rate: Not Specified
Posted: 2025-03-27 07:21:57
-
PRIMARY FUNCTION:
The primary function of this position is to perform advanced repairs on materials handling equipment.
Perform necessary service, preventative maintenance, repairs, replacements, installations, or re-building of components to restore material handling equipment to proper operation.
ESSENTIAL DUTIES:
* Review the work schedule, check the equipment and supplies required to perform the work scheduled, comply with PPE requirements, and otherwise prepare for duties.
* Use manuals, repair manuals, parts manuals, parts diagrams to troubleshoot engines, engine fuel systems, transmissions, or other components on material handling equipment.
* Use lift trucks, overhead cranes, & other aides to lift or move parts into position to be repaired.
* Use hand & power tools to remove, install, replace, re-build, repair, & test parts/equipment on engines, engine fuel systems, transmissions, & other components.
* Use miscellaneous resources & computers to reference parts, get information about parts & enter data into record systems.
* Use hand & power tools to disassemble/re assemble parts or equipment, drains fluids into tubs, cleans parts with rags, cleaners, power washer.
* Climb up onto, under, & into vehicles, uses hand & power tools to disassemble/re assemble: sheet metal, engines, transmissions, fuel systems, & other parts or equipment.
* Replaces pumps, batteries, radiators, bearings, seals, wiring, solenoids, fuel lines, nozzles, tests float valves, glow plugs, alternators.
* Use overhead hoists to move parts that need to be moved off of & back onto the material handling vehicle.
* Use meters, measuring devices, & computers to test & recalibrate equipment, completes warranty paperwork.
* Perform inspections, do preventative maintenance, change oil, replace filters, belts, coolants, hoses, may drain/clean/refill fuel systems.
MINIMUM REQUIREMENTS:
Education:
Must have a high school education or GED.
Work Experience:
Six years of experience with at least two years of experience on Yale, Clark or other similar equipment; Must be proficient in at least two mechanical systems (i.e.
transmissions, engines, hydraulics, etc.) for numerous model lines.
Physical:
Must be able to daily and repeatedly stoop, kneel, bend and climb beside, onto and underneath various equipment to perform diagnosis and repairs.
Must be able to effectively see to perform repairs, research technical manuals, and develop written repair work order reports.
Must be able to routinely and physically lift/position various parts to perform repairs/service and manually handle parts up to 95 pounds, as well as use mechanical hoist for heavier parts.
Other:
Must be able to effectively write repair activities on customer work orders.
Must have cognitive reasoning and problem solving skills to apply knowledge, written information and verbal instructions in repairing/servicing unusual and/or unknown technical equipment ...
....Read more...
Type: Permanent Location: Leland, US-NC
Salary / Rate: Not Specified
Posted: 2025-03-27 07:21:53
-
PRIMARY FUNCTION:
The primary function of this position is to perform advanced level preventative maintenance services to ensure customer equipment is operating at maximum efficiency and productivity.
In the Fayetteville Area
ESSENTIAL DUTIES:
* Change engine oil and filters, transmission oil and filters, hydraulic oil and filters, final drives and differential oils
* Lubricate all grease fittings
* Inspect and clean air induction system, replace air filters
* Inspect and make minor machine repairs
* Check for fluid leaks
* Inspect all hoses and belts
* Clean and/or change fuel filters
* Take fluid samples (engine, coolant, hydraulic, transmission, and final drives)
* Perform track adjustments/visual tracks inspections
* Inspect tires and valves, inflate to proper pressure
* Inspect hydraulic cylinders
* Inspect Ground Engaging Tools (Bucket teeth, cutting edges)
* Inspect braking systems
* Inspect safety equipment
* Maintain parts consignment
MINIMUM REQUIREMENTS:
Education:
Must have a high school education or GED.
Work Experience:
Six years of experience with at least two years of experience on Cat equipment or other similar equipment; Must be proficient in at least two mechanical systems (i.e.
transmissions, engines, hydraulics, etc.) for numerous model lines.
Physical:
Must be able to daily and repeatedly stoop, kneel, bend and climb onto and underneath various equipment to perform diagnosis and repairs.
Must be able to effectively see to perform repairs, research technical manuals, and develop written repair work order reports.
Must be able to routinely and physically lift/position various parts to perform repairs/service and manually handle parts up to 110 pounds, and manually handle parts up to 100 pounds, as well as use mechanical hoist for heavier parts.
Must be able to work in adverse weather.
Other:
Must be able to effectively document repair activities on customer work orders.
Must have cognitive reasoning and problem solving skills to apply knowledge, written information and verbal instructions in repairing/servicing unusual and/or unknown technical equipment operational problems.
Should have basic proficiency using P.C.
base equipment and parts information; must work independently with minimal supervision.
Field Activity- Must be able to daily operate an assigned service vehicle as well as be prequalified to operate under GPEC Fleet Policy Standards.
The driver must be able to operate their assigned vehicle for extended periods in order to reach customer’s locations.
Must be able to effectively communicate using telephones to receive instructions and to provide service information.
Must be able to effectively deal directly with customers at site locations in a professional manner.
Additional: Field activities require a valid state driver’s license (obtain within 30 days of hire a valid license within the state of GPEC’s operation) A...
....Read more...
Type: Permanent Location: Fayetteville, US-NC
Salary / Rate: 28.525
Posted: 2025-03-27 07:21:50
-
PRIMARY FUNCTION:
The primary function of this position is to troubleshoot, remove, install, replace, re-build, repair, & test parts/equipment on construction equipment at an expert level.
ESSENTIAL DUTIES:
* Check the equipment and supplies required to perform the work scheduled, comply with PPE requirements, and otherwise prepare for duties.
* Uses manuals, repair manuals, parts manuals, parts diagrams to perform independent troubleshooting and repair of construction equipment.
* Uses lift trucks, overhead cranes, & other aides to lift or move parts into position to be repaired.
* Uses hand & power tools to remove, install, replace, re-build, repair, & test parts/equipment on construction equipment.
* Be proficient at using resources and computers to reference parts, get information about parts & enter data into record systems.
* Uses tools to disassemble/re assemble parts or equipment; cleans parts with rags, cleaners, power washer; uses test equipment to make diagnostic checks; and controls powered equipment or tools to make repairs.
* Climbs up onto, under, & into vehicles to gain access to all parts of vehicle.
* Uses overhead hoists, lift devices, forklifts & other aides to move items off vehicle (tracks, idler wheels, blades, etc.) & then to move parts to locations for disassembly, repair, then back to the vehicle for reassembly.
* Proficient at performing inspections, do preventative maintenance, repair engine, power train, hydraulic and electrical components at an advance level on numerous model lines.
* Lift/carry and position ram used to remove idlers, unbolt idlers, remove them with
* Uses power washers & spray paint equipment to clean & paint vehicle.
* Uses instruments and computers to reprogram equipment controllers.
MINIMUM REQUIREMENTS:
Education:
Must have a high school education or GED.
Work Experience:
Eight years of Cat equipment experience. Fully understands all equipment systems (i.e.
engines, hydraulics, electrical, sub-electrical, transmissions, etc.) for almost all equipment model lines.
Physical:
Must be able to daily and repeatedly stoop, kneel, bend and climb beside, onto and underneath various equipment to perform diagnosis and repairs; Must be able to effectively see to perform repairs, research technical manuals, and develop written repair work order reports. Must be able to routinely and physically lift/position various parts to perform repairs/service and manually handle parts up to 112 pounds, as well as use mechanical hoist for heavier parts.
Other:
Must be able to effectively write repair activities on customer work orders; Must have cognitive reasoning and problem-solving skills to apply knowledge, written information and verbal instructions in repairing/servicing unusual and/or unknown technical equipment operational problems.
Should have exposure to P.C.
base equipment and parts information; Can work...
....Read more...
Type: Permanent Location: Raleigh, US-NC
Salary / Rate: Not Specified
Posted: 2025-03-27 07:21:49
-
PRIMARY FUNCTION:
The primary function of this position is to perform routine mechanical repairs on construction equipment
DIMENSIONS:
ESSENTIAL DUTIES:
* Check the equipment and supplies required to perform the work scheduled, comply with PPE requirements, and otherwise prepare for duties.
* Uses manuals, repair manuals, parts manuals, parts diagrams to troubleshoot construction equipment.
* Uses lift trucks, overhead cranes, & other aides to lift or move parts into position to be repaired.
* Uses hand & power tools to remove, install, replace, re-build, repair, & test parts/equipment on construction equipment.
* Uses miscellaneous resources and computers to reference parts, get information about parts & enter data into record systems.
* Uses tools to disassemble/re assemble parts or equipment; cleans parts with rags, cleaners, power washer; uses test equipment to make diagnostic checks; and controls powered equipment or tools to make repairs.
* Climbs up onto, under, & into vehicles to gain access to all parts of vehicle.
* Uses overhead hoists, lift devices, forklifts & other aides to move items off vehicle (tracks, idler wheels, blades, etc.) & then to move parts to locations for disassembly, repair, then back to the vehicle for reassembly.
* Performs inspections, do preventative maintenance, repair engines, power train, hydraulic and electrical components.
* Usespower washers & spray paint equipment to clean & paint vehicle.
* Uses instruments and computers to reprogram equipment controllers.
MINIMUM REQUIREMENTS:
Education:
Must have a high school education or GED.
Work Experience:
Requires up to two years schooling or direct work experience; Must be mechanically inclined and have good basic knowledge obtained through schooling or work experience.
Physical:
Must be able to daily and repeatedly stoop, kneel, bend and climb onto and underneath various equipment to perform diagnosis and repairs; Must be able to effectively see to perform repairs, research technical manuals, and develop written repair work order reports. Must be able to routinely and physically lift/position various parts to perform repairs/service and manually handle parts up to 112 pounds, as well as use mechanical hoist for heavier parts.
Other:
Must be able to effectively write repair activities on customer work orders; Must have cognitive reasoning and problem-solving skills to apply knowledge, written information and verbal instructions in repairing/servicing unusual and/or unknown technical equipment operational problems; Should have exposure to P.C.
base equipment and parts information; Capable of learning and understanding technical information, service manuals and reports.
This job description is not intended to be all-inclusive. Your supervisor may request and assign you similar duties. Any major modification of this job role requires Human Resources approval.
....Read more...
Type: Permanent Location: Washington, US-NC
Salary / Rate: 21.525
Posted: 2025-03-27 07:21:47
-
PRIMARY FUNCTION:
The primary function of this position is to perform advanced mechanical repairs and assembly on compact construction, aerial and allied equipment by troubleshooting and using various diagnostic equipment.
ESSENTIAL DUTIES:
* Check the equipment and supplies required to perform the work scheduled, comply with PPE requirements, and otherwise prepare for duties.
* Uses manuals, repair manuals, parts manuals, parts diagrams to perform independent troubleshooting and repair of construction equipment.
* Uses lift trucks, overhead cranes, & other aides to lift or move parts into position to be repaired.
* Uses hand & power tools to remove, install, replace, re-build, repair, & test parts/equipment on construction equipment.
* Uses miscellaneous resources and computers to reference parts, get information about parts & enter data into record systems.
* Uses tools to disassemble/re assemble parts or equipment; cleans parts with rags, cleaners, power washer; uses test equipment to make diagnostic checks; and controls powered equipment or tools to make repairs.
* Climbs up onto, under, & into vehicles to gain access to all parts of vehicle.
* Uses overhead hoists, lift devices, forklifts & other aides to move items off vehicle (tracks, idler wheels, blades, etc.) & then to move parts to locations for disassembly, repair, then back to the vehicle for reassembly.
* Performs inspections, do preventative maintenance, repair engines, power train, hydraulic and electrical components.
* Uses power washers & spray paint equipment to clean & paint vehicle.
* Uses instruments and computers to reprogram equipment controllers.
MINIMUM REQUIREMENTS:
Education:
Must have a high school education or GED
Work Experience:
Requires four years of work experience with at least two years’ experience with CAT equipment; Must be proficient in at least two mechanical systems (i.e.
transmissions, engines, hydraulics, etc.) for numerous model lines.
Physical:
Must be able to daily and repeatedly stoop, kneel, bend and climb beside, onto and underneath various equipment to perform diagnosis and repairs; Must be able to effectively see to perform repairs, research technical manuals, and develop written repair work order reports.
Must be able to routinely and physically lift/position various parts to perform repairs/service and manually handle parts up to 112 pounds, as well as use mechanical hoist for heavier parts.
Other:
Must be able to effectively write repair activities on customer work orders; Must have cognitive reasoning and problem-solving skills to apply knowledge, written information and verbal instructions in repairing/servicing unusual and/or unknown technical equipment operational problems.
Should have exposure to P.C.
base equipment and parts information;
This job description is not intended to be all-inclusive.
Your supervisor may request and assign you similar duties.
Any major ...
....Read more...
Type: Permanent Location: Raleigh, US-NC
Salary / Rate: Not Specified
Posted: 2025-03-27 07:21:46
-
EQ - Master Shop Technician
PRIMARY FUNCTION:
The primary function of this position is to troubleshoot, remove, install, replace, re-build, repair, & test parts/equipment on construction equipment as an expert as well as lead and coach other technicians.
ESSENTIAL DUTIES:
* Check the equipment and supplies required to perform the work scheduled, comply with PPE requirements, and otherwise prepare for duties.
* Uses manuals, repair manuals, parts manuals, and parts diagrams to perform independent troubleshooting and repair of construction equipment.
* Uses lift trucks, overhead cranes, & other aides to lift or move parts into position to be repaired.Uses hand & power tools to remove, install, replace, re-build, repair, & test parts/equipment on construction equipment.
* Be proficient at using resources and computers to reference parts, get information about parts & enter data into record systems.
* Uses tools to disassemble/re-assemble parts or equipment; cleans parts with rags, cleaners, and power washers; uses test equipment to make diagnostic checks; and controls powered equipment or tools to make repairs.
* Climbs up onto, under, & into vehicles to gain access to all parts of the vehicle.
* Uses overhead hoists, lift devices, forklifts & other aides to move items off the vehicle (tracks, idler wheels, blades, etc.) & then to move parts to locations for disassembly, repair, then back to the vehicle for reassembly.
* Proficient at performing inspections, preventative maintenance, and repairing engine, power train, hydraulic, and electrical components at an advanced level on numerous model lines.
* Lift/carry and position ram used to remove idlers, unbolt idlers and remove them with
* Uses power washers & spray paint equipment to clean & paint vehicles.
* Uses instruments and computers to reprogram equipment controllers.
LEADERSHIP DUTIES:
* Assists supervisor with performance appraisals.
* Coach, guide, and develop technicians.
* Direct day-to-day job assignments and responsibilities for up to five or more technicians in the squad.
* Work with squad members to ensure proper T/S techniques are used to ensure that the product we turn out is a true representation of the customers’ and GPEC expectations.
MINIMUM REQUIREMENTS:
Education:
Must have a high school education or GED.
Work Experience:
Eight years of Cat equipment experience.
Fully understands all equipment systems (i.e.
engines, hydraulics, electrical, sub-electrical, transmissions, etc.) for almost all equipment model lines.
Physical:
Must be able to daily and repeatedly stoop, kneel, bend, and climb beside, onto, and underneath various equipment to perform diagnosis and repairs; Must be able to effectively see to perform repairs, research technical manuals, and develop written repair work order reports.
Must be able to routinely and physically lift/position various parts to perform repairs/service ...
....Read more...
Type: Permanent Location: Raleigh, US-NC
Salary / Rate: Not Specified
Posted: 2025-03-27 07:21:45
-
PRIMARY FUNCTION:
The primary function of this position is to troubleshoot, remove, install, replace, re-build, repair, & test parts/equipment on construction equipment at an advanced level with proficiency.
ESSENTIAL DUTIES:
* Check the equipment and supplies required to perform the work scheduled, comply with PPE requirements, and otherwise prepare for duties.
* Uses manuals, repair manuals, parts manuals, and parts diagrams to perform independent troubleshooting and repair of construction equipment.
* Uses lift trucks, overhead cranes, & other aides to lift or move parts into position to be repaired.
* Uses hand & power tools to remove, install, replace, re-build, repair, & test parts/equipment on construction equipment.
* Be proficient at using resources and computers to reference parts, get information about parts & enter data into record systems.
* Uses tools to disassemble/re-assemble parts or equipment; cleans parts with rags, cleaners, and power washers; uses test equipment to make diagnostic checks; and controls powered equipment or tools to make repairs.
* Climbs up onto, under, & into vehicles to gain access to all parts of the vehicle.
* Uses overhead hoists, lift devices, forklifts & other aides to move items off the vehicle (tracks, idler wheels, blades, etc.) & then to move parts to locations for disassembly, repair, then back to the vehicle for reassembly.
* Proficient at performing inspections, preventative maintenance, repair engines, power train, hydraulic and electrical components at an advanced level on numerous model lines.
* Lift/carry and position ram used to remove idlers, unbolt idlers, and remove them with
* Uses power washers & spray paint equipment to clean & paint vehicles.
* Uses instruments and computers to reprogram equipment controllers.
MINIMUM REQUIREMENTS:
Education:
Must have a high school education or GED
Work Experience:
Requires six years of experience with at least two years of experience on Cat equipment or other similar equipment; Must be proficient in at least four mechanical systems (i.e.
transmissions, engines, hydraulics, etc.) for numerous model lines.
Physical:
Must be able to daily and repeatedly stoop, kneel, bend, and climb beside, onto, and underneath various equipment to perform diagnosis and repairs; Must be able to effectively see to perform repairs, research technical manuals, and develop written repair work order reports. Must be able to routinely and physically lift/position various parts to perform repairs/service and manually handle parts up to 112 pounds, as well as use a mechanical hoist for heavier parts.
Other:
Must be able to effectively write repair activities on customer work orders; Must have cognitive reasoning and problem-solving skills to apply knowledge, written information, and verbal instructions in repairing/servicing unusual and/or unkno...
....Read more...
Type: Permanent Location: Raleigh, US-NC
Salary / Rate: Not Specified
Posted: 2025-03-27 07:21:43
